Wd-10485Tp Parts

This Top Cover is the upper cabinet panel that protects and finishes the top of the appliance, restoring a clean appearance and shielding internal components from dust and debris. It fits where the control console meets the lid or door area. What it does

• Covers and protects internal components at the top of the appliance from dust, moisture and accidental contact
• Restores the appliance's finished appearance and hides mounting hardware or wiring
• Helps reduce air drafts and limits debris ingress around the control area
• Supports proper alignment of the control console and adjacent trim when installed

• One Top Cover

• Disconnect power (unplug or switch off breaker) before starting any repair
• Remove any control console, trim, or fasteners as required to access and replace the top cover
• Handle edges carefully; wear gloves to avoid cuts and protect finished surfaces from scratches
• Reinstall all fasteners and test functions after reassembly

This water inlet cover protects and secures the refrigerator's water inlet assembly, helping keep the fill valve and tubing in place and reducing the risk of accidental damage. It restores the OEM fit and prevents exposure of inlet components. What it does:

• Shields the water inlet valve and connections from dirt and physical contact
• Helps hold the inlet tubing or hose in the correct position to avoid kinks
• Prevents gaps that can allow drips or moisture build-up around the inlet area
• Useful when a cracked, broken, or missing cover exposes the inlet

• Turn off water supply and unplug appliance before starting work
• Remove any access panels before removing the old cover; keep track of screws/clips
• Align the cover with the inlet assembly and snap or fasten into place; avoid forcing brittle plastic
• Inspect inlet tubing and valve while panel is off; restore power and water, then check for leaks

This power cord assembly supplies AC power to the appliance and restores safe operation after a damaged or faulty cord. It replaces the worn or frayed factory cord so the appliance can power on reliably. What it does

• Provides the main AC connection between the appliance and household power
• Replaces cords with visible damage, exposed wiring, burnt connectors, or intermittent power
• Helps stop arcing, sparking, or overheating caused by a failing cord
• Fits into the appliance's cord terminal block for a direct, plug-in power connection

• One power cord assembly

• Disconnect power at the breaker or unplug the appliance before starting any work
• Tighten all terminal screws securely and route the cord away from sharp edges and moving parts

The Valve Assembly, Inlet is an OEM part for LG washing machines. This valve assembly is responsible for controlling the flow of water entering the washer. It is designed with precision-engineered components to regulate water levels and pressure accurately during each cycle.  

Causes of a bad valve assembly can include a buildup of minerals or debris inside the assembly over time, wear from heavy or extended use, or damage to internal valve components.

Symptoms of a failing inlet valve assembly include:

• Incorrect or uneven water fill levels between cycles
• Abnormal noises or lack of sound when water is supposed to enter 
• Fluctuations in water pressure or temperature
• Inability to start or complete cycles due to water flow issues

Replacing the valve assembly with this new OEM part restores optimal water control. Proper water fill is essential for thorough cleaning and rinsing performance.

This LG replacement part is also compatible with Sears/Kenmore models.

This inlet hose delivers water from the household supply to the appliance for normal fill cycles. It restores proper water flow when the original inlet hose is damaged, cracked, or leaking. What it does:

• Channels incoming water from the household supply to the appliance's fill valve
• Replaces a worn, cracked, or leaking inlet hose to stop external leaks
• Helps restore normal fill and wash cycles affected by restricted or damaged hoses
• Fits as a direct replacement for the corresponding OEM inlet connection

• One inlet hose

• Disconnect power and shut off the water supply before starting any work
• Inspect fittings and replace any damaged clamps or seals to ensure a watertight connection
• Hand-tighten connections, then snug with a wrench—avoid over-tightening which can damage fittings
• Test for leaks by running a short fill cycle and checking all connections

This display power control board assembly powers and controls the appliance display and front-panel functions so the console lights and buttons respond correctly. It replaces a failed display module to restore visible status and user input. What it does

• Supplies power to the front display and regulates the panel's illumination
• Interfaces with the control electronics so touch or button inputs register
• Common symptom: display is blank or the panel backlight is out
• Common symptom: front-panel buttons or touch controls are unresponsive

• One display power control board assembly

• Disconnect power before starting; avoid electrical shock or damage to electronics
• Handle the board by its edges and avoid static discharge
• Retain and reuse any factory screws or brackets; verify connector orientation before reassembly

This replacement refrigerator door handle restores a secure grip and normal door operation after the original handle becomes cracked, loose, or broken. Durable replacement that matches the OEM fit to keep the door easy to open and close. What it does:

• Replaces a damaged or missing refrigerator door handle so you can open and close the door safely
• Provides the correct mounting points and grip profile for a proper fit and function
• Helps eliminate wobble, cracking, or sharp edges caused by a broken handle
• Restores appliance appearance when the original handle is scratched or discolored

• One refrigerator door handle

• High-level hardware replacement; use proper screwdrivers or socket tools as required
• Remove refrigerated items and open door fully to access mounting screws before replacing handle
• Tighten fasteners securely but avoid overtightening to prevent damage
• If wiring, sensors, or trim must be removed to access the handle, disconnect power first.

This display power control board supplies power and signaling to the appliance's control display so the front panel lights and electronic controls operate correctly. Replaces a failed display module to restore visible status and control feedback. What it does:

• Provides power and control signals for the front display and user interface
• Helps resolve a blank or unlit display on the control panel
• Restores display illumination and readable status indicators
• Can address unresponsive touch or button controls when the board is the fault

• Disconnect appliance power before removing or installing the control board to avoid shock or damage.
• Handle the board by its edges and avoid touching components; observe static-discharge precautions.