Wdf580afm2 Parts

This electronic control board manages the oven's user interface and cycle operations, restoring reliable control and consistent oven functions. It replaces a failed console board to help the oven accept settings and run selected bake/broil cycles. What it does:

• Controls user inputs, display, and command signals for oven functions
• Manages bake/broil timing and cycle selections so settings start and stop correctly
• Can resolve symptoms like unresponsive or blank control display, error codes, or intermittent cycle starts
• Works with existing wiring harness and user interface; does not include door, keypad, or sensors

• One electronic control board

• Disconnect power at the breaker before accessing or replacing the control board
• Handle the board by edges and avoid touching components or connector pins to prevent static damage
• Verify wiring harness connections and any related thermal sensors or switches during replacement
• If error codes persist after replacement, test related components (thermostat, sensors, door switches) per OEM diagnostics

The Clamp is an OEM part for Whirlpool dishwashers. It is used to secure various components and hoses within the dishwasher, ensuring they remain in place during operation.

Causes of a bad clamp can include wear and tear over time, exposure to high temperatures and moisture, or damage from improper installation or accidental impact. A compromised clamp can lead to loose connections, which may affect the dishwasher's performance.

Symptoms of a bad clamp include:

• Leaks from the dishwasher
• Loose or disconnected hoses or components
• Unusual noises during operation
• Decreased washing efficiency

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement door gasket helps restore a tight seal to the appliance, reducing leaks and improving cleaning/drying performance. It fits the original mounting channel and replaces worn or cracked seals for better operation. What it does:

• Creates a secure seal around the door to help prevent water or air leaks
• Helps maintain proper internal temperature and pressure for effective cycles
• Reduces noise and improves appliance efficiency by stopping drafts
• Commonly replaced when the existing gasket is torn, hardened, or missing

• One door gasket

• Inspect the mounting channel and clean debris before installing the new gasket
• Press gasket evenly into the channel and work around the entire perimeter to seat it fully
• Disconnect power and water supply (if applicable) before beginning work

The Wheel is an OEM component specifically designed for Whirlpool dishwashers. It is an important structural and functional part that provides smooth, stable dish rack(s) movement during each wash cycle. 

Symptoms of a bad wheel can include squeaking, scraping, or grinding noises emanating from below the dishrack. Friction causes increased wear over time.

Causes of failure are generally normal wear and tear. During cycle rotations, constant rolling and bearing loads gradually degrade wheel components like bearings, rollers, and housings.

Symptoms of a bad wheel include: 

• Noisy dishrack movement in and out  
• Rack binding or uneven rolling action
• Premature failure of other rack components from added stress

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This is an electrical wire-harness connector used to join wiring in the appliance. It restores a secure electrical connection so controls and components receive proper power and signaling. What it does:

• Provides a secure mating point between wiring harnesses or between a harness and a component
• Maintains proper electrical contact to prevent intermittent power or signal loss
• Commonly used where a detachable electrical connection is needed for service or assembly
• Can help address symptoms like intermittent operation, components not powering on, or visible damaged/loose plug ends

• Disconnect power to the appliance before inspecting or replacing any electrical connector
• Verify connector orientation and full engagement; bent terminals may need replacement
• Compare the replacement to the original to ensure terminal count, shape and locking feature match
• If wiring insulation or terminals are damaged, replace the harness

This inner door panel replaces a worn or damaged oven door interior to restore the door's structural support and proper fit. It keeps the outer door assembly intact so the door closes evenly and seals correctly. What it does:

• Serves as the interior panel of the oven door, providing structural support for the glass and trim
• Helps maintain proper door alignment and consistent sealing when closing
• Reduces vibration or rattling caused by a cracked or loose inner panel
• Restores a finished interior surface behind the outer door components

• One inner door panel

• Installation typically requires removing the oven door and separating the outer and inner panels; follow the oven model's disassembly diagram
• Handle glass and metal edges with care; wear gloves and eye protection to avoid cuts
• Keep track of screws and any clips during disassembly so the door reassembles correctly

This adapter connects and secures two appliance components to restore proper fit and alignment. It's a small replacement part that helps maintain proper connections and prevents leaks or loose fittings when the original adapter is damaged. What it does:

• Provides a secure mechanical connection between mating parts or hoses
• Restores proper alignment to prevent leaks or poor sealing
• Helps reduce vibration or movement at the joint
• Useful when the original adapter is cracked, worn, or missing

• Turn off power and/or water supply to the appliance before starting any repair
• Inspect mating surfaces for damage or debris and clean before installing the adapter
• Use appropriate hand tools; avoid overtightening which can crack plastic fittings

The Console is an OEM part for Whirlpool dishwashers. It houses the control buttons and digital displays protected behind a sturdy plastic face. The console is designed to stand up to steam, heat, and detergents through its water-resistant construction. 

Symptoms of a bad console can include cracks, clouding or discoloration of plastic, failing electronic components, or damage from leaks or impacts. 

Causes of a bad console include normal wear and tear over hundreds of wash cycles, exposure to excessive heat or chemicals over time, or accidental damage.

Symptoms of a bad console include:

• Non-responsive buttons 
• Glitches in the displays
• Water ingress into the interior
• Loose or missing faceplates

Color: White

This OEM Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This control panel is the user-facing console that houses the selector buttons and display, restoring normal control and clear readouts for your appliance. It replaces a cracked, faded, or unresponsive console surface and touch area. What it does:

• Provides the button surface and display area for selecting cycles and settings
• Protects and aligns underlying control switches and electronics
• Restores legible labels and a responsive touch/button interface
• Commonly replaces panels causing unresponsive buttons, missing labels, or cosmetic damage

• Disconnect power to the appliance before starting any repair
• Handle the panel carefully to avoid scratching or cracking the finish
• Remove mounting screws and clips to access the console; keep track of fasteners