Wdf7605adw2 Parts

Color: Bisque

This dispenser cover replaces a worn or damaged detergent lid to restore a clean seal and proper dispensing from the detergent drawer. It provides a neat finished appearance and helps keep detergent contained until release. What it does:

• Covers and seals the detergent compartment so detergent stays in place until the dispenser opens
• Helps the dispenser latch and release properly during wash cycles
• Prevents detergent residue and build-up on the surrounding area
• Restores a finished look when the original cover is cracked, broken or missing

• Disconnect power to the appliance before starting any service
• Usually installs with simple snaps or one/removable fastener; use a screwdriver if needed
• Handle the cover gently to avoid damaging clips or adjoining parts

This tab-sump mounting secures the dishwasher sump/dispenser area so detergent tabs and related components stay properly aligned. Replacing a worn or broken mounting restores correct dispenser positioning and helps prevent tabs from falling loose during cycles. What it does:

• Holds the tab/sump assembly in place to maintain proper detergent tab positioning
• Prevents the dispenser or sump from shifting or sagging during operation
• Helps reduce incidents of tabs dislodging or failing to stay seated
• Supports correct alignment of adjacent dispenser components

• Disconnect power and water supply before starting any repair
• Remove the door panel or access cover to reach the sump area
• Inspect surrounding clips and seals; replace any damaged fasteners for a secure fit

This support mounting bracket secures and aligns internal components to keep assemblies stable and operating smoothly. It helps prevent part movement that can cause noise, misalignment, or improper panel fit. What it does:

• Stabilizes and supports adjacent components or panels to reduce vibration and rattling
• Keeps doors or internal assemblies aligned for correct operation
• Prevents shifting that can lead to intermittent contact or wear
• Helps maintain proper spacing where a fixed mount is required

• Disconnect power or unplug the appliance before beginning work
• Handle sharp edges carefully and use the proper screwdriver or nut driver
• Reuse existing fasteners only if they are in good condition; replace stripped or damaged hardware

This air inlet damper controls cold-air flow from the freezer into the refrigerator compartment to help maintain proper fresh-food temperatures. Replacing a faulty damper restores balanced airflow and more consistent cooling. What it does:

• Regulates the amount of cold air entering the fresh-food section from the freezer.
• Opens and closes as the fridge cycles to maintain set temperatures.
• Commonly replaces stuck, broken, or noisy dampers that cause uneven cooling.
• Often used when the refrigerator is warm while the freezer remains cold or when temperatures fluctuate.

• Disconnect power to the appliance before starting any repair.
• Remove interior panels or grille per your model's service instructions to access the damper; keep screws and clips organized.
• Handle plastic fins and actuator gently to avoid damage; do not force the damper into position.
• Reconnect power and verify damper operation and temperature regulation after installation.

This replacement user interface housing secures and protects the appliance's control panel and touchpad components, restoring a clean, functional front surface for reliable button access and safe operation. What it does:

• Replaces a cracked, warped, or damaged control panel housing that exposes electronics
• Holds the touchpad, buttons, and display in correct alignment for proper operation
• Helps prevent moisture and debris from reaching internal controls and circuitry
• Can resolve symptoms like loose or non-seated buttons, rattling panel pieces, or visible housing damage

• One user interface/control panel housing

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Typical install requires removing the existing control panel and transferring the touchpad/display assembly; handle electronics and ribbon cables carefully
• Keep fasteners and small parts organized during disassembly; verify alignment before tightening screws

This main wire harness routes power and signals between an appliance's control and its electrical components, restoring reliable electrical connections for proper operation. Use when a damaged or broken harness causes control or power problems. What it does:

• Connects the control board, sensors, switches and motors to supply power and signal paths
• Replaces frayed, burned or broken wiring that can cause intermittent operation
• Helps stop symptoms like no power to components, controls not responding, or intermittent cycles
• Restores correct routing and secure connector fit for safe operation

• Disconnect all power before starting and verify the appliance is de-energized
• Take photos of the existing harness routing and connector positions before removal
• Route the new harness the same way and fully seat each connector; secure with clips or ties as needed
• If you see heat damage at connectors or terminals, replace harness and inspect mating components.

This spacer positions and supports the appliance tank/tub assembly to maintain proper alignment and spacing for reliable operation. Replaces a worn or damaged spacer to restore correct fit and reduce movement. What it does:

• Keeps the tank/tub assembly correctly spaced and aligned with the cabinet and mounting points
• Helps prevent rubbing, binding, and excess vibration caused by a missing or damaged spacer
• Restores proper clearance to support seals and hoses that rely on correct tank positioning
• Useful when reassembling the appliance after service or repair

• One spacer

• Disconnect power and water supply before starting any repair
• Access may require removal of outer panels, console, or access covers depending on model
• Handle parts carefully to avoid damaging surrounding seals and wiring; reuse fasteners unless replacement is specified

This control bracket secures the console or control housing to the appliance, keeping the control panel stable and properly aligned for reliable operation. Replaces a damaged or missing bracket to restore secure mounting and prevent panel movement. What it does:

• Mounts the control console to the appliance frame to prevent wobbling or sagging
• Keeps control buttons and switches aligned for consistent user operation
• Helps stop rattling or vibration noise caused by a loose control housing
• Supports wiring and components behind the console to reduce strain on connectors

• Always unplug the appliance or disconnect power before beginning service
• Remove the console or access panel per service instructions to reach mounting points
• Use appropriate screwdrivers or nut drivers; keep original hardware unless damaged
• Align bracket and tighten screws evenly; avoid overtightening to prevent stripping

This name plate is the decorative centennial badge that restores the appliance's exterior appearance and branding. It replaces a missing, damaged, or faded badge to keep the unit looking factory-finished. What it does

• Restores the appliance's exterior badge for a like-new appearance
• Replaces badges that are cracked, scratched, peeling, or discolored
• Helps identify the appliance style when the original emblem is missing
• Cosmetic part only — does not affect appliance operation

• One name plate

• For best results, clean the mounting area and remove dirt or wax before installation
• Handle carefully to avoid scratching the finish; use non-marring tools as needed
• If access behind trim is required, unplug the appliance or disconnect power before removing panels
• Follow OEM instructions for removal and reinstallation to avoid damaging clips or surrounding trim

This wire harness routes power and signals between the appliance's control components and motors, switches, and sensors to restore reliable electrical connections. Replacing a damaged harness returns proper circuit routing and connection integrity. What it does

• Connects control board outputs to motors, switches, sensors, and other electrical components
• Restores broken, frayed, or corroded wiring that can cause intermittent or no operation
• Helps eliminate faults caused by loose or damaged connectors and open circuits
• Supports normal communication between components so controls can operate correctly

• One replacement wire harness as shown

• Disconnect power at the breaker or unplug the appliance before starting any work
• Compare the new harness to the original for connector type, length, and terminal locations before installation
• Route wiring away from sharp edges and moving parts; secure with existing clips or ties

The Door Hinge (RH) is an OEM replacement part for Whirlpool dishwashers. This hinge is installed on the right-hand side of the dishwasher door, allowing it to open and close smoothly while maintaining the proper tension and alignment. The hinge plays a crucial role in ensuring the door seals securely during operation, preventing leaks and enabling efficient cleaning performance.

Common causes include regular use leading to wear and tear, accidental impacts, or exposure to moisture, which can contribute to rust or corrosion.

Symptoms of a bad door hinge include:

• The dishwasher door not closing completely
• Difficulty opening or closing the door
• A sagging or misaligned door
• Unusual noises when moving the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement handle restores a solid, comfortable grip so you can operate your appliance as intended. It replaces a damaged, loose, or missing handle to bring back clean looks and everyday usability. What it does

• Provides a secure grip for opening and closing the appliance
• Restores normal operation when the original handle is cracked, broken, or missing
• Helps prevent wobbling or rattling caused by a loose handle
• Maintains proper user access to the door or drawer

• Handle

• Disconnect power to the appliance before starting; allow hot surfaces to cool
• Support the door or drawer if removal is required to access fasteners
• Transfer and reuse original screws/end caps if applicable; tighten evenly and do not overtighten
• After installation, verify the handle is secure and the door/drawer operates smoothly

The Adjuster Housing is an OEM part for Whirlpool dishwashers. It ensures the smooth and secure adjustment of the dishwasher's right rack. It provides a stable platform for the rack adjuster, allowing you to easily customize the spacing and arrangement of your dishes for cleaning.

Causes of a bad rack adjuster housing include:

• Regular wear and tear
• Accidental impacts or mishandling
• Exposure to water and cleaning agents

A damaged or worn-out rack adjuster housing can occur due to regular use, accidental impacts, or exposure to water and cleaning agents. If you notice symptoms such as the right rack not sliding smoothly, difficulty in adjusting the rack's position, or a loose and unstable rack, it may be time to replace the rack adjuster housing.

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.