Wdp4v Parts

Replace worn, broken, or missing caster wheels on your portable dishwasher. This 4-pack restores smooth rolling and easy positioning while protecting floors.

Replaces cracked, broken, or missing lower access panel on your dishwasher. Covers the base opening for a finished look and shields internal parts.

This small clip prevents the upper dish rack from sliding too far forward when pulled out of the dishwasher. It acts as a safety stop to keep the rack from falling out completely during loading and unloading. Replace this part if your upper rack slides out too far or falls out when you pull it forward.

The Inlet Hose is an OEM part for Whirlpool built-in dishwasher models. This hose delivers fresh water from the household supply to the appliance spray arms and pumps. 

Symptoms of a faulty inlet hose include:

• Leaks or drips around hose connections  
• Kinks or cracks in the supply line tubing
• Restricted or no water flow to critical systems
• Improper water levels causing wash performance issues

Causes can be deformation from tight bends over time. Mineral buildup inside the hose is also common with extended use. Accidental damage during plumbing work presents another potential cause.

This authentic Whirlpool replacement is compatible with some Maytag, Jenn-Air and Amana dishwasher brands as well.

This hose clamp secures dishwasher hoses to fittings and ports to maintain a tight, leak-resistant seal. Replacing a worn clamp helps prevent drips and loose connections that can cause water under the unit.

• Secures drain or circulation hose to the pump, sump, or other dishwasher fittings
• Helps maintain a watertight seal at hose connection points
• Can help resolve water dripping from a hose joint or a loose hose
• Replace if corroded, deformed, cracked, or no longer holds tension

• Disconnect power and turn off the water supply before servicing
• Place a towel or shallow pan to catch residual water when removing hoses
• Fully seat the hose on the fitting, position the clamp over the barb/connection, and secure firmly
• After reassembly, run a brief fill/drain and check all connections for leaks

Dishes not getting clean or water not circulating? This dishwasher pump and motor assembly restores proper water flow through spray arms. Moderate DIY.

The dishwasher rack repair kit provides components to fix damaged dish racks, including replacement wheels, tines, and clips. Use this kit when rack wheels break, tines bend or snap off, or the rack becomes difficult to slide in and out smoothly.

The Nut is an OEM replacement part for Whirlpool dishwashers. It is a small part that secures the kickplate, or the lower front panel of the dishwasher, in place. This nut ensures a secure and tight fit for the kickplate, preventing it from becoming loose or falling off during dishwasher operation. 

A bad nut can occur due to wear and tear, accidental damage, or misplacement. If you notice symptoms such as a loose or wobbly kickplate, or if the kickplate has completely detached from the dishwasher, it may indicate a faulty or missing kickplate nut.

Symptoms of a bad nut include:

• Loose or wobbly kickplate
• Kickplate completely detached from the dishwasher

Restore your dishwasher by replacing the faulty or missing kickplate nut with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Replaces cracked, worn, or missing insulation pad in your dishwasher. Installs between components or panels to reduce vibration and heat transfer.

Fixes dirty water or food specks remaining after wash cycles. This check valve prevents backflow into the dishwasher sump. Moderately easy repair.

Complete dishwasher installation kit with mounting brackets, screws, and clamps. Replace missing or damaged hardware for secure undercounter installation.

Base bracket that holds the leveling foot at the washer cabinet. Replace if cracked, broken, or missing to restore stability and prevent rocking or vibration.

Weak spray or noisy dishwasher? This circulation pump assembly restores water pressure and cleaning performance. Moderate DIY repair for most models.

Replace your dishwasher's console door seal when you notice water leaks or gaps between the console and door. Verify fit with your model number.

This dispenser is the door-mounted assembly that delivers ice and/or water from the refrigerator. It replaces a worn, cracked, or malfunctioning dispenser to restore normal dispensing and stop leaks. What it does:

• Provides a finished dispenser opening and support for the actuator and chute so water and ice flow correctly.
• Stops leaks and prevents food or debris from entering the dispenser area when cracked or damaged.
• Restores proper activation when the dispenser lever or paddle no longer engages the valve or auger.
• Helps eliminate jams or misalignment that can cause intermittent dispensing or noisy operation.

• Disconnect power and shut off the water supply before starting any work.
• Remove the inner door panel or trim to access the dispenser mounting screws and wiring.
• Handle gently to avoid cracking surrounding trim; test operation before reassembling the door.

This accessory assembly is the factory-specified kit used to attach or secure designated parts on your appliance. Replacing missing or worn pieces restores a solid, factory fit and finish.

• Provides the original mounting/attachment components specified for your model
• Replaces lost or damaged hardware after installation, moving, or service
• Helps correct loose, misaligned, or rattling parts caused by missing fasteners
• Maintains proper alignment and appearance of exterior parts such as trim or handles

• Disconnect power; also shut off water and/or gas supplies before servicing
• Protect finished surfaces; start fasteners by hand to avoid cross-threading or damage
• Follow your model's service or installation guide for correct order and placement
• After assembly, verify everything is secure and test operation before returning to service