Wdp86802 Parts

This small structural bracket supports the "leg" of an interior shelf or drawer assembly in compatible refrigerators. It helps keep shelves level and stable so bins slide smoothly and contents stay secure during everyday use. What it does:

• Supports the corner/leg of an interior shelf, cover, or drawer rail
• Helps maintain level alignment and prevents wobble or sagging
• Restores stability if the original piece is cracked, warped, or missing
• Common symptoms: shelf or drawer sags, binds, or rattles; poor fit/alignment

• 1 supporter leg

• Disconnect power and remove food from the affected area before starting
• Remove the shelf/drawer and note fastener locations or locking tabs
• Transfer any reusable screws/clips and seat the new supporter fully
• Reinstall components, ensuring the shelf/drawer sits level and moves freely

Size: 10-32 inch.

Replacement lower dish rack bar that restores support and alignment to the dishwasher's lower rack. It helps keep dishes steady and the rack running smoothly so dishes get proper wash coverage and don't tip. What it does

• Replaces a broken, bent, or missing bar that supports the lower dish rack
• Restores rack stability so plates and glasses stay upright during a cycle
• Helps the lower rack glide evenly along the track for smooth sliding
• Replaces corroded or chipped hardware that can expose dishes to rough edges

• Remove the lower rack from the dishwasher before installing the bar to avoid injury and for easier access.
• Wear gloves to protect your hands from sharp edges and damaged coating.
• Inspect rack clips, rollers and adjacent components during replacement; replace any worn parts for best fit.
• Follow your model's service manual or parts diagram for model-specific steps and proper reassembly.

Restore worn dishwasher racks and help prevent rust stains on dishes. This white rack repair kit covers chipped or exposed rack tines and caps bare metal to reduce corrosion and extend the useful life of your racks.

• Re-coats rusted or chipped vinyl on rack tines to help stop corrosion
• Caps exposed tips to reduce rust transfer, scratching, and snags
• Useful when tine caps are missing or the rack coating is flaking
• Common symptoms: rust on tines, stained dishes, sharp/rough tine ends

• Disconnect power and remove the rack before repair
• Clean and dry affected areas thoroughly before applying coating
• Apply in a well-ventilated area; allow full cure time before using the dishwasher
• Replace the rack if metal is severely corroded or broken

This leg support secures the adjustable leveling foot to the appliance's base. Replacing a damaged or stripped support restores a solid mounting point so you can properly level the unit and reduce rocking and vibration. What it does

• Provides the mounting point for the leveling leg; anchors to the base/frame
• Helps keep the appliance level and stable during operation
• Replace if cracked, bent, or the threads are stripped
• Common symptoms: rocking or unstable unit, excessive vibration/rattling, doors out of alignment, leveling foot won't hold adjustment

• 1 leg support

• Disconnect power; shut off water or gas supply if applicable
• With a helper, carefully tip and support the unit to access the base safely
• Remove fasteners, transfer or thread the existing leveling leg into the new support, and reinstall
• Set the appliance down and level it on all corners; verify stability

The Dishrack Track Mount is an OEM part for Whirlpool dishwashers. It secures the dishracks in place to allow proper loading and unloading of dishes during washing cycles.

Symptoms of a bad track mount include:

• Dishracks not sliding smoothly or getting stuck/binding
• Excessive noise or rattling coming from the dishracks  
• Visible damage or cracks in the mount
• Dishracks falling out of place during washing

Causes of failure can be prolonged usage stressing the plastic material over time, exposure to hot conditions weakening its integrity, or impact rupturing components. 

It is compatible with select KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper models.

Color: Almond

This latch actuator links the door lock mechanism on select ranges and wall ovens, engaging and releasing the door as designed. Replacing a worn or bent actuator restores smooth latch movement and reliable door locking during normal use and self-clean cycles. What it does:

• Transfers motion within the latch assembly to lock and unlock the oven door
• Helps the door lock engage for self-clean and release when complete
• Addresses issues like a door that won't lock/unlock or latch fully
• Can resolve incomplete self-clean cycles caused by a misaligned or damaged latch linkage

• 1 latch actuator

• Disconnect power at the breaker before servicing
• Access the latch assembly per your model's service/parts diagram
• Note the actuator's orientation and any linkage/spring positions before removal
• Verify smooth manual latch operation before reassembling and restoring power

This is the front retaining rail for the 2nd and 3rd level door bins on select refrigerators. It restores a secure barrier so items stay put and refreshes the clean, finished look of your door storage. What it does:

• Secures items on the 2nd and 3rd level door bins to help prevent tipping or spills
• Replaces a cracked, warped, discolored, or missing rail
• Helps the bin seat properly on the door when the original rail is damaged
• Typical symptoms include broken front trim, items falling from the bin, or difficulty reinstalling the bin

• One door bin rail

• Disconnect power before servicing for safety
• Remove the bin from the door and release the old rail from its locking tabs
• Align the new rail and snap it onto the bin; verify correct orientation for the 2nd/3rd level bin
• Reinstall the bin, ensuring it is fully seated in the door supports

This dishwasher rack wheel replaces a worn or broken wheel so the rack glides smoothly on its track. Restore easy in-and-out movement and proper alignment to help prevent tilting or derailment during loading and unloading.

• Guides and supports the rack as it rolls along the rail
• Maintains proper rack alignment and spacing during use
• Replaces cracked, worn, or missing wheel components
• Symptoms include sticking or uneven rack movement, derailment, or scraping/clicking noises

• Disconnect power and turn off the water supply before servicing
• Pull the rack out; release and remove the damaged wheel from its mount
• Snap the new wheel securely in place and ensure it spins freely
• Reinstall the rack on the rails and verify smooth, even movement

This tube nut secures the water inlet tubing to its fitting, creating a tight, leak-resistant connection. Use it when the original nut is cracked, stripped, or can no longer hold the line securely.

• Tightens over the inlet fitting to clamp the water tube and form a reliable seal
• Helps stop drips at the water-line connection point
• Addresses loose or damaged inlet connections and difficulty keeping the tube seated
• Commonly replaced when the nut is worn, cross-threaded, or visibly cracked

• Disconnect power and shut off the water supply before servicing
• Place a towel to catch residual water and relieve line pressure
• Hold the fitting with one wrench while tightening the nut with another to avoid twisting components
• Do not overtighten; restore water and check for leaks after installation
• Inspect the tubing, ferrule/sleeve, and insert; replace if worn or damaged

Black

Color: White. Size: 2 oz. can. Porcelain touch-up paint.

This adjustable leveling leg threads into the appliance base to set height and stabilize the cabinet. Replacing a worn or missing leg helps stop rocking and vibration and helps maintain proper alignment for reliable operation.

• Provides adjustable support at one corner of the appliance
• Helps level the unit for correct alignment with floor or cabinetry
• Reduces rocking, vibration, and rattling noises
• Replaces stripped, bent, cracked, or missing leg

• Disconnect power and, if applicable, shut off water before servicing
• Carefully support or brace the appliance to access the base safely
• Start the new leg by hand to avoid cross-threading; adjust height gradually
• Use a level to check side-to-side and front-to-back, then recheck after positioning

This machine screw secures panels, brackets, and other components inside your appliance. Replacing a missing or damaged fastener restores a solid fit, reduces vibration and rattling, and helps keep assemblies properly aligned for reliable performance.

• 10-32 machine-thread fastener for mounting and securing internal parts and panels
• Helps maintain alignment and structural integrity of assembled components
• Replaces missing, stripped, or damaged hardware
• Reduces rattling, vibration, or loosening from worn fasteners

• Disconnect power; shut off gas or water supplies before servicing
• Match thread and length to the original fastener used in that location
• Start by hand to avoid cross-threading; tighten snugly without overtightening
• Reuse original washers or clips if present and in good condition

Replacement 8-32-thread screw used to secure panels, brackets and small components in compatible household appliances. Restores missing or stripped fasteners so panels and parts stay firmly attached during normal use. What it does:

• Secures trim, panels, brackets and control housings to maintain proper assembly.
• Replaces missing or damaged screws that can cause rattling, loose panels or misaligned components.
• Fits locations that require an 8-32 threaded fastener; correct length and head style for your application.
• Helps restore stable, vibration-free operation when worn or stripped fasteners are replaced.

• Disconnect power and water before servicing; wear eye protection and gloves.
• Use the correct screwdriver or driver bit to avoid stripping the screw head.
• Do not overtighten—turn until snug and secure to avoid damaging threads or surrounding parts.
• If the original used a washer or nut, reuse or replace as needed and the screw length and head type match the original.