Wdp86802 Parts

This support is a small structural bracket that helps secure internal components and keeps the appliance aligned for reliable operation. It restores proper fit and reduces movement where a worn or broken support allows shifting. What it does

• Holds internal panels or assemblies in the correct position to prevent rubbing and noise
• Restores alignment to doors, drawers, or mounted components that sag or sit unevenly
• Reduces vibration and rattling caused by loose or missing support
• Prevents further wear on fasteners and nearby parts by keeping components stable

• One support bracket

• Disconnect power (and water, if applicable) before starting any repair
• Use basic hand tools; some trims or panels may need removal for access
• Keep track of fasteners and bracket orientation before tightening

This wire harness is the factory-style electrical assembly that links controls to components, restoring reliable power and signal routing so your appliance operates properly. It replaces a damaged or worn wiring assembly. What it does

• Routes power and control signals between the main control and appliance components
• Restores intermittent or non-functioning circuits caused by frayed, pinched, or broken wires
• Helps eliminate electrical shorts from damaged insulation or loose connections
• Useful when diagnostics find open circuits or faulty connector plugs

• One wire harness assembly as shown

• Disconnect power to the appliance before starting any repair
• Compare harness connector shapes and pin counts to the original before installation
• Secure harness away from sharp edges, heat sources and moving parts to prevent damage

Bottle with brush. Color: Harvest Gold. It's 0.6 fluid ounces.

These are replacement countertop mounting screws that secure the appliance to the countertop or cabinet, restoring a stable, flush fit and preventing movement or gaps. Sold as a 2-pack for quick, direct replacement. What it does

• Secures the appliance countertop or trim to the cabinet or counter to keep the unit from shifting.
• Helps eliminate rocking, gaps, or uneven alignment caused by missing or loose mounting screws.
• Restores proper fit and finish where original mounting hardware has been lost or damaged.
• Works with factory mounting points and standard driver heads for straightforward replacement.

• Two countertop mounting screws.

• Use the correct-size driver to avoid stripping the screw head.
• Tighten until snug; avoid over-tightening which can strip threads or damage the cabinet/countertop.
• Keep original brackets and hardware; replace only the missing or damaged screws as needed.

This push button is a replacement control panel button that restores a responsive tactile switch on your appliance. It provides a simple, user-facing interface for selecting cycles or options. What it does:

• Replaces a worn, broken, or missing control panel button so selections can be made reliably
• Restores tactile feedback for accurate button presses
• Helps resolve symptoms such as unresponsive or stuck buttons and cosmetic damage to the panel
• Designed to fit the original button location and align with the underlying switch mechanism

• One (1) push button

• Install by removing the appliance control panel or trim per your model's service instructions
• Ensure power is disconnected before attempting replacement to avoid shock or damage
• Handle the button and surrounding bezel carefully to avoid bending clips or scratching the panel

This hose clamp secures flexible hoses to fittings to prevent leaks and keep connections tight on dishwashers and similar appliances. It's a simple replacement that restores a secure hose seal and prevents water from escaping. What it does

• Holds a drain or water hose firmly to a barb or fitting to stop leaks
• Restores a tight connection when original clamp is corroded, cracked, or loose
• Helps prevent water pooling beneath the appliance and related drip issues
• Typical use: clamp for dishwasher drain/water hose connections

• One hose clamp as pictured

• Disconnect power and shut off water supply before servicing the appliance
• Slide clamp over hose, seat hose fully on the fitting, then tighten clamp evenly until snug
• Replace any corroded or damaged clamps; do not overtighten

This 3-channel feedtube routes water to the appliance's dispenser/ice system to ensure proper delivery where needed. Replaces a damaged or cracked feedtube to help restore correct water flow and reduce leaks. What it does:

• Directs water through three separate channels to the ice maker/dispenser plumbing
• Prevents cross-flow between channels for reliable filling and dispensing
• A damaged tube can cause leaks, weak dispensing, or the ice maker not filling
• Fits the OEM routing to maintain correct water pressure to downstream components

• One 3-channel feedtube

• Disconnect power and shut off the water supply before servicing
• Handle carefully to avoid kinking; inspect and replace any worn seals or grommets
• Tighten connections evenly to prevent leaks; check for leaks after restoring power/water
• Use manufacturer diagrams to confirm routing and orientation during installation

This dishwasher air gap prevents backflow from the sink into the dishwasher drain line, helping keep wastewater out of the appliance and reducing odors. It provides a simple, code-friendly way to vent the drain hose at the sink. What it does:

• Creates an air break in the dishwasher drain to prevent soiled water from flowing back into the machine
• Helps the dishwasher drain properly and reduces standing water in the tub or sink
• Reduces odors and contamination risk caused by backflow through the drain hose
• Works with most standard sink-mount dishwasher drain hose setups

• Designed for sink-mount installation; follow sink and dishwasher manufacturer instructions and local plumbing codes
• Use appropriate hose clamps and a secure hose connection to prevent leaks
• Inspect and clean the air gap periodically to remove debris

This is a genuine replacement mounting screw used to secure appliance panels and components. It restores proper fit and helps prevent rattling or loose parts for safe, reliable operation. What it does:

• Fastens panels, trim pieces, or internal components to maintain proper alignment
• Secures parts that can vibrate or become loose during normal use
• Helps stop rattling, squeaks, or gaps caused by missing or damaged fasteners
• Suitable wherever the OEM specifies part 154041001 as the required screw

• Turn off and unplug the appliance before starting any repair
• Use the correct screw hole and match thread engagement; do not force or cross-thread
• Tighten firmly but avoid over-torquing to prevent stripped threads or cracked panels
• If multiple or different screws were removed, keep track of each location for correct reassembly

A Taptite screw used to fasten sheet metal and plastic appliance panels. This self-tapping fastener secures trim, brackets, and internal components for a reliable hold during normal use. What it does:

• Creates its own threads in metal/plastic for a tight, vibration-resistant connection
• Commonly used to secure control panels, trim pieces, and mounting brackets
• Helps stop rattles and keeps panels aligned when properly installed
• Compatible with repair and maintenance tasks where original fasteners are required

• Use the correct sized driver and steady pressure to avoid stripping the head
• Start straight and drive slowly until snug; do not over-tighten
• Wear eye protection when working with small fasteners and metal panels
• Replace any damaged or stripped screws with the exact OEM fastener

Rubber bumper. Color: Grey.

Size: 10-16 x 1 1/2 inch.

This replacement fan blade circulates air inside the appliance to help maintain proper cooling and airflow. A direct-fit blade restores air movement for consistent temperature distribution and efficient operation. What it does:

• Spins on the motor shaft to move air across the evaporator or condenser for cooling
• Helps prevent hot or cold spots by promoting even airflow through the compartment
• Can reduce frost buildup and assist the compressor by improving heat exchange
• Worn or damaged blades may cause vibration, noise, or reduced cooling performance

• One replacement fan blade

• Disconnect power before servicing to avoid electrical shock or injury
• Handle the blade carefully to avoid bending; balance issues can cause noise or motor strain