Wdp86802 Parts

This support bracket helps hold internal components in place to restore proper alignment and reduce movement. It's a simple replacement that stabilizes the affected assembly and helps stop rattling or sagging. What it does:

• Secures and supports a loose or misaligned internal component or panel
• Prevents shifting that can cause vibration, noise, or uneven operation
• Restores proper alignment to reduce wear on adjoining parts
• Functions as the OEM replacement for the original support bracket

• One support bracket

• Inspect the mounting points and surrounding parts for wear before installing
• Replace only with the matching OEM part number to ensure fit; fasten securely per manufacturer torque recommendations
• Disconnect power and follow basic safety precautions before servicing the appliance

The Inner Door Vent is an OEM part for Whirlpool dishwashers. It plays an important role in moisture removal by allowing airflow out of the dishwasher during operation. Proper ventilation is important for the drying performance and prevention of mold growth.

Causes of a bad inner door vent can be cracks, breaks or deformities restricting airflow. This may occur due to normal use over years of use or accidental impact damage.

Symptoms of a bad inner door vent include:

• Dishes not drying fully
• White film residue left behind
• Mold or mildew growth inside machine
• Poor ventilation causing increased drying times

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Tub Insulation is an OEM part for Whirlpool dishwashers. It is installed behind the wash tub and functions to reduce noise, retain heat, and increase energy efficiency during cleaning cycles.

Causes of damaged insulation are normally longer-term deterioration from repeatedly high heat and moisture exposures during operation. Physical deterioration and loss of insulating properties occur over many years of use.

Symptoms of bad tub insulation include:

• Excessive noise emanating from the dishwasher interior
• Higher energy costs due to reduced insulation capabilities
• Slower cycle times as more power is needed to reach optimal temperatures

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This feed tube assembly channels water where it belongs in the appliance, restoring proper flow and preventing misdirected or leaking water. Designed as a two-level, green plastic tube for direct replacement of the original part. What it does:

• Routes water from the inlet to the correct internal channels to support normal appliance operation
• Helps prevent leaks or puddling caused by cracked or clogged feed tubes
• Replaces damaged, warped, or discolored tubing that can interrupt water flow
• Can resolve symptoms like water dribbling inside the cabinet, poor dispensing, or intermittent water flow

• Disconnect power and water supply before starting any repair
• Inspect mating seals and clips; replace if damaged to ensure a watertight fit
• Handle plastic fittings carefully to avoid cracking; tighten connections per OEM guidance

The Dishwasher Drip Tray is an OEM part for Whirlpool dishwashers. It collects excess water and rinse aid during the wash and rinse cycles, protecting internal components from exposure to liquids. As a critical part, the drip tray supports smooth drainage and prevents puddling inside the dishwasher.

Symptoms of a bad drip tray can include:

• Puddling or pooling of water inside the dishwasher tub
• Leaks onto the floor over time from the drainage area
• Water marks or corrosion of internal surfaces
• Improper drainage of water after cycles 

Causes of a bad drip tray may be cracks, leaks, or damage to the drainage channels over time. Failure could also result from mineral buildup blocking proper drainage.

This OEM Whirlpool part is also compatible with Maytag, Jenn-Air, Amana, some KitchenAid, and select Kenmore dishwasher models. 

Replacement screw used to secure appliance panels and components. Small but essential, it restores proper fit and helps prevent rattling, misalignment, or parts coming loose after repair or service. What it does:

• Secures panels, trim, brackets and small appliance components to restore correct alignment and fit.
• Replaces missing, stripped or damaged fasteners that allow parts to shift or vibrate.
• Helps stop rattling or loose parts that can occur during operation.
• Works as a direct hardware replacement where this exact screw is specified.

• Disconnect power (and gas if applicable) before servicing the appliance.
• Use the correct size screwdriver or driver bit to avoid cam-out or stripped heads.
• Install with firm, even pressure—do not over-tighten to avoid stripping threads or cracking plastic parts.
• Replace with the exact OEM screw when specified to ensure correct fit and function.

Replacement clip adjuster arm for the appliance adjuster mechanism. Secures and positions the adjuster assembly to restore proper alignment and help reduce rubbing, misalignment, and excessive noise caused by a broken or worn clip. What it does:

• Secures and holds the adjuster assembly in the correct position.
• Restores proper alignment to moving assemblies to prevent rubbing or binding.
• Can reduce unusual noises or vibration caused by a loose or broken clip.
• Commonly replaced when the clip is cracked, bent, missing, or no longer holds.

• Disconnect power (and gas if applicable) before beginning any repair.
• Basic hand tools may be required; panel or component removal could be necessary to access the clip.
• Handle sharp edges and inspect adjacent fasteners or mating clips; replace any damaged hardware.

This replacement screw secures appliance panels, brackets, and internal components so they stay tight and rattle-free. Use it to replace missing, stripped, or corroded hardware and restore a safe, secure assembly.

• Fastens panels, brackets, covers, or assemblies to the appliance cabinet/frame
• Helps prevent vibration, rattling, and loosening during operation
• Replaces hardware that is missing, worn, rusted, or stripped
• Common signs you need this screw: loose or misaligned parts, rattling noises, or a cover that won't stay on

• Disconnect power; shut off water or gas if applicable before servicing
• Match length and thread to the original and replace like-for-like locations
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly without overtightening to prevent stripping plastic or sheet metal

This temperature sensor detects appliance temperature and sends readings to the control board so the unit can maintain proper cooking or cooling cycles. Replaces a failed sensor to restore accurate temperature monitoring and stable operation. What it does:

• Senses internal temperature and communicates readings to the control board
• Helps maintain consistent temperature during heating or cooling cycles
• Stops erratic cycling, incorrect temperature displays, or related error codes
• Common fix when oven, range or refrigerator temperature is off or inconsistent

• One temperature sensor

• Disconnect power to the appliance before servicing to avoid shock or damage
• Handle the sensor and connector carefully; avoid pulling wires or bending sensing tip
• Plug into the factory harness; secure sensor per the appliance's original routing

This Tube-Feed supplies water to the appliance's ice/water system, restoring proper water flow to the ice maker or dispenser. A direct-fit replacement that helps stop reduced ice production or interrupted water delivery. What it does:

• Routes incoming water from the inlet to the ice maker or dispenser assembly
• Restores proper water flow when the original tube is cracked, kinked, or clogged
• Helps stop leaks or puddling caused by damaged tubing when installed correctly
• Works with the appliance's original fittings and seals to maintain a secure connection

• One Tube-Feed

• Disconnect power and shut off the water supply before starting any repair
• Inspect fittings and seals; replace any damaged clamps or gaskets for a watertight connection
• Avoid sharp bends or kinks when routing the tube; secure with existing clips
• Turn water back on and check all connections carefully for leaks before restoring power

This inner door panel replaces a cracked or damaged inner door to restore the appliance's interior finish and provide the correct mounting surface for door hardware. It matches the OEM shape for a factory fit and appearance. What it does:

• Replaces a damaged or dented inner door panel to improve appearance and function
• Provides the correct mounting surfaces for trim, handles, and internal components
• Helps protect internal parts from moisture and debris when the door is closed
• Restores proper fit and alignment with the outer door assembly

• One inner door panel

• Disconnect power (and water supply for appliances with water connections) before beginning work
• Handle edges and any attached glass or trim carefully—wear gloves to protect hands
• Use original fasteners where possible; keep screws and clips organized during removal
• After installation, check door alignment and operation before returning the appliance to service

This genuine OEM mount is a small but essential mounting bracket that secures internal components in place for reliable operation and reduced vibration. It helps restore proper alignment and stops rattling or loose parts. What it does:

• Secures an internal appliance component to the cabinet or frame to prevent movement
• Stabilizes parts to reduce vibration, noise, and wear
• Restores proper alignment after a broken or worn mounting point
• Works as the fixed attachment point shown in the appliance's parts diagram

• Disconnect power (and water if appliance uses water) before beginning work
• Use basic hand tools; support the component being removed to avoid drops or damage
• Check the surrounding fasteners and mounting surfaces and replace any damaged screws or clips

Color: White

This is an electrical wire-harness connector used to join wiring in the appliance. It restores a secure electrical connection so controls and components receive proper power and signaling. What it does:

• Provides a secure mating point between wiring harnesses or between a harness and a component
• Maintains proper electrical contact to prevent intermittent power or signal loss
• Commonly used where a detachable electrical connection is needed for service or assembly
• Can help address symptoms like intermittent operation, components not powering on, or visible damaged/loose plug ends

• Disconnect power to the appliance before inspecting or replacing any electrical connector
• Verify connector orientation and full engagement; bent terminals may need replacement
• Compare the replacement to the original to ensure terminal count, shape and locking feature match
• If wiring insulation or terminals are damaged, replace the harness

This tube-feed is the replacement water feed tube that routes water between the supply and internal components, restoring proper water delivery and stopping leaks. It fits into the factory water path to replace damaged or clogged tubing. What it does:

• Directs water from the supply line to internal dispenser/ice-maker plumbing
• Restores proper water flow when original tube is cracked, kinked, or clogged
• Helps prevent leaks caused by damaged or brittle tubing
• Supports reliable operation of ice/water dispensing systems

• One tube-feed replacement

• Disconnect power and shut off the water supply before beginning work
• Inspect connections and seals; replace any worn clamps or gaskets as needed
• Avoid sharp bends or kinks when routing the tube; ensure secure fittings