Wdt710phaz1 Parts

Fix dishwasher leaks from the tub floor with this overfill protector housing. Guides the float and positions the switch actuator to restore protection.

This dishwasher rinse aid dispenser knob mounts on the inner-door dispenser and lets you set the rinse-aid dosage. Replace a cracked, stripped, or missing knob to restore easy adjustment and consistent rinse-aid use during the rinse/dry cycle.

• Adjusts the rinse-aid dispensing level on the dispenser
• Restores a secure, readable setting pointer for dosage control
• Common symptoms: knob broken or missing, won't stay on, can't turn or adjust settings, stripped splines
• Helps address inconsistent rinse-aid use when the setting can't be changed

• Disconnect power to the dishwasher before servicing
• Open the door; pull the old knob straight off (gently pry evenly if needed to avoid damage)
• Align the new knob with the flat/splines and press on; it turns through the full setting range
• On some models, accessing retainers may require removing inner-door screws—refer to your service information

Mounting screw that secures panels, brackets, and internal components in refrigerators and dishwashers. Replace when stripped, missing, or loose.

Upper rack dishes not getting clean? This feed tube assembly routes water to the upper spray arm, restoring balanced coverage. Moderate DIY repair.

Secures water inlet tubing to create a leak-resistant seal. Replace if cracked, stripped, or unable to hold the line securely. Confirm fit with your model.

Insulation pad that fits behind dishwasher panels to restore thermal protection and reduce noise. Replace if damaged, missing, or rattling occurs.

Secures lightweight cups, lids, and small containers in your dishwasher rack. Replace when clips crack or lose grip. Confirm fit with your model number.

This replacement screw secures appliance panels and components so they stay tight and aligned. Replace a missing, rusty, or stripped fastener to restore a solid hold and reduce vibration or rattling during operation. What it does:

• Fastens and secures panels, brackets, trim, or internal components as specified for your model
• Replaces missing, corroded, or stripped hardware to restore a proper fit
• Helps prevent vibration, rattling, and misalignment caused by loose fasteners
• Addresses issues like a loose panel/handle or a screw head that's rounded off

• 1 screw

• Disconnect power; if applicable, shut off gas and water before servicing
• Use the correct driver size; start by hand to avoid cross-threading
• Tighten snugly—do not overtighten into plastic or thin sheet metal
• Keep track of original screw locations and lengths during reassembly

Replacement 8-32-thread screw used to secure panels, brackets and small components in compatible household appliances. Restores missing or stripped fasteners so panels and parts stay firmly attached during normal use. What it does:

• Secures trim, panels, brackets and control housings to maintain proper assembly.
• Replaces missing or damaged screws that can cause rattling, loose panels or misaligned components.
• Fits locations that require an 8-32 threaded fastener; correct length and head style for your application.
• Helps restore stable, vibration-free operation when worn or stripped fasteners are replaced.

• Disconnect power and water before servicing; wear eye protection and gloves.
• Use the correct screwdriver or driver bit to avoid stripping the screw head.
• Do not overtighten—turn until snug and secure to avoid damaging threads or surrounding parts.
• If the original used a washer or nut, reuse or replace as needed and the screw length and head type match the original.

Stainless steel screw that secures the back panel to the side panel of your dryer cabinet. Replace if screw is stripped, missing, or corroded.

This is the outer control panel that sits at the top front of the dishwasher door, featuring a stainless steel finish. It houses the buttons and display area used to select wash cycles and settings. Replace this panel if it is dented, corroded, discolored, or if the button labeling has worn off.

Color: Black. Size: 12 oz. Acrylic appliance aerosol can spray paint.

This is an electronic control and display board assembly that serves as the user interface on the dishwasher door. It contains the buttons, indicators, and circuitry that allow you to select wash cycles, options, and monitor the status of the machine. Replace this board if the control panel is unresponsive, displays erratic behavior, shows error codes, or if certain buttons no longer function.

This adjustable leveling leg threads into the appliance base to set height and stabilize the cabinet. Replacing a worn or missing leg helps stop rocking and vibration and helps maintain proper alignment for reliable operation.

• Provides adjustable support at one corner of the appliance
• Helps level the unit for correct alignment with floor or cabinetry
• Reduces rocking, vibration, and rattling noises
• Replaces stripped, bent, cracked, or missing leg

• Disconnect power and, if applicable, shut off water before servicing
• Carefully support or brace the appliance to access the base safely
• Start the new leg by hand to avoid cross-threading; adjust height gradually
• Use a level to check side-to-side and front-to-back, then recheck after positioning

Fix a dishwasher that won't start cycles, has display issues, or heating problems. This main control board manages timing and functions. DIY install.

Factory #10-16 screw secures dishwasher panels, brackets, and covers. Replace worn, stripped, or missing screws to restore tight assembly.