Wed8500dc Parts

This genuine front control panel restores the appliance's user interface and cosmetic appearance, providing the correct openings and mounting points for switches and buttons. It replaces cracked, dented, or worn panels to make controls accessible and look like new. What it does

• Replaces a damaged or cracked front control surface so buttons and displays sit correctly
• Covers and protects underlying control components from spills and debris
• Restores proper alignment and fit of control buttons and trim
• Helps resolve issues caused by cosmetic damage or missing button openings

• Disconnect power at the breaker or unplug the appliance before starting any repair
• Remove only the panels and fasteners required to access the control panel; retain mounting hardware
• Handle edges carefully to avoid cuts and to prevent scratching the finish
• If the panel secures switches or displays, verify electrical connections and proper seating during reassembly

The Door is an OEM replacement part for Whirlpool electric and gas dryers. Designed to provide controlled access to the drying drum interior, it is also fitted with view glass for visibility into the tumbling load.

Causes of a bad door can be wear and tear of moving components over repeated cycles, damage allowing air leakage, or blockages inhibiting proper operation. 

Symptoms include:

• Loose, sagging, or misaligned door positioning  
• Inability to open or close smoothly
• Air leaks reduce drying efficiency
• Faulty door switches disrupting dryer run times  

This OEM Whirlpool replacement door is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore brand electric and gas dryers.

This elbow redirects a fluid or air line inside the appliance to allow routing around components and tight spaces. It restores proper flow path and helps stop leaks or blockages when the original elbow is cracked or worn. What it does:

• Provides a sealed change of direction for a water, drain, or vent line inside the appliance
• Replaces a cracked or broken elbow that can cause leaks, water pooling, or reduced flow
• Re-establishes the correct routing to prevent kinks and stress on connected hoses or tubing
• Helps eliminate intermittent draining or venting issues caused by a damaged fitting

• Disconnect power and shut off water supply before accessing the part
• Verify orientation and routing before removing the old elbow to ensure correct reinstallation
• Inspect and replace any worn clamps, gaskets, or hoses when installing the new elbow
• Tighten fittings to secure but avoid over-tightening which can crack plastic components

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This is a replacement mounting nut that secures appliance components and helps keep panels, assemblies and fasteners tight for stable operation. A simple, OEM-fit nut for repair or maintenance. What it does

• Fastens and secures assemblies, brackets or panels to prevent loosening during use
• Helps reduce vibration and rattling caused by loose hardware
• Restores proper component alignment when a stripped or missing nut causes movement
• Fits in the same location and function as the original factory nut

• Inspect the mating bolt/stud and threads; replace damaged hardware before installing the nut
• Tighten to the appliance manufacturer's specified torque where available; avoid over-tightening
• Use hand tools appropriate for the nut size to prevent rounding the hex
• Disconnect power or follow manufacturer safety instructions before servicing electrical appliances

The Console is an OEM part for Whirlpool dryers. This white component houses the control panel, where users can select drying cycles, adjust settings, and monitor the progress of their laundry. The console also provides protection to the internal electronics, ensuring they remain safe from dust and moisture while allowing for easy user interaction.

Causes of a faulty dryer console can include damage from impact, wear and tear over time, or electrical malfunctions within the control panel. Such issues can impair the functionality of the dryer or render the control panel unresponsive.

Symptoms of a bad dryer console include:

• Buttons or dials not responding
• Display issues such as flickering or failure to light up
• Inability to select or change drying cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Console is an OEM part for Whirlpool dryers. This red component houses the control panel, where users can select drying cycles, adjust settings, and monitor the progress of their laundry. The console also provides protection to the internal electronics, ensuring they remain safe from dust and moisture while allowing for easy user interaction.

Causes of a faulty dryer console can include damage from impact, wear and tear over time, or electrical malfunctions within the control panel. Such issues can impair the functionality of the dryer or render the control panel unresponsive.

Symptoms of a bad dryer console include:

• Buttons or dials not responding
• Display issues such as flickering or failure to light up
• Inability to select or change drying cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

A direct-replacement outer door assembly that restores a secure, finished closure and helps keep heat and moisture contained. Designed to fit the original mounting points for a factory-style repair. What it does:

• Replaces a cracked, dented, or cosmetically damaged outer door to restore appearance and sealing
• Provides a stable mounting surface for the inner window and latch components
• Helps prevent heat or steam from escaping during operation
• Reduces rattling or vibration caused by a bent or loose door

• Disconnect power and allow the appliance to cool before starting any repair
• Use appropriate hand tools and keep track of removed screws and fasteners for reassembly
• Align door hinges and latch carefully; test operation before returning the appliance to service
• Replace those parts separately as needed

This cover is the outer console panel that protects and finishes the appliance's control area, restoring a clean appearance and shielding controls from dirt and moisture. It's the exact replacement piece used on compatible Whirlpool control assemblies. What it does

• Protects the control components and wiring from spills, dust, and everyday wear
• Restores the appliance's finished look by replacing a cracked, faded, or damaged console cover
• Helps keep buttons and switches aligned and accessible for reliable operation
• Prevents debris from entering the control cavity, which can reduce the risk of malfunctions

• One cover

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Remove any retaining screws or clips securing the old cover, then lift or slide it off per the service diagram
• Align the new cover with the mounting points and secure with the original fasteners—do not force or bend the part

This exhaust pipe routes exhaust air from the appliance to the home vent, restoring proper airflow for safe, efficient operation. Use when the original pipe is cracked, bent, or leaking. What it does:

• Channels exhaust gases and lint from the appliance to the external vent
• Prevents exhaust leaks that can cause poor drying or cooking performance
• Helps maintain correct airflow to reduce overheating and moisture buildup
• Fits where a damaged or corroded exhaust connection needs replacement

• One exhaust pipe

• Disconnect power (and gas if applicable) before servicing; follow appliance safety procedures
• Inspect surrounding seals and clamps; replace clamps or ducting if damaged
• Secure pipe with OEM-recommended fasteners and ensure vent path is clear

This exhaust pipe vents hot, moist air from the dryer to the home venting system, helping the appliance dry clothes efficiently and reduce indoor humidity. Replace a damaged or restricted pipe to restore proper airflow. What it does:

• Channels dryer exhaust air safely from the appliance to the exterior vent
• Helps prevent overheating and long dry times caused by restricted airflow
• Reduces lint buildup in the appliance by providing a clear vent path
• Commonly replaced when cracked, crushed, kinked, or badly corroded

• Disconnect power to electric dryers; shut off gas supply and disconnect for gas dryers before servicing
• Inspect existing vent path for additional damage or lint buildup and clean before installing
• Position pipe without sharp bends or kinks and secure with appropriate clamps or fasteners