Wee745hofs1 Parts

This inner oven door liner replaces the damaged or warped inner panel that supports the oven door glass and helps contain heat inside the oven cavity. It restores a solid mounting surface for door glass and internal components. What it does:

• Provides the inner structural panel for the oven door and supports the door glass and insulation.
• Helps maintain proper oven heat containment to support uniform cooking.
• Prevents direct exposure of insulation and internal parts to oven cavity heat and food debris.
• Addresses symptoms like visible cracks, warping, or detached glass mounting points on the inside of the door.

• Disconnect power before starting any repair and follow manufacturer's safety instructions.
• Remove the oven door per the appliance manual to access and replace the inner liner; handle glass and sharp edges carefully.
• Keep all original screws and mounting clips; confirm screw locations during disassembly to ensure proper reassembly.
• If the door has multiple glass panels or seals, verify placement during reassembly—do not force parts into position.

This replacement oven cavity insulation helps contain cooking heat and protects nearby components for more even baking and safer operation. It restores the oven's thermal barrier when old insulation is damaged or missing. What it does

• Provides thermal protection for the oven cavity and surrounding cabinet components
• Helps reduce heat loss for more consistent oven temperatures during use
• Limits heat transfer to adjacent parts and control areas to prevent overheating
• Commonly replaced when insulation is torn, burned, compressed, or missing

• One oven cavity insulation piece as shown

• Disconnect power to the appliance before starting any repair; unplug or switch off the circuit breaker
• Remove oven panels or racks as needed to access the insulation; follow the oven's service manual for panel removal
• Handle insulation with care; wear gloves and a dust mask if materials are fibrous or dusty
• Reinstall panels and restore power only after insulation and clearances are confirmed per the manufacturer's guidance

This replacement screw secures appliance panels and components to restore proper fit and prevent rattling or movement. It's a direct-fit fastening part used where the original OEM screw is specified. What it does:

• Secures trim, access panels, or internal components to maintain structural fit
• Prevents vibration noise and loose parts by holding assemblies firmly
• Matches OEM fit and threading for correct engagement when used in original locations
• Intended for repairs that require the exact replacement fastener

• Disconnect power and unplug the appliance before starting any repair
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic

This replacement pan is the appliance's drip tray that catches and channels condensate or minor spills to help prevent water from pooling inside the cabinet. It restores proper water collection and reduces the risk of internal leaks. What it does:

• Collects condensate, drips or minor leaks from the evaporator/hoses and channels it to the drain area
• Helps prevent water from pooling beneath components that could cause odor or corrosion
• Restores the appliance's intended water-management function when a cracked or warped pan causes leaks
• Suitable when you see standing water, dripping inside the cabinet, or water under the appliance

• One replacement pan as pictured

• Turn off and unplug the appliance (or shut off power at the breaker) before servicing
• Remove access panels or shelving as needed to reach the pan; keep track of fasteners
• Inspect surrounding hoses and mounts for damage while the pan is out; replace damaged parts as required

This drawer panel replaces a damaged or worn front for a refrigerator drawer, restoring the appliance's appearance and helping the drawer seal and operate correctly. Fits as the visible front for a single refrigerator drawer. What it does

• Replaces a scratched, dented, or cracked drawer front to improve appearance
• Restores proper alignment and contact with drawer slides and trim
• Helps maintain correct drawer movement and access to stored items
• Useful when original panel is bent or cosmetic finish is compromised

• One replacement drawer panel

• High-level swap: remove drawer assembly, detach old panel, and fasten replacement with existing clips/screws
• Use care to avoid scratching the new finish during installation
• Wear gloves to protect hands from sharp edges and disconnect power if working near electrical components
• Source OEM fasteners for correct fit

White

This genuine replacement part is a control panel. The control panel is responsible for sending signals to determine the oven's various functions. Attached to the buttons, the control panel's circuits allow for the temperature and timer to be adjusted on the oven. Over time, the control panel can become overworked and eventually give out. Luckily, replacing a control panel is a simple process.To replace the control panel, first, make sure that the circuit breaker is off and the oven is unplugged. Pull out the oven to gain access to the back of the range. Locate the upper back panel and remove screws to expose the back of the control board. Pop out the old control panel and take note of any wires that are connected. Unplug the wires from the control board, and re-secure them into the new part. Place it back to its original space, and re-secure the back panel of the range.This is OEM replacement part for a control board is sold individually and is compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, and Roper ovens.

This is the control panel for an electric range. This part houses the controls for the appliance. A new control panel may be needed if none of the controls are working. This could vary from burners not working, timers not working, or the display is blank. The repair person can also inspect the part for any signs of burning or broken wires. This would indicate a faulty control panel. A multimeter can also be used to test the elements and see if they are good or not. Replacing this part is a fairly easy process that can be done within 15 minutes. Make sure to disconnect the electric range from its power source prior to attempting to replace this part.The control panel is sold individually. It comes straight from the manufacturer and is a high-quality part. This specific control panel is compatible with ranges that are manufactured by Whirlpool.