Weg730hodso Parts

This burner baffle is a replacement heat shield that protects the range cooktop and burner assembly from spills and directs heat for more consistent cooking. Durable design helps keep burner components cleaner and working properly. What it does:

• Shields burner components from drips, spills, and food debris that can cause clogging or uneven flame
• Helps channel heat from the burner for more consistent surface heating
• Reduces direct exposure of internal parts to corrosive residues, extending component life
• Can stop rattling or misalignment caused by a damaged or bent baffle

• Disconnect gas supply and electrical power and allow the range to cool fully before servicing
• Handle edges carefully; baffle may have sharp metal edges or be spring-tensioned into place
• Installation typically requires removing grates and lift-off parts to access the burner area; follow OEM instructions

The Burner Knob is an OEM replacement part for Whirlpool ranges. It is designed to control the individual burners on your range, allowing you to adjust the heat levels for cooking.

A bad burner knob can occur due to wear and tear, damage, or malfunction. If you notice symptoms such as difficulty turning the knob, a loose or wobbly fit, or the inability to adjust the burner heat properly, it may be time to replace the burner knob.

Symptoms of a bad burner knob include:

• Difficulty turning the knob
• Loose or wobbly fit
• Inability to adjust the burner heat properly

Repair your range by replacing the faulty or damaged burner knob with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Color: Stainless

This insert is a small OEM component designed to fit into a specific location on your appliance to secure, align, or finish an assembly. Replacing a worn, damaged, or missing insert restores proper fit and clean appearance.

• Provides a snug interface or cover within the designated assembly
• Helps prevent looseness, vibration, or gaps in the connected part
• Replaces cracked, worn, or missing insert pieces
• Common symptoms include loose or wobbly parts, misalignment, or a missing cap/cover

• Disconnect power and shut off gas/water before servicing
• Refer to your model's parts diagram to confirm location and orientation
• Use non-marring tools to avoid cosmetic damage
• Seat the insert fully; do not overtighten adjacent fasteners

This spark module supplies the high-voltage pulses that ignite the surface burners on a gas cooktop or range. Replacing a failing module helps restore consistent clicking and spark so burners light promptly and reliably.

• Supplies high-voltage to up to five surface igniters (5+0 configuration)
• Sends spark when a burner control is turned to Lite
• Failure symptoms can include no spark on all or multiple burners
• May also cause intermittent/weak spark or continuous clicking

• Disconnect power and shut off gas before servicing
• Note wire locations; move one connector at a time to matching terminals
• Mount securely in the original position and ensure proper grounding
• After replacement, if only one burner won't ignite, inspect that burner's switch and igniter

This surface burner igniter creates the spark that lights a gas cooktop or range burner. The attached wire lead simplifies hookup and helps restore quick, dependable ignition when a burner won't light or only lights intermittently.

• Generates a high-voltage spark at the burner to ignite gas
• Restores reliable burner lighting and consistent flame startup
• Common symptoms: burner won't ignite, no visible spark, intermittent lighting, or a chipped/cracked ceramic insulator
• Replaces a worn or damaged electrode to eliminate the need for manual lighting

• Disconnect electrical power and shut off gas before servicing
• Allow the cooktop/range to cool; handle the ceramic tip carefully to avoid damage
• Match the igniter position/orientation to the original for proper spark at the burner
• Route the lead away from sharp edges and heat; make a secure connection to the harness, then test for spark before reassembly

The Range Bracket-Glass (White) is an OEM part for Whirlpool ranges. It is designed to support and secure the glass surface or cooktop in place, ensuring stability during operation. This bracket is essential for maintaining the proper alignment and positioning of the glass panel.

Causes of a damaged bracket can include repeated exposure to heat and stress during cooking, accidental impacts, or improper installation. Over time, the material may weaken, crack, or warp, compromising its ability to hold the glass securely.

Symptoms of a bad bracket include:

• Loose or wobbly glass cooktop
• Visible cracks or damage to the bracket
• Gaps between the glass and the frame
• Difficulty securing the glass properly during reassembly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

This mounting bracket secures a component or panel to the appliance frame, keeping it aligned and stable during operation. Replace a cracked or bent bracket to stop looseness, rattling, or shifting and restore proper support.

• Anchors the specified component or panel to the chassis
• Maintains correct position and spacing for reliable operation
• Helps reduce vibration and noise from a loose mount
• Common symptoms: broken or missing bracket, bent metal, sagging/misaligned component, difficulty fastening parts

• Disconnect power before service; shut off water supply if applicable
• Note orientation and fastener locations; transfer existing screws/clips if needed
• Support the component while removing/installing the bracket to prevent strain
• Tighten fasteners evenly; avoid overtightening to prevent damage

This stainless-steel trim assembly restores the finished look and protective edge of the appliance fascia. It replaces a damaged, dented, or missing trim piece to help seal and finish the control/vent opening. What it does

• Replaces worn, dented, or scratched trim to restore appliance appearance
• Covers and protects the edge of the fascia or opening from dirt and damage
• Helps keep the control/vent area sealed and neat-looking
• Stops rattles or gaps caused by a loose or missing trim piece

• One stainless-steel trim assembly

• Disconnect power to the appliance before starting any work
• Basic hand tools typically required; remove adjacent panels or fasteners to access the trim
• Handle stainless trim carefully to avoid scratches; use a soft cloth when positioning

This saddle-style gas valve controls gas flow to the appliance, letting technicians create a safe, serviceable gas connection. It's used where a saddle/tap-style inlet is required for supplying natural gas to the unit. What it does:

• Provides a saddle-mounted gas shutoff and inlet for an appliance connection
• Restores gas flow when a damaged or leaking saddle valve prevents operation
• Commonly used when a service replacement or rework of the appliance gas inlet is needed
• Helps isolate the appliance gas supply for repair or maintenance

• Turn off the home gas supply and relieve downstream pressure before starting work
• Installation must follow OEM instructions and local codes; use appropriate fittings and sealants for gas service
• Check all connections for leaks with a gas-safe leak detector or soapy-water test after installation

This Holder ORF retainer secures a small appliance component in place to keep moving parts aligned and reduce noise or misfeeds. It's a simple replacement that restores proper component positioning and stable operation. What it does:

• Secures and centers the associated component so it stays in the correct position during use
• Prevents rattling, shifting, or intermittent contact caused by a loose or broken retainer
• Helps restore consistent operation when an associated part is misaligned or falls out of place
• Works as the mounting/holding point designed for the OEM component it matches

• One Holder ORF retainer

• Disconnect power (and water, if appliance type requires) before replacing the part
• Replace using basic hand tools; avoid forcing or prying plastic parts to prevent breakage
• Inspect adjacent clips and fasteners and replace if damaged to ensure a secure fit

This end cap panel is a replacement trim piece that restores the finished edge and protects the appliance cabinet where panels meet. It helps maintain a clean look and keeps edges covered after repair or panel replacement. What it does

• Covers and protects the outer edge of a cabinet or control panel section to prevent exposed edges and wear
• Restores a flush, finished appearance after removing or replacing surrounding panels
• Helps keep dirt and moisture from reaching internal edges and seams
• Matches OEM fit and attachment points for reliable alignment

• One end cap panel

• Designed to snap or screw into existing mounting points — handle gently to avoid cracking plastic
• Turn off and unplug the appliance before removing nearby panels
• Inspect adjacent clips or fasteners and replace if damaged to ensure secure fit
• No special tools typically required; a screwdriver and trim tool may be helpful

This inner oven door liner replaces the damaged or warped inner panel that supports the oven door glass and helps contain heat inside the oven cavity. It restores a solid mounting surface for door glass and internal components. What it does:

• Provides the inner structural panel for the oven door and supports the door glass and insulation.
• Helps maintain proper oven heat containment to support uniform cooking.
• Prevents direct exposure of insulation and internal parts to oven cavity heat and food debris.
• Addresses symptoms like visible cracks, warping, or detached glass mounting points on the inside of the door.

• Disconnect power before starting any repair and follow manufacturer's safety instructions.
• Remove the oven door per the appliance manual to access and replace the inner liner; handle glass and sharp edges carefully.
• Keep all original screws and mounting clips; confirm screw locations during disassembly to ensure proper reassembly.
• If the door has multiple glass panels or seals, verify placement during reassembly—do not force parts into position.

This front mounting bracket secures the appliance's front panel and helps keep the cabinet and components aligned for stable operation. A direct-fit replacement that restores proper panel fit and reduces vibration or rattling. What it does

• Secures the front panel or trim to the cabinet to maintain alignment and prevent gaps.
• Keeps adjacent components from shifting, helping reduce vibration and noise.
• Commonly replaces cracked, bent, or missing brackets that cause loose or misaligned panels.
• Helps restore correct door/panel fit and smooth operation of attached controls or trim.

• One front mounting bracket

• Disconnect power (and water if applicable) before starting any repair.
• Access may require removing the front panel or trim—keep screws and fasteners organized.
• Inspect mating surfaces and existing fasteners; replace any damaged screws or clips.

This mounting bracket secures appliance components to the cabinet or chassis, restoring proper alignment and support. Designed to replace damaged or missing brackets, it helps reduce vibration and prevent parts from shifting during use. What it does

• Provides a stable anchor point for internal components or panels
• Restores proper alignment and fit between the appliance cabinet and mounted parts
• Helps reduce vibration and rattling caused by loose or broken supports
• Commonly replaced when bracket is bent, cracked, or missing

• Inspect adjacent fasteners and mounting holes; replace any stripped screws or damaged hardware
• Use appropriate tools and mounting hardware for secure installation; torque to OEM recommendation if available
• Disconnect power before working on electrical appliances and follow all safety guidelines

This replacement manifold assembly routes fluid or gas from the supply to the appliance's internal components, restoring proper distribution and operation. Use this genuine-style manifold when the original is cracked or otherwise failing. What it does

• Directs flow from the supply line to multiple component ports so burners, valves, or injectors receive proper flow.
• Restores proper operation when improper flow causes uneven performance or loss of function.
• Common symptom indicators: weak or no output at related components, visible leaks, or inconsistent operation.
• Works as the central distribution point that mates to supply and downstream lines or valves.

• One manifold assembly as shown

• Turn off and disconnect the appliance from power and the supply (gas/water/electric) before starting.
• Inspect associated seals, gaskets, and fittings; replace any worn items to ensure a proper seal.
• Hand-tighten fittings first, then torque per manufacturer spec if available; avoid overtightening.