Wfc10soebo Parts

This is a replacement mounting screw used to secure appliance panels and components. It restores proper fastening so panels and parts stay aligned and stable during normal use. What it does:

• Fastens appliance panels, trim or internal components in place
• Replaces missing or stripped screws that cause rattling or loose parts
• Helps stop panel vibration and maintain proper component alignment
• Matches OEM fit where specified for a secure installation

• One replacement mounting screw

• Verify screw size and fit before installation; use the correct screw location from your parts diagram
• Turn off and disconnect power to the appliance before accessing internal components
• Hand-start the screw to avoid cross-threading; tighten until snug—do not over-tighten
• Wear safety glasses and follow manufacturer service instructions when applicable

This replacement screw restores secure fastening for appliance panels and components, helping stop loose parts and rattling so controls and panels stay aligned. Use when original screws are missing, stripped, or damaged. What it does:

• Secures panels, trim, control boards, brackets, or components to the appliance frame
• Stops rattling, vibration noise, and loose or misaligned parts caused by missing or damaged fasteners
• Replaces stripped, corroded, or missing screws to restore proper fit and function
• Matches OEM fit and threading for straightforward hardware replacement when the correct screw is identified

• Turn off power and unplug the appliance before accessing internal components
• Use the correct screwdriver or bit to avoid stripping the head; do not force mismatched drivers
• Tighten until snug—do not overtighten, which can strip threads or crack plastic
• Keep removed hardware organized and verify the replacement screw matches the original before installation

Color: Black   Note: Left side endcap

Color: Black   Note: Right side endcap

This wire harness routes power and signals between an appliance's control and its components, restoring reliable electrical connections for proper operation. It replaces a damaged or worn wiring assembly to help resolve component power failures. What it does:

• Provides the factory routing and connectors for power and signal circuits between controls and components
• Replaces frayed, cut, or corroded wiring that can cause intermittent operation or loss of function
• Helps restore power to controls, motors, valves, or sensors when a wiring fault is the cause
• Matches OEM connector types to ensure proper fit and connection

• Disconnect all power before inspecting or replacing the harness to avoid shock or damage
• Compare connector shapes and pin counts to ensure correct orientation before installation
• Route and secure the harness per OEM routing to prevent chafing or contact with hot/moving parts
• If terminals are damaged or connectors don't seat properly, replace the harness rather than attempting field repairs

The Electronic Control Board is an OEM part for Whirlpool ranges. It is the central processing unit that manages all electrical operations within the oven cavity such as bake/broil heating elements, fans, lights, and temperature sensors.

Causes of a bad control board can include water damage, failure due to years of heavy usage, or exposure to excessive temperatures that degrade electronic components over time. 

Symptoms of a bad control board include:

• Inability to select or maintain temperature settings
• Element or fan failure despite replacing other parts
• Erratic heating behavior or premature shutdowns
• Failure of digital displays or inability to program oven functions

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Surface Element is an OEM component specifically designed for Whirlpool ranges and cooktops. It provides the heating source for cookware on the stove surface.

Causes of a bad element include deterioration of insulation material over time, carbonization or damage from pans slammed onto the element, or contact with moisture. 

Symptoms of a bad element include:

• Inability to heat cookware sufficiently 
• Uneven or incomplete heating of pans placed above
• Burn marks or discoloration visible on the element
• Crackling or popping noises heard from below pans

This part is also compatible with some Kenmore, Frigidaire, and select GE range models. Proper cooking performance and safety are maintained with an OEM surface element replacement when needed.

The INSULATION is an OEM component specifically designed for Whirlpool electric ranges. Positioned between inner and outer wall cavities, it efficiently buffers heat.

Fiberglass batting material keeps internal temperatures elevated for cooking while preventing harmful temperatures from spreading outside. Stable temperature control is essential for consistent results.   

Causes of damaged insulation could be high heat exposure over time weakening fibers, moisture ingress deteriorating integrity, or physical punctures allowing heat leakage.

Symptoms of insufficient insulation include: 

• Oven unable to effectively retain or distribute set temperatures
• Door and exterior surfaces becoming too warm to safely touch 
• Higher energy bills from frequent recovery heating cycles

This Whirlpool insulation is also compatible with electric ranges by GE, Frigidaire, Samsung, and some LG kitchen models.

The Coil Surface Element is a 6-inch OEM part for Whirlpool ranges. It is responsible for radiating heat from its coils to cook food positioned above the stovetop grates. 

Symptoms of a faulty coil surface element include:

• Slow or uneven heating of pots and pans  
• Hot and cold spots on cooking surfaces
• Element coils glowing dimly or not at all
• Buzzing or crackling noises coming from below cookware

Causes can be mineral deposits coating the coils over time, physical damage like bending or breaks, or standard wear of heating filaments inside. 

This genuine OEM Whirlpool part is also compatible with the electric ranges of Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, and Kenmore brands.

This door hinge supports and pivots the appliance door so it opens smoothly and closes securely. Replacing a worn hinge restores proper alignment and sealing to help the door latch correctly and operate as designed.

• Provides the pivot point and maintains door alignment
• Helps ensure smooth opening/closing and proper latching
• Supports a tight seal to prevent gaps, rattles, or temperature/moisture loss
• Typical failure signs: door sags, binds, squeaks, or won't stay closed/aligned

• Disconnect power before service; wear gloves to protect from sharp edges
• Support the door and control any spring tension; remove mounting hardware and the old hinge
• Install the new hinge in the same orientation; transfer any reusable hardware
• Adjust as needed

The Range Surface Element Wire Harness is an OEM part for Whirlpool ranges and cooktops. This harness routes power between the switches and surface heating elements.

Causes include continuous exposure to cooking heat, mechanical stress from opening/closing element covers, and standard wear over time.

Symptoms of a malfunctioning wire harness include:

• Inaccurate or inconsistent element temperature readings
• Elements failing to turn on or heating unevenly
• Error codes related to element malfunctions

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Glass is an OEM part for Whirlpool ranges. It forms the inner layer of the oven door, providing insulation and protection against high temperatures during cooking. The oven door inner glass ensures heat is contained within the oven cavity, allowing for efficient and even cooking. It also acts as a barrier, preventing any spills or debris from entering the space between the inner and outer glass layers.

A bad oven door inner glass can occur due to accidental impact, extreme temperature changes, or regular wear and tear. If you notice symptoms such as cracks, shattered glass, or compromised insulation, it may be time to replace this part.

Symptoms of a bad oven door inner glass include:

• Cracks or shattered glass
• Compromised insulation
• Difficulty in maintaining consistent cooking temperatures

Restore your Whirlpool range by replacing the damaged or worn oven door inner glass with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Range Control Board is an OEM replacement part for Whirlpool electric wall ovens. It regulates all cooking functions through electronic interaction with temperature sensors, timers, and user interface buttons. 

Symptoms of a failing control board involve:

• Inoperable or unresponsive oven controls    
• Burner or bake element malfunctions
• Fault codes or error messages on displays
• Inability to accurately manage heat settings

Causes stem from continuous exposure to baking heat cycles and normal wear over many years of use. Integrated circuits and delicate electronic pathways can degrade within the control system.

This authentic Whirlpool replacement is compatible with some Jenn-Air, KitchenAid, and Maytag electric wall oven models as well.

Door handle provides a secure grip for opening and closing the appliance door, restoring easy access and everyday use. A straightforward replacement to swap in when the original handle is cracked, loose, or broken. What it does:

• Restores a solid handhold so the door opens and closes reliably.
• Replaces cracked, broken or detached handles that make the door difficult or unsafe to use.
• Prevents accidental slips and helps maintain normal door operation.
• Matches the original mounting method to secure properly to the door.

• One door handle

• Disconnect power or unplug the appliance before beginning any service.
• Support the door while removing and installing the handle to avoid dropping or misaligning the door.
• Basic hand tools (screwdrivers, socket) are typically required; keep fasteners and trim organized.
• Do not overtighten screws — snug is sufficient.

This surface heating element replaces a damaged top burner so your range can heat cookware properly. It reconnects the cooktop's electric heating circuit to restore normal cooking performance and reliable heat. What it does:

• Heats cookware on the cooktop's top burner for boiling, frying and simmering
• Replaces cracked, burned-through or non-heating surface element units
• Commonly used when a burner won't heat, heats intermittently, or shows visible damage
• Matches the OEM element design and mounts at the cooktop surface using existing terminals

• Disconnect power to the range at the breaker before inspecting or replacing the element
• Allow the cooktop and element to cool fully; handle terminals by the insulated ends
• Remove and note connector positions before disconnecting wires to ensure correct reassembly