Wfe5105 Parts

Keep your appliance performing and looking its best with this factory-authorized cleaner. It's formulated to dissolve built-up residues and deposits when used as directed, helping reduce odors and keep maintenance on track.

• Breaks down mineral scale, film, and other deposits that accumulate with normal use
• Helps address issues like lingering odors or visible buildup
• Supports ongoing performance and appearance when used per maintenance guidelines
• Use only as directed on the product label and in your owner's manual

• Read and follow all label directions and your appliance owner's manual before use
• Disconnect power and shut off water if required for your model's cleaning procedure
• Use in a well-ventilated area; wear gloves/eye protection as recommended
• Do not mix with bleach or other chemicals; rinse/flush as instructed before returning to service

Color: Biscuit.

Color: Grey

This is the control panel for use on ranges. The purpose of this part is to house the selection buttons and display of the range. It's stainless steel in color and is a high-quality, durable replacement part. A good sign that the control panel has gone bad is if the buttons are not working when they are pressed. Diagnostic codes, or fault codes, will be shown on the display for some issues. Additional signs include if the oven will not turn on or off or if there is a temperature control problem. Unplug the range from the outlet before replacing this part. Wear work gloves for safety.As a genuine OEM part, this is a high-quality replacement part that comes directly from the manufacturer. It is sold individually. This control panel is compatible with ranges that are manufactured by the Whirlpool brand.

This 10-32 terminal block nut fastens wire lugs to the appliance's terminal studs. Replacing a missing, stripped, or corroded nut restores a tight, reliable connection and helps prevent heat damage or intermittent power at the connection.

• Secures wire lugs to a 10-32 terminal stud for a solid electrical connection
• Restores proper clamping force when the original nut is stripped, corroded, or missing
• Helps address loose/burned terminal connections, heat discoloration, or intermittent power at the block
• Suitable for terminal block and similar 10-32 stud applications on compatible appliances

• Disconnect power at the breaker or unplug the appliance before servicing
• Inspect the terminal block, studs, and wiring for heat damage; replace any damaged components
• Clean threads and start the nut by hand to avoid cross-threading; tighten firmly without overtightening
• If the stud turns while tightening, hold it with an appropriate tool to protect the block

Razor blade scraper.

This door-activated switch detects when the oven door opens or closes and signals the appliance to control the interior light. Replacing a worn or failed switch restores dependable light operation and accurate door-status feedback.

• Senses oven door position and opens/closes the light circuit
• Controls the oven's interior light based on door position
• Provides door-status input to the control for normal operation
• Typical symptoms: light stays on, won't turn on, or flickers with door movement; door-ajar messages may appear

• Disconnect power at the breaker or unplug the unit before servicing
• Access the switch from behind the front frame or control area, depending on model
• Move wires to the new switch one at a time to maintain correct positions; secure with existing hardware
• Restore power and verify light operation with door open/closed before reassembly

This replacement terminal block cover encloses the appliance's incoming power connections. It protects the wire terminals from accidental contact and debris, restoring a safe, finished connection area when the original cover is damaged or missing. What it does:

• Covers and shields the power terminal block where the supply wires connect
• Helps prevent accidental contact with live electrical connections
• Helps keep dust and debris out of the connection area
• Common signs: missing or broken cover, cover won't stay attached, visible heat damage or discoloration on the original cover

• One terminal block cover

• Disconnect power at the breaker or unplug the appliance before servicing
• Access the terminal block per your model's service information
• Reuse existing mounting hardware; position and secure the new cover without pinching wires
• Inspect wires/terminals for heat damage or looseness and correct before reassembly

The Oven Door Handle is an OEM part for Whirlpool wall ovens. This handle allows for easy, safe opening and closing of the oven door during use. 

Causes of a bad door handle can include wear and tear from repetitive use over time, damage from improper cleaning methods, or cracks/breaks from accidental impact.

Symptoms of a bad oven door handle include:

• Loose, wobbly, or unstable door grip 
• Cracks or splits in the handle material
• Handle completely detached from door

This replacement handle is also compatible with select Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore wall oven models.

This support bracket secures an appliance cabinet component or mounting point to restore alignment and reduce movement. It replaces worn or broken supports so panels and internal parts stay properly positioned during normal operation. What it does

• Holds a cabinet panel, frame, or internal component in place to maintain proper alignment.
• Stabilizes mounting points to help reduce vibration, rubbing, or intermittent noise.
• Common replacement when you notice a loose or sagging panel, rattling, or unusual chassis movement.
• Provides a direct mechanical fix—matches the OEM bracket design and fit.

• Disconnect power (and shut off gas supply for gas appliances) before starting any repair.
• Remove necessary panels and fasteners to access the old bracket; keep track of all screws and clips.
• Compare the new bracket to the old part for orientation before installing; secure using the original fasteners—do not overtighten.

This frame surrounds and supports the window glass in your oven door, keeping the glass secure and aligned. Replace a bent or corroded frame to address loose glass and restore the door's proper fit and clean appearance.

• Secures the oven door window glass within the door assembly
• Helps maintain alignment and seal around the window area
• Replaces frames that are bent, cracked, or corroded
• Addresses loose, rattling, or misaligned door glass
• Restores the finished look of the door

• Disconnect power and allow the oven to cool completely before service
• Remove the door per your model's instructions and place it on a padded surface
• Handle glass with cut-resistant gloves; keep track of screws, clips, and insulation for transfer
• Seat the glass evenly and avoid overtightening fasteners during reassembly

The Knob is an OEM component specifically designed for Whirlpool ranges. This knob attaches directly to the electronic control panel, allowing for easy adjustment of temperature settings during the cooking process. 

Causes of a bad knob can include cracks or breaks in the plastic material, worn lettering making the knob difficult to read, or malfunctions in the electronically-controlled interface. 

Symptoms of a bad knob include: 

• Difficulty turning the knob 
• Inaccurate temperature display 
• Unresponsive or inconsistent adjustments
• Loose or detached fit on the control panel

This OEM Whirlpool replacement part is designed to directly replace the original equipment knob, restoring a seamless fit and functionality. It is also compatible with the models of Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore.

This vent trim is the finishing piece that frames the vent opening and directs airflow. Replace a cracked, warped, or missing trim to restore a secure fit and a clean, factory look at the vent area.

• Covers and finishes the vent opening for a clean appearance
• Helps guide exhaust air/steam away from the cabinet as designed
• Replaces broken tabs, cracks, discoloration, or a missing trim piece
• Can reduce rattling or vibration from a loose or damaged vent surround

• Disconnect power before servicing
• Access the vent area and remove screws or clips securing the old trim
• Reuse existing mounting hardware; align and tighten evenly without overtightening
• Handle carefully to avoid scratching or cracking the new trim

Mounting bracket that secures a drawer to its cabinet or glide assembly, restoring stability and alignment for smooth opening and closing. Replaces damaged or missing brackets that cause sagging, misalignment, or detachment. What it does:

• Secures the drawer to the cabinet or slide hardware so the drawer stays aligned and supported.
• Restores smooth opening and closing when a worn or broken bracket causes binding or uneven travel.
• Prevents the drawer from sagging, pulling out, or detaching from the glide.
• Use when bracket is cracked, bent, or missing to regain proper drawer function.

• Disconnect power to the appliance or unplug it before beginning work.
• Basic hand tools are typically required; keep original fasteners for reuse if they are undamaged.
• Remove the drawer and inspect the glide/rail for damage before installing; reinstall drawer and verify smooth operation.

This griddle creates a flat, continuous cooking surface that rests on your range or cooktop grates. It adds versatile space for items like pancakes and sandwiches, and replaces a worn or missing original griddle to restore safe use. What it does:

• Provides a broad, flat surface across burners for griddle-style cooking
• Direct replacement for a damaged, warped, or missing griddle
• Useful for foods that need a continuous surface (pancakes, eggs, grilled sandwiches)
• Common reasons to replace: wobbling/poor fit on grates, cracks, or persistent sticking from wear

• 1 griddle

• Turn all burners off and let the cooktop cool before placing or removing the griddle
• Position per your model's instructions so it sits flat and secure on the grates
• Preheat gradually on low to medium heat; handle only with oven mitts
• Allow the griddle to cool completely before cleaning or moving

Color: White. Size: 2 oz. can. Porcelain touch-up paint.