Wfg320mbs3 Parts

The Burner-Head is an OEM part for Whirlpool ranges. It is the surface component that distributes heat across gas or electric stove top burners to cook food. Each burner head is designed and fitted to match the size, shape, and power output of its respective burner.

Causes of a bad burner head can include warping or distortion from high heat that affects burner performance, worn enamel coatings, or damaged grates or supports.  

Symptoms of a bad burner head include:

• Uneven or inefficient heating from the burner surface
• Discoloration, cracks, or chips in enamel coatings
• Loose or rocking burner grates
• Burner flames not lighting or adjusting correctly

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore ranges and cooktops.

Color: White. Size: 2 oz. can. Porcelain touch-up paint.

The Glass Bracket is an OEM replacement part for Whirlpool range ovens. It is designed to securely hold the inner glass panel in place, ensuring proper insulation and visibility while cooking. It helps to maintain the integrity of the oven door and prevents any potential hazards or heat loss.

A bad oven door inner glass bracket can occur due to wear and tear, accidental damage, or improper installation. If you notice symptoms such as a loose or misaligned inner glass panel, rattling sounds when opening or closing the oven door, or difficulty in maintaining the desired temperature inside the oven, it may be time to replace the bracket.

Symptoms of a bad oven door inner glass bracket include:

• Loose or misaligned inner glass panel
• Rattling sounds when opening or closing the oven door
• Difficulty in maintaining the desired temperature inside the oven

Repair your range oven by replacing the faulty or damaged oven door inner glass bracket with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Color: Black. Size: 12 oz. Acrylic appliance aerosol can spray paint.

This door hinge supports and pivots the appliance door for smooth opening and a secure, even close. Replacing a worn hinge restores proper alignment and sealing to help prevent gaps and ensure reliable operation. What it does:

• Provides the pivot point and structural support for the door
• Maintains alignment and closing tension for a flush, even seal
• Helps ensure correct latch or switch engagement
• Common symptoms of a failing hinge: door sagging, not closing fully, uneven gaps, squeaking/grinding, or the door popping open

• Door hinge

• Disconnect power to the appliance before servicing
• Support the door while removing and installing the hinge to prevent damage
• Transfer and reuse original mounting hardware as needed
• After installation, check door alignment and closure; adjust per the service instructions

Replacement screw used to secure components and panels in household appliances, restoring proper fit and effectively reducing movement or rattling from loose or missing fasteners. What it does:

• Secures panels, trim and internal components to keep parts aligned and stable.
• Helps stop rattling, vibration or noise caused by loose or missing fasteners.
• Restores proper mounting for brackets, covers and control housings.
• Useful wherever a worn or stripped screw is causing play or loose parts.

• Disconnect power and unplug the appliance before doing any work.
• Use the correct driver and size to avoid stripping the head or threads.
• Tighten snugly but avoid overtightening—replace with the exact OEM screw when specified.

This gas tubing is the preformed line that carries fuel from the appliance's gas valve/manifold to a burner. Replacing a damaged or kinked tube restores safe, consistent gas flow for reliable ignition and even heating. What it does:

• Routes gas from the valve or manifold to a specific burner
• Maintains proper fuel delivery to support steady flame and correct burner performance
• Common signs it's needed: weak or uneven flame, no ignition on that burner, visible kinks/damage, hissing or gas odor (do not operate if a leak is suspected)
• Direct, shaped replacement to restore original gas routing

• 1 gas tube

• Shut off gas supply and disconnect power before servicing; ventilate the area
• Match the original routing and orientation; avoid bending or kinking the new tube
• Use two wrenches on flare/compression fittings to avoid stressing components
• After reassembly, check all connections with an approved leak-detection solution—never with an open flame

This sheet-metal pan-head screw secures appliance panels, brackets, and components to the cabinet or frame. Replacing a missing or damaged screw restores a tight fit and helps stop rattles, misalignment, and loosening.

• Fastens sheet-metal panels, covers, ducts, and brackets to the appliance chassis
• Helps keep components aligned and secure during operation
• Replace if the original is missing, rusted, stripped, or damaged
• Common symptoms: loose or vibrating panels, gaps or misaligned parts, hardware that won't tighten

• Disconnect power; shut off gas or water supply before servicing
• Support the panel or part being attached; hand-start threads to avoid cross-threading
• Use the correct driver bit; tighten snugly but do not overtighten into sheet metal
• If multiple matching screws secure a part, consider replacing them as a set for consistent hold

Color: White. For black order WP98008545. For biscuit order 98008169.

This is a replacement screw used to secure panels, trim, or small components on compatible Whirlpool appliances. Installing the correct fastener restores proper fit and helps stop rattles or loose trim. What it does:

• Secures trim, panels, or control components to prevent movement and rattling
• Replaces missing or damaged hardware that can cause gaps or loose parts
• Helps maintain proper alignment of panels and movement-free operation
• Used wherever a factory screw of this size and head style is specified

• Always disconnect power (and water, if applicable) before servicing the appliance
• Use the correct screwdriver or driver bit to avoid stripping the head
• Install by hand until threads engage, then tighten snugly—do not overtighten
• Keep removed hardware organized before final reassembly

Screws for range anti tip bracket: WP3801F656-51. Includes 2 screws.

The Oven Liner Touch Up Paint is an OEM part for Whirlpool ovens. This 2 oz warm white touch-up paint is designed to cover minor scratches, chips, and blemishes on the oven liner, restoring its appearance and protecting it from further damage. 

Causes of a bad oven liner include exposure to high temperatures, accidental impacts, and abrasive cleaning materials, which can lead to scratches, chips, and discoloration. Over time, these imperfections can worsen, making it necessary to use touch-up paint to maintain the oven liner’s integrity.

Symptoms of a bad oven liner include:

• Visible scratches or chips on the oven interior
• Discoloration or fading of the liner
• Increased difficulty in cleaning the oven liner
• Potential rust or corrosion in affected areas

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: White

This replacement door handle restores a secure, easy-to-grip handle for your appliance door so you can open and close it safely and reliably. It matches the OEM shape and mounting points for a proper fit. What it does:

• Provides a comfortable grip for opening and closing the appliance door
• Replaces cracked, loose, or broken handles that are difficult or unsafe to use
• Restores original alignment so door latches and seals operate correctly
• Fits the original mounting points to prevent wobble or play

• One replacement door handle

• Disconnect power (and water supply for washers/dishwashers) before beginning work
• Handle typically attaches with screws or hidden clips; access may require removing an inner door panel
• Use basic hand tools; avoid overtightening fasteners to prevent damage

The Clip is an OEM component specifically designed for Whirlpool ranges. This clip plays a role in securely holding and mounting components within the appliance. 

The clip is designed to securely grip parts in place, preventing unwanted movement or dislodging that could impact the operation or result in damage. It allows for components to be effortlessly installed while remaining firmly affixed. 

Causes of a bad clip can include wear and tear over time, damage due to excessive force or impact, or deterioration from heat exposure. 

Symptoms of a bad clip include: 

• Loose or detached components inside the appliance 
• Increased vibration or unwanted noise during operation
• Components that are not sitting securely or properly installed
• Difficulty accessing or removing parts that rely on the clip 

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This gas valve controls the flow of natural or LP gas to the oven/burner assembly to enable safe ignition and stable flames. Replacing a faulty valve restores reliable gas flow for normal cooking operation. What it does:

• Regulates gas flow to the oven/burner assembly so burners ignite and maintain flame
• Common replacement when burners or oven won't light, flame won't hold, or oven doesn't reach temperature
• Works with appliance gas supply lines and ignition systems to provide controlled fuel delivery
• Matches OEM form and connection points for direct replacement

• One gas valve

• Turn off gas supply and electrical power before attempting service
• Inspect fittings and seals; use proper gas-rated thread sealant where required
• After installation, check all connections for leaks with a gas leak detector or soapy water