Wfg320mobw2 Parts

Mounting screw for securing trim, hinges, drawer guides, and interior components. Replace if missing, stripped, or broken during repair or maintenance.

This factory screw secures appliance components to their mounting points. Replace missing, worn, or stripped hardware to restore a tight fit, proper alignment, and quieter operation across the affected assembly.

• Fastens panels, brackets, covers, or internal parts to the chassis or frame
• Helps maintain alignment and support, reducing rattle, vibration, or looseness
• Replaces missing or damaged screws that have backed out, broken, or stripped
• Restores secure mounting after service when original hardware is lost

• Disconnect power; shut off water or gas supplies before servicing
• Use the correct driver; start threads by hand to avoid cross-threading
• Match length and thread to the original location; do not substitute with longer hardware
• Tighten snugly; do not overtighten into plastic or thin metal

Controls gas flow to burners and oven by stabilizing manifold pressure. Replace if cracked, damaged, or leaking to restore proper gas regulation.

Surface burner and electrode assembly for gas ranges and cooktops. Replace when burner is cracked, electrode is broken, or ignition spark is inconsistent.

Replace a worn, broken, or missing gas range surface burner control knob. Installs on bladed shaft valves to restore smooth flame adjustment and control.

Seals window glass to door frame, preventing rattles and heat loss. Replace if cracked, torn, or no longer cushioning properly. Verify fit by model.

Replace a cracked, heat-damaged, or loose light socket to restore safe illumination. Secures the bulb and connects to appliance wiring. Confirm fit.

Replacement oven bottom panel that forms the floor of your gas range oven cavity. Needed when original is warped, rusted, cracked, or peeling.

Replacement surface burner base for gas ranges. Houses the gas outlet and supports the burner cap. Order when your original is cracked or damaged.

Securely holds the gas orifice in place for proper gas flow to range burners. Replace if worn, damaged from impact, or loose to restore stable burner operation.

Replacement mounting screw for dishwashers and ranges. Secures panels, brackets, and internal components when original hardware is stripped, missing, or corroded.

This wire harness is the factory wiring assembly that links electrical components within the appliance using the correct, keyed connectors. Replacing a damaged harness restores solid connections and can resolve intermittent operation, no-start, or component-not-running issues.

• Routes power and control signals between key components
• Correct, keyed connectors help ensure proper, secure fit
• Replaces cut, heat-damaged, or brittle wiring and terminals
• Helps with: won't start, intermittent operation, components not energizing, visible burned/melted connectors

• Disconnect power to the appliance before servicing.
• Photograph and/or label original routing and connections for reference.
• Match each keyed connector; do not force. Route wiring as originally secured, away from sharp, hot, or moving parts.
• Inspect mating terminals for heat damage or corrosion and correct any issues before reassembly.

Secures the gas orifice and aligns it with the burner assembly on your gas range. Replace if cracked, damaged, or missing to restore proper gas flow path.

Precision-machined orifice spud that meters natural gas to a range or cooktop burner. The #9 size restores correct fuel flow and flame characteristics when replacing a clogged or damaged orifice or when installing the model's specified natural-gas orifice.

• Regulates gas flow to the burner for proper flame size with natural gas
• Replaces a worn, blocked, or stripped orifice to improve flame quality
• Used during fuel conversion when the model calls for a #9 NG orifice
• Helps with symptoms: small/weak flame, uneven flame pattern, or a burner that won't stay lit

• Disconnect power and shut off the gas supply; allow the appliance to cool
• Hand-start threads, then snug gently—do not overtighten; keep the orifice and holder free of debris
• Restore gas, check all connections for leaks with a soapy-water solution, and verify proper flame

This natural-gas burner orifice spud meters the correct fuel flow for a 15,000-BTU surface burner. Replacing a clogged, damaged, or wrong-size orifice restores proper flame size, cleaner combustion, and reliable cooktop performance. What it does:

• Meters gas through a calibrated opening to the burner head for correct flame height
• Sized for a 15,000-BTU surface burner using natural gas
• Installs in the orifice holder/valve body beneath the burner
• Typical symptoms of a faulty or mismatched orifice: weak/small flames, yellow/sooty flames, uneven heating, delayed ignition, burner won't reach high heat

• 1 natural-gas 15,000-BTU orifice spud

• Shut off gas supply and disconnect power; allow all burners to cool completely
• Remove grates, caps, and burner heads; lift the top or access the orifice holder as required
• Match each orifice to the correct burner location by BTU rating; do not overtighten
• After reassembly, check all connections for leaks with a non-corrosive soap solution and verify proper flame color/size

• For natural gas applications only; use the correct LP/propane orifice when converting fuel types

Fix weak flames or burners that won't ignite by replacing a faulty surface burner valve. This gas valve restores precise flame control on your range.