Wfmc1001uc-2 Parts

Spring tank secures and positions an appliance tension spring to maintain proper movement and balance for a door or other moving assembly. Replacing a worn or broken tank restores correct spring alignment and smoother, more reliable operation. What it does:

• Holds the end of the tension spring and keeps it aligned in the assembly.
• Maintains correct spring tension so doors or panels open, close and remain balanced.
• Prevents spring detachment that can cause sudden drops, misalignment or noisy operation.
• Common symptoms of a failing tank: door drops or won't stay open, uneven closing, rattling or banging during movement.

• Disconnect power to the appliance before starting any repair to avoid electrical hazards.
• Support the door or moving panel while replacing the tank to prevent sudden movement or injury.
• Use the OEM part orientation and hardware; inspect the spring and mounting points for wear and replace if scored or damaged.
• Test the door/panel operation several times after installation to ensure correct tension and secure mounting.

This rear drum motor mounting bushing supports the motor shaft at the back of the tub, keeping the drum aligned and reducing wear. It restores smooth drum rotation and helps reduce noise and vibration when functioning properly. What it does:

• Centers and supports the motor shaft to maintain proper drum alignment.
• Cushions rotating components to reduce squealing, grinding, or scraping noises.
• Helps prevent excess drum wobble and uneven wear on the tub and bearings.
• Can stop intermittent rubbing or burning smells caused by a worn mounting surface.

• Disconnect power before starting and follow all safety precautions; service panels may have sharp edges.
• Access typically requires removing the dryer/heater assembly and drum.
• Inspect mating surfaces and surrounding components (shaft, bearing, seal). Replace any excessively worn parts to prevent repeat failures.
• Use only OEM-recommended parts and fasteners; do not force or press the part in without proper alignment.

This replacement hose connects the dishwasher drain/sump to the drain system, restoring proper water removal and preventing leaks or standing water. It's a direct-fit service part when the original hose is cracked or clogged. What it does

• Carries waste water from the dishwasher sump to the household drain or disposal
• Restores proper draining when a split, collapsed, or clogged hose causes standing water
• Helps stop leaks and puddling that can occur from worn or damaged hose sections
• Maintains correct flow to prevent dishwasher error codes related to drainage

• Turn off power and water supply to the appliance before starting any repair
• Inspect hose routing and clamps; replace any damaged clamps or retainers for a secure seal
• Ensure hose connections are tight and routed without kinks to allow proper drainage

This replacement hose-pressure chamber routes water to the dishwasher's pressure chamber so the machine can sense and control water level. Restores proper pressure sensing to help prevent overfilling and fill errors. What it does

• Connects the sump/water path to the pressure chamber so the water-level sensor can detect fill height.
• Replaces cracked, pinched, or collapsed hose that can cause inaccurate water-level readings.
• Commonly used when dishwasher shows overfill, won't fill correctly, or reports water-level or pressure-related errors.
• Flexible vinyl tubing designed for routing in tight spaces without kinking.

• Disconnect power and shut off the water supply before starting any repair.
• Inspect nearby fittings and the pressure chamber for wear; replace clamps if damaged.
• Push-fit or clamp the hose securely to both ports; ensure there are no kinks or sharp bends.

This hose inlet is the molded connection that routes incoming water into the appliance and provides a sealed mating point for the fill hose. It restores proper water flow and helps prevent leaks at the hose connection. What it does

• Directs incoming water from the fill hose into the appliance's water system.
• Provides a sealed connection to prevent drips or leaks at the hose attachment.
• Can cause no-fill or slow-fill symptoms when cracked, clogged, or loose.
• Works with the inlet hose and nearby fittings to maintain correct water supply.

• Turn off power to the appliance and shut off the water supply before starting.
• Inspect and replace any damaged gaskets or clamps when installing this part.
• Hand-tighten fittings, then snug with appropriate tools; avoid overtightening plastic fittings.
• After installation, restore water and power, run a short cycle, and check all connections for leaks.

This T-shaped water hose connector routes incoming water to separate internal hose lines, restoring proper water distribution inside the appliance. It replaces a worn or cracked hose tee to stop leaks and restore flow to internal components. What it does:

• Joins three water lines so water can be directed to multiple internal points
• Stops leaks caused by cracked or damaged tee fittings at hose junctions
• Restores reliable water flow to downstream parts that depend on the split connection
• Prevents hoses from separating at a failing junction

• Turn off and disconnect the appliance from the water supply before servicing
• Inspect hose ends and clamps; replace clamps or seals if worn
• Push hoses fully onto each barb and secure with appropriate clamps
• After installation, restore water and check all connections for leaks