Wfvc4400uc Parts

Replacement tank spring that restores proper tub suspension and alignment to reduce noise and vibration during cycles. Helps stabilize the dishwasher tub for quieter operation and more consistent wash performance. What it does:

• Supports the dishwasher tub/tank assembly to maintain correct position and reduce rattling or excessive movement.
• Restores tension lost from worn or stretched springs that can cause knocking or vibration during operation.
• Helps prevent misalignment that affect spray performance or cause intermittent door/tub contact.
• Used when you notice unusual noises, excessive vibration, or a loose-feeling tub.

• Disconnect power and water supply before servicing; work with dry hands and proper lighting.
• Access may require removing the lower kick panel or toe-kick and supporting the tub while replacing the spring.
• Handle spring tension carefully — use appropriate pliers or tools and avoid finger placement near the spring path.

A small replacement screw used to secure panels, brackets, and other appliance components. Restores proper fastening to reduce rattling and prevent parts from becoming loose or detached during operation. What it does:

• Fastens panels, trim, brackets or assemblies in place to maintain structural fit
• Replaces missing, stripped, or corroded screws that cause rattling or loose parts
• Helps restore normal operation by keeping components aligned and secure
• Works wherever the OEM screw specification and thread fit this mounting point

• Disconnect power (and water, if applicable) before servicing the appliance
• Use the correct screwdriver and size to avoid stripping the head
• Tighten snugly but avoid overtightening, which can strip threads or crack plastic
• Verify threads and length match the original part before final installation

This hose inlet connects the household water line to the appliance's fill system, restoring proper water delivery for normal cycles. It's a direct replacement for damaged, cracked, or leaking inlet hose assemblies. What it does

• Channels incoming water from the supply into the appliance's fill system.
• Prevents leaks at the supply connection when intact and properly installed.
• Commonly replaces hoses that are cracked, split, or worn and causing visible leaks.
• Can resolve issues with poor or no water fill when the hose is blocked or damaged.

• Disconnect power and shut off the water supply before starting.
• Inspect and replace any worn O-rings, ferrules, or clamps as needed.
• Hand-tighten fittings, then secure with recommended clamps; avoid overtightening.

This dispenser top cover replaces the plastic lid that protects and conceals the dishwasher detergent dispenser, restoring proper appearance and function. It helps keep the dispenser mechanism clear and reduces detergent exposure. What it does:

• Replaces a cracked, warped or visibly damaged dispenser lid that won't close properly
• Protects the detergent compartment from moisture and debris during cycles
• Helps ensure the dispenser cover seals and opens as intended during wash cycles
• Visible cosmetic repair for chipped or faded dispenser trim

• Disconnect power and water to the appliance before beginning any repair
• Keep fasteners and clips organized during reassembly; do not overtighten plastic screws

This front drum motor mounting bushing supports the dryer drum shaft and helps the drum spin smoothly for quiet, even drying. It replaces a worn bearing surface to reduce noise and prevent drum misalignment. What it does:

• Provides a low-friction bearing surface for the drum shaft at the front motor mount
• Helps keep the drum properly aligned during rotation
• Reduces squealing, grinding, or rubbing noises caused by a worn front bushing
• Prevents excess wear on the drum shaft and adjacent components when functioning correctly

• One front drum motor mounting bushing

• Disconnect power before beginning any repair and follow all safety precautions
• Inspect the drum shaft, drum seal, and rear bushing for wear and replace as needed
• Use appropriate tools to remove the old bushing and press or seat the new bushing evenly
• Re-check installation and related components if alignment or noise persists after replacement

Includes(1)Shipping Bolt,(1)washer,(1)sleeve

The Shipping Bolt is an OEM part for Bosch washing machines. This bolt is designed to secure the washer drum assembly during shipping to prevent excessive movement and potential damage.

Causes of a bad shipping bolt can include stripping, damage to the threads, or loss of the bolt entirely during shipment or installation.

Symptoms of a damaged or missing shipping bolt include:

• Excessive shaking or rattling noises from inside the washer drum
• The drum not rotating properly during wash cycles
• Reduced washing efficiency and improper washing performance

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Hose Clamp is an OEM part for Bosch washers. This clamp secures connecting hoses to direct water flow where needed.

Causes of a bad hose clamp can be wear and tear over time, accidental damage from maintenance or repairs, or degradation of the clamp material from chemical exposure.

Symptoms of a bad hose clamp include:

• Leaks around hose connections
• Loose or detached hoses
• Disrupted water flow impacting cleaning performance

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

2 included - Front load

This hose inlet is the dishwasher water-connection fitting that routes incoming water into the appliance. It provides a secure connection to help prevent leaks and ensure consistent water supply for normal wash cycles. What it does:

• Connects the household water supply to the dishwasher's internal water system
• Seals the inlet to help prevent drips or leaks at the connection point
• Ensures the appliance receives steady water flow for proper filling and operation
• Be replaced when the inlet is cracked, corroded, or leaking

• Disconnect power and shut off the water supply before starting any work
• Inspect and replace any worn O-rings or gaskets when installing the new inlet
• Hand-tighten fittings and then check for leaks; retorque per OEM guidance if available

This is a factory-style screw used to secure appliance panels and components for a reliable, low-profile hold. It replaces worn or missing fasteners to stop rattling and keep parts aligned during normal use. What it does:

• Secures trim, panels, brackets or small components in place
• Stops loose parts that can cause rattling or vibration noises
• Restores correct fit where a missing or damaged screw allows gaps
• Works as a direct replacement when the original fastener is lost or stripped

• One screw

• Disconnect power and water before servicing the appliance
• Start the screw by hand to avoid cross-threading; use the correct driver bit
• Tighten snugly but avoid over-torquing to prevent stripping or part damage
• Keep removed hardware organized to ensure correct reassembly

This interference capacitor reduces electrical noise and helps protect the appliance's control circuitry from voltage spikes. It's a direct-replacement noise suppressor used where EMI/RFI filtering is required for reliable operation. What it does:

• Suppresses electromagnetic and radio-frequency interference that can affect controls and electronics
• Helps prevent false signals or erratic behavior caused by electrical noise
• Supports stable operation of motors and electronic control boards
• Can reduce audible electrical noise or interference-related symptoms

• Disconnect power at the breaker before inspecting or replacing the capacitor
• Discharge the capacitor and avoid touching terminals; use insulated tools
• Verify wiring match and polarity before connecting