Wfw70hebw Parts

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This replacement hose clamp secures flexible water or drain hoses to fittings to help prevent leaks and keep connections tight. Durable metal construction provides reliable grip where hose-to-barb connections need fastening. What it does

• Secures a flexible hose to a barb or fitting to maintain a watertight connection
• Stops hose slippage that can cause leaks or intermittent water loss
• Helps stabilize hose routing to reduce chafing and wear
• Works on common appliance drain and supply hoses where a clamp is required

• One metal hose clamp

• Disconnect power and shut off water before servicing the appliance
• Position clamp over the hose barb and compress/turn as required using pliers or a screwdriver type matching the clamp style
• Tighten until snug—avoid over-tightening to prevent hose damage
• Inspect for leaks after restoring power and water

This flexible door boot gasket seals the dishwasher door to prevent water leaks and keep hot wash water inside the tub. It restores a tight, even fit between the door and tub for reliable operation. What it does:

• Creates a watertight seal along the door opening to reduce or stop leaks
• Helps maintain proper wash temperatures and simplify drying performance
• Prevents soil and water from escaping during wash cycles
• Worn, torn, or flattened gasket may cause visible leaks or pooling at the base

• One replacement door boot gasket

• Disconnect power and water supply before beginning any service
• Remove the dishwasher door or inner door panel per manufacturer instructions to access the gasket
• Align the gasket evenly around the door opening without twisting or over-stretching
• Inspect door and tub surfaces for damage and test for leaks after reassembly

This wire harness is the factory-style connector assembly that routes power and signals between the appliance control and components, restoring reliable electrical connections for normal operation. What it does

• Re-establishes secure electrical connections between the control board and components so controls and functions respond correctly
• Commonly used when intermittent operation, no power to components, or error codes indicate open/shorted wiring
• Prevents arcing and poor contact caused by damaged or corroded wires and terminals
• Restores proper signal and power paths to switches, motors, heaters or sensors when original harness is faulty

• Disconnect power (unplug or shut off breaker) before inspecting or replacing the harness
• Take photos or label connectors before removal to ensure correct reassembly
• Route and secure the harness away from sharp edges and moving parts; avoid pinching or excessive bending
• If terminals are damaged, replace the harness rather than attempting repairs to ensure safe, reliable connections

This spring-style hose clamp secures flexible water hoses to fittings to help prevent leaks and keep connections tight. It's a simple replacement that restores a proper seal at the hose connection. What it does:

• Compresses around a hose to hold it firmly on a tailpiece or barb
• Helps stop leaks or drips caused by loose or worn clamps
• Restores proper clamping force when original clamp is corroded or stretched
• Common symptom: visible water at the hose connection or water pooling under the appliance

• One spring-style hose clamp

• Disconnect power and shut off the water supply before servicing
• Slide clamp onto hose, push hose fully onto the fitting, then position clamp over the barb
• Use pliers to expand the clamp, seat it, and release to lock; avoid over-compressing the hose
• Replace any damaged hoses or fittings and test for leaks after restoring water and power

This door glass is the clear replacement glass for the front washer door, restoring visibility and a watertight barrier so you can safely view loads and keep laundry contained during cycles. What it does:

• Replaces cracked, chipped, or shattered front washer door glass
• Restores a clear viewing window so you can monitor the wash without opening the door
• Helps maintain a proper seal to prevent water leaks when installed with intact door gaskets
• Preserves safety and integrity of the door assembly when tempered glass is used

• 1 door glass

• Disconnect power and turn off water supply before beginning work
• Handle glass carefully; wear protective gloves and eye protection
• Removal typically requires taking the door or door panel off the hinge and separating the trim; follow your model's service manual

This small black clamp secures a hose, tube or wiring harness to prevent movement and abrasion. It's a direct-fit replacement used to keep connections stable so lines stay routed and protected during normal appliance operation. What it does

• Holds small hoses, tubing or wiring harnesses firmly in place
• Prevents chafing and accidental disconnection from vibration or movement
• Helps maintain routing to reduce stress on attached components
• Commonly used where a compact, non-corrosive clip is required

• Disconnect power before servicing any electrical appliances
• Use appropriate hand tools; avoid over-tightening which can damage hoses

This spring-style hose clamp secures flexible appliance hoses to fittings, preventing leaks and keeping connections tight during operation. It's a small but critical fastener for reliable fluid containment. What it does:

• Holds a rubber or plastic hose firmly to a barb or nipple to stop leaks
• Keeps drain, inlet, or recirculation hoses seated under pressure and vibration
• Helps prevent water damage and performance issues caused by loose hose connections

• Use pliers or a clamp tool to expand the spring clamp and slide it into position; release slowly to seat
• Inspect hose and fitting for damage and replace if cracked or worn before installing the clamp
• Disconnect power and water and follow appliance safety procedures before servicing

This rubber grommet cushions and protects a component by isolating vibration and preventing metal-to-metal contact. It helps reduce noise and wear for a more stable, quieter appliance. What it does:

• Cushions and isolates vibration between parts to reduce noise
• Protects wiring, hoses, or mounting studs from chafing and wear
• Keeps components properly seated and aligned during operation
• Worn or damaged grommets can cause increased vibration, rattling, or visible cracking

• Disconnect power (and water if applicable) before beginning any repair
• Inspect the surrounding area and the mating part for damage before installing the grommet
• Replace the grommet if torn, compressed, or hardened; press into place by hand or with a blunt tool to avoid damage

This mounting bracket secures panels or components in place to keep your appliance stable and aligned for reliable operation. It's a simple replacement that restores proper support and reduces rattling or movement. What it does

• Provides a secure mounting point for a panel, assembly, or component
• Keeps parts aligned to prevent vibration and noise during operation
• Restores structural support if the original bracket is bent, cracked, or broken
• Helps maintain correct clearances so adjacent parts operate smoothly

• One mounting bracket

• Disconnect power (and water, if applicable) before beginning any repair
• Use proper hand tools; avoid overtightening fasteners to prevent damage