Whirlpool Elite Parts

This drawer tray assembly is the platform that supports a refrigerator storage drawer and guides it along the slides. Replacing a cracked or damaged tray restores smooth operation, proper alignment, and dependable support for your food items.

• Supports the drawer bin and its contents inside the compartment
• Interfaces with the slide/rail system for smooth in-and-out travel
• Helps maintain proper alignment so the drawer opens and closes fully
• Common symptoms: cracked or broken tray, broken tabs, wobbling drawer, sticking/binding, or difficulty closing

• Disconnect power and empty the drawer before service
• Remove the drawer per your model's instructions; release tabs or screws securing the tray
• Position the new tray, ensuring tabs/rollers seat correctly; reinstall any fasteners
• Reinstall the drawer and check for smooth travel before reloading

An in-line union for appliance tubing, this tube connector joins two sections of plastic line to create a secure, leak-resistant connection in the water circuit, ideal for restoring flow after a repair, trim, or reroute. What it does:

• Connects two lengths of compatible plastic tubing to form a continuous run
• Helps maintain proper water delivery through the appliance's water system
• Can address leaks, drips, or loose/failed connections at a splice point
• Useful when replacing, shortening, or rerouting tubing during service

• 1 tube connector

• Disconnect power and shut off the water supply before servicing
• Cut tubing square; ensure ends are clean, round, and free of gouges
• Insert tubing fully into the connector until seated, then perform a gentle pull test
• Restore water and inspect all joints for leaks; use the connector size that matches your tubing's outer diameter

This controller assembly is the main electronic control board that manages temperature, compressor, defrost, and user interface functions for compatible refrigerators. Replaces a failed control to restore normal electronic control and display operation. What it does:

• Controls compressor cycles, defrost timing, and temperature regulation for the refrigerator
• Interprets user inputs from the console and updates the display/status lights
• Can resolve symptoms like unresponsive controls, blank or erratic display, or incorrect temperature control
• Works with associated sensors and relays to coordinate cooling and defrost cycles

• One controller assembly as shown

• Disconnect all power before attempting repair to avoid shock or damage
• Handle the board by its edges and avoid static discharge; use a grounding strap if available

Door gasket assembly provides a secure, flexible seal around the appliance door to prevent leaks and maintain proper internal conditions. Replacing a torn or worn gasket restores sealing performance and reduces leaks, drafts, or temperature loss. What it does:

• Forms the primary seal around the door to keep water, air, and temperature inside the appliance.
• Stops visible leaks or pooling around the door opening.
• Helps prevent temperature fluctuations, frost buildup, or loss of cleaning/drying performance caused by a poor seal.
• Addresses visible damage symptoms such as cracks, tears, deformation, or persistent odors around the door edge.

• Always disconnect power (and water, if applicable) before starting any repair.
• Remove the old gasket carefully; inspect and clean the door channel and mounting surface before installing the new gasket.
• Ensure the replacement gasket is fully seated and any retaining clips or fasteners are secured per OEM instructions; test the door for proper fit and sealing.

This fresh room tray assembly replaces the crisper drawer tray that holds fruits and vegetables, restoring proper storage and organization in the refrigerator's fresh/produce compartment. Durable plastic construction supports produce and helps keep the fresh room tidy. What it does:

• Provides the flat tray surface for the fresh/produce compartment so drawers slide and store items securely
• Restores proper support if the original tray is cracked, warped, or broken
• Helps prevent items from falling into lower compartments and keeps produce organized
• Replaces worn or damaged trays that interfere with drawer movement or sealing

• Unplug or disconnect power to the refrigerator before servicing for safety
• Remove contents and the crisper drawer before installing the replacement tray
• Slide or snap the tray into the existing tracks/locator tabs; no special tools typically required
• If the tray does not seat smoothly, verify track alignment and avoid forcing parts to prevent damage

Replacement water-line tube that routes water inside the refrigerator to the ice maker or dispenser, helping restore proper water flow and reduce leaks. Designed to match factory routing so the line fits and seals correctly at the connections. What it does:

• Carries water from the cabinet valve to the ice maker or dispenser.
• Restores normal dispenser flow and ice production when the tube is cracked, pinched, or clogged.
• Helps stop visible leaks or pooling caused by damaged or misrouted tubing.
• Matches factory bends for correct routing and clearance behind panels.

• Disconnect power and shut off the water supply before starting any work.
• Remove shelves or panels as needed for access; watch for sharp edges.
• Check and replace any worn clamps or fittings; tighten connections and test for leaks with water on before reassembling.

This genuine oven bake element heats the oven cavity for baking and roasting, restoring proper cooking temperatures and consistent results. Replaces a damaged or non-heating bake element to bring your oven back to service. What it does:

• Heats the oven cavity so food reaches and holds set temperatures
• Restores even baking and roasting when the oven fails to heat
• Replaces elements that show visible damage, burn-through, or no glow
• Works with electric ovens that use a separate bake heating element

• Disconnect power to the appliance at the breaker before starting work
• Handle the element carefully to avoid bending or damaging terminals
• Remove oven racks and access the element from inside the oven
• Verify proper fit and secure mounting; tighten terminal fasteners firmly and restore power to test

This genuine door gasket assembly replaces a worn or damaged refrigerator door seal to restore a tight closure and help maintain proper temperature. It's a direct-fit replacement that keeps cold air in and warm air out for better cooling performance. What it does:

• Seals the refrigerator door edge to prevent air leaks and reduce frost buildup
• Helps maintain consistent internal temperatures for food safety
• Reduces excessive compressor run time caused by a failing seal
• Stops drafts and moisture intrusion that can cause ice or condensation

• One door gasket assembly as shown

• Unplug the appliance before starting any work and remove any items from the door
• Peel out the old gasket and clean the gasket channel before installing the new seal
• Fit the gasket into the channel, working around the door so the seal seats evenly; warm water or a hair dryer may help soften the gasket for easier installation (use low heat)
• Check the door swing and seal around the perimeter after installation

This door gasket assembly replaces a worn or damaged refrigerator door seal to help maintain an airtight closure and consistent cooling. Restores proper sealing to reduce frost buildup and improve temperature control. What it does:

• Creates an airtight seal around the refrigerator door to keep cold air in and warm air out
• Helps prevent frost and moisture buildup inside the compartment
• Reduces strain on the compressor by improving energy efficiency when sealing is restored
• Common symptom: visible cracks, tears, gaps, or a door that fails to close tightly

• Disconnect power to the appliance before beginning any repairs
• Remove the old gasket carefully to avoid damaging the door finish or retainer; warm or softening the gasket can ease removal
• Align the new gasket evenly and press into the retainer; some models use screws or clips

This guide assembly is a factory-style mounting guide used in TV chassis to position and support internal components, helping maintain correct alignment and stable operation during use and service. What it does:

• Provides a mounting and alignment point for internal TV components to keep assemblies stable
• Helps maintain proper spacing between parts to prevent rubbing, misalignment, or rattling noises
• Can restore correct fit where a damaged or worn guide causes loose panels or shifting components
• Useful when repairing or replacing adjacent parts that rely on the guide for proper positioning

• Guide assembly

• Disconnect power and remove the TV from its wall mount or stand before servicing
• Handle the panel and internal boards carefully to avoid damage; use non-marring tools
• Keep track of all screws and grounding hardware removed during disassembly for reassembly

This guide assembly rail replaces a worn or damaged drawer slide to restore smooth, stable drawer movement and proper alignment. It helps reduce sticking, misalignment, and rattling for a secure fit and quiet operation. What it does:

• Guides and supports the drawer or compartment during open/close cycles
• Restores smooth sliding action and consistent alignment
• Reduces noise caused by worn or bent rails or guides
• Helps prevent drawers from catching or binding

• Disconnect power and empty the drawer before beginning service
• Removal of the drawer and access panel may be required; keep fasteners for reassembly
• Align the rail before tightening fasteners; use basic hand tools

This front plate assembly is the exterior cover that protects and finishes the front of the appliance panel while keeping internal components secure and aligned. It restores the appliance's appearance and helps maintain proper operation. What it does:

• Covers and protects controls, brackets, and internal components located at the front of the appliance
• Replaces cracked, bent, or cosmetically damaged front plate panels
• Helps prevent debris and moisture from reaching internal parts that can cause malfunctions
• Restores a clean, finished look to the appliance front

• Disconnect power to the appliance before starting any repair to avoid electrical shock
• Handle the part carefully to avoid scratching or damaging the finish during installation
• Installation may require removal of adjacent trim or control panel components; keep fasteners organized

This water tube routes drinking water from the refrigerator's supply to the dispenser/ice system, restoring proper water flow for dispensing and ice-making. Use when water flow is reduced, leaking, or the tube is cracked or clogged. What it does:

• Carries potable water between the internal components (valve, dispenser, ice maker) for dispensing and ice production
• Replaces cracked, split, or clogged tubing that causes leaks or poor water flow
• Helps stop visible leaks and restores consistent dispenser flow when tubing is the fault
• Compatible with systems that use a molded plastic water line rather than braided or metal tubing

• Turn off water supply and unplug the appliance before beginning work
• Drain residual water from the line and catch any spillage with a towel or small container
• Inspect fittings and seals; replace O-rings or clamps if damaged

This replacement burner is the cooktop surface heating element that provides consistent heat for pots and pans. It restores stovetop cooking performance and is sized to match the original heating location. What it does:

• Heats cookware on the stove top for boiling, frying, and simmering
• Replaces a cracked, non-heating, or intermittently working surface element
• Helps eliminate uneven heating and hotspots caused by a failing burner
• Designed to mate with the original cooktop terminals for proper electrical connection

• Disconnect power at the breaker before starting any repair to avoid shock
• Allow the cooktop to cool fully and handle the element carefully to avoid glass/ceramic damage
• Secure all connections

Replacement electronic controller that manages the appliance's main functions and user interface, restoring control of cycles, timing and display responses. Use this board to replace a failed or unresponsive controller and return reliable operation. What it does:

• Controls cycle timing, sequencing and key operational logic for the appliance.
• Interfaces with the user controls and display so selections and commands register correctly.
• Regulates signals to motors, valves and heaters as directed by the control program.
• Symptoms of a failing controller may include unresponsive buttons, incorrect or flashing error codes, display problems, or the appliance not starting.

• Always disconnect power to the appliance before starting any repair to avoid shock or damage.
• Handle the board by its edges and avoid touching circuitry; use proper ESD precautions if available.
• Basic tools are typically required to access the control housing.

This door gasket creates a tight seal around the refrigerator door to help maintain consistent internal temperature and reduce energy use. Replacing a worn or torn gasket restores door sealing and helps prevent frost buildup. What it does:

• Seals the refrigerator door edge to keep cold air in and warm air out
• Helps prevent frost and ice buildup in the fresh food or freezer compartment
• Common symptom: visible cracks, tears, or a gap causing warm food or temperature fluctuation
• Common symptom: condensation or frost along the door seal or inner cabinet

• Turn off power to the appliance and empty the door area before starting
• Remove the old gasket carefully; inspect and clean the gasket channel and mating surface before installing
• Press the new gasket into the channel evenly; ensure magnets seat fully for a consistent seal