Wm1487hrm Parts

This replacement door gasket seals the refrigerator fresh-food compartment to help maintain proper cooling and reduce energy loss. It restores a tight seal so the appliance keeps food fresher and runs more efficiently. What it does:

• Creates an airtight seal around the fresh-food door to keep cold air in and warm air out
• Helps prevent frost buildup and condensation caused by a failing seal
• Reduces excessive run time and temperature fluctuations linked to worn gaskets
• Stops drafts and keeps food from spoiling due to warm spots

• One door gasket

• Unplug the appliance or disconnect power before starting any repair
• Remove door trim or liner only if required for your model; align the gasket in the channel and press evenly to seat; some models may use screws or clips to secure the flange
• Inspect the door surface and gasket channel for debris or damage before installing

This clamp assembly secures a hose or component to its mounting point to help prevent leaks and reduce vibration. It replaces a worn or broken clamp so the connection stays tight and stable. What it does:

• Secures hoses, lines, or parts to their mounting points to maintain a sealed connection
• Helps reduce vibration and movement that can cause wear or noise
• Restores proper fit where a cracked, bent, or missing clamp allows leaks or misalignment
• Simple, direct replacement—matches the OEM attachment function

• Disconnect power and water before servicing to avoid shock or flooding
• Inspect mating surfaces and hose condition; replace hose if damaged before installing clamp
• Use pliers or a screwdriver as needed; tighten to a snug fit—do not over-tighten
• Follow the appliance's service manual for disassembly/reassembly guidance and safety

This inlet valve assembly controls water flow into the appliance, restoring proper fill operation and helping prevent leaks when the original valve fails. Designed as a direct replacement part for affected models. What it does:

• Opens and closes water flow to start and stop appliance filling
• Works with the appliance's control system to deliver the correct fill volume
• Stops water flow when closed to help prevent overfilling and leaks
• Commonly replaces valves that drip, won't fill, fill continuously, or trigger fill-related error codes

• Shut off water supply and unplug the appliance before starting any work
• Drain remaining water from hoses and remove pressure before disconnecting plumbing
• Basic hand tools required; keep track of mounting hardware and gaskets
• After installation, restore power and water, then test for proper fill and leaks

This door boot gasket forms the flexible seal between the outer tub and cabinet opening on a front-load washer to keep wash water contained. Replace a torn or moldy boot to stop leaks and lingering odors.

• Creates a watertight seal between the outer tub and the door opening
• Flexes with drum movement to maintain a reliable barrier during wash and spin
• Helps resolve leaks at the door, visible rips or cracks, water on the floor after a cycle, and musty smells that persist after cleaning

• Unplug the washer and turn off water supply before servicing
• Remove the front panel as needed; note the boot's orientation before removal
• Clean mounting grooves; seat the new boot evenly all the way around and secure clamps firmly
• Run a quick cycle to check for leaks after reassembly

The NOISE FILTER ASSEMBLY is an OEM part for LG washing machines. It is a component designed to minimize vibrations and reduce noise emanating from the washer during operation. Proper noise damping is important for smooth functionality without disturbance.

Causes of a bad noise filter assembly can include cracks or tears developing over extended use. Physical damage from impact could also compromise its noise-blocking abilities. 

Symptoms of a bad noise filter assembly include:

• Loud banging or clanking noises during wash and spin cycles
• Excessive vibrations felt through the washer cabinetry 
• Increased stress on other components from inadequate dampening
• Premature wear of suspension components like legs and runners

Replace yours today with this genuine OEM LG part to restore a quiet wash experience. This replacement assembly ensures optimum vibration control. It is also compatible with Sears/Kenmore models.

This flexible door boot gasket forms the watertight seal between the washer door and tub to keep water inside during cycles. Replaces a torn, stretched, or worn bellows to stop leaks and restore a secure door seal. What it does:

• Seals the washer door to prevent water from leaking during wash and rinse cycles.
• Compensates for movement between the door and tub while maintaining a watertight barrier.
• Commonly needed when the bellows shows visible tears, cracks, or heavy wear.
• Helps reduce water pooling and mildew buildup caused by gaps or pinholes.

• Disconnect power and water supply before starting any repair.
• Inspect the tub and door mating surfaces; clean before installing the new bellows for a proper seal.
• Some models use internal clamps or retaining rings—retainers must be reinstalled or replaced exactly as removed.

This hanger assembly replaces a worn or broken pivot that helps support and guide a refrigerator/freezer door. Restores proper door alignment and smooth opening so the seal closes correctly and the door operates as intended. What it does:

• Provides the pivot point that supports the door and enables smooth swing motion
• Keeps door aligned to maintain an effective gasket seal and prevent drafts
• Replaces worn, cracked, or bent pivot hardware that can cause uneven or binding doors
• Works with the existing hinge components to restore stable door operation

• Disconnect power and remove any stored items from the door before starting
• Support the door during removal to prevent dropping or damage to the cabinet
• Use basic hand tools; avoid over-tightening fasteners to prevent stress on the part
• If alignment issues persist after replacement, check hinge and strike components for wear