Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Multi-wire harness connects washer control system to components. Replace if harness is damaged, burnt, or has broken wires affecting power distribution.
I replaced a rotor position sensor switch and harness. It was a simple repair. Tools required cross tip head screwdriver, 10mm and 17mm socket, and rachet. Also had o replace 2 zip ties that held the harness in place. Prior to repair, I watched a video on Appliance Parts Pros website. It was very helpful and informative. One last thing, the persons who answer the calls are very helpful. Read more
Replaces worn or leaking washer door boot gasket. Install when water leaks from door during wash cycles. Verify your model uses the portless version.
Removed back cover removed stator and checked bearings. bearings were good.removed top control paneland front.then removed tub .seperated tub removed drum.the spyder was coroded into replaced spyder bearings and seal. reassembled washer.works like a champion. Read more
Channels household water to your washer's fill system. Replace if cracked, leaking, or worn to restore proper flow and prevent water damage to floors.
Replaced Read more
Fixes washer that won't spin or makes grinding noises during spin cycle. This rotor assembly mounts on the motor and works with the stator to turn the drum.
Replaced rotor assembly, repaired wiring. Read more
Leveling leg assembly for front-load washers. Replaces broken, rusted, or missing legs. Adjustable threaded design stabilizes washer. Sold as 4-pack.
Installed the leg assembly and adjusted them to where the washer would not shake. Read more
Mounts the door hinge to your washer's front cabinet. Replace if bracket is bent, broken, or missing to restore proper door alignment and sealing.
The dealer gave us a door but it didn't fit. Everything we bought from Appliance Parts Pros.com was fixed with just a screwdriver. Easy and fast. Shipping was fast also. The longest time was installing the hinges on a stacked washer and dryer. Read more
Replace your dryer's control knob assembly when cracked, melted, or broken. Restores selection of temperature, cycle, and power settings. Easy install.
#1. Watched a You Tube Video #2 Watched it again #3 Followed directions and replaced control knob #4 Did laundry It was very simple, so simple a retired pilot could do it. I recommend watching you tube videos for any undertaking you aren't sure of. Happy Repairing. Read more
Seals the door opening on front-load washers to contain water during cycles. Replace if torn, deformed, or mildewed to restore a watertight seal.
The upper counter-balance weight mount design is a poor design to begin with. It started to rattle loose approximately 5yrs into the 8yrs that we've owned it. As it would start to loosen up (as evidenced by the loud banging noise exhibited during operation); I'd shut it down, pull the top off, remove the weight (it was almost always half rattled off at this point), wrap the mount lugs with friction tape (the plastic lugs were being worn down/chaffed by the balance weight), put the weight back... Read more
Leaking water during fill cycle or pooling under your washer? This inlet hose supplies fresh water from your household line. DIY-friendly repair.
Joins two internal water lines in your washer. Replace this coupler if cracked, worn, or leaking to restore a secure connection during fill and wash cycles.
Following what I've seen or watched from you tube video clinic "how to replace drain pump for LG Washer, model wm2277hw and the help that I received from representative/ customer service of appliacepartspros, I fixed our LG Washer no problem. I am very much thankful to the representative of AppliacePartsPros who help me analyzed the problem and recommended the right parts that I needed and most importantly arrived 2 days as ordered. I would recommend AppliacePartsPros for ordering your parts. Read more
Washer won't agitate or spin properly? This rotor position sensor tracks motor speed to restore wash and spin cycles. Common direct-drive motor fix.
This drain hose connects your washer's tub to the pump, routing water out during drain cycles. Replace if leaking, cracked, or causing drain errors.
Based on info around the web and your site I chose to replace all of the bellowed hoses (3) in the machine, as I did not know which bellow was leaking without taking the washer apart first. If one hose was old enough to leak I figured the others were not far behind. The appliance parts pros videos were very helpful, although I chose to replace the drum drain bellows via access through the rear panel thereby saving myself the time of disassembling the front of the machine, as was instructed. In... Read more
Fix washer leaking during fill or not filling properly with a new internal inlet hose. Routes water from valve to wash system. DIY repair in 30 minutes.
Blue plastic cap for washer fabric softener dispenser. Replaces cracked, warped, or missing caps that cause drawer sticking. Clips over dispenser hole.
I searched online for the parts I needed. I found a few different sites that had what I needed, but decided to order through appliancepartspros.com. I had never used them in the past. Read more
Mounts to the washer's lower frame to secure components and maintain alignment. Replace if bracket is cracked, broken, rusted, or missing hardware.
Replaced spider arm, bearings, drum seal. AppliancePartsPros had the overall cheapest price and factory parts not knockoffs. Had all my important parts <2 days and the rest on the third day. Good on line tutorial ideas. Good company. Will do business again. Read more
Wrench designed to adjust leveling legs on washers and dryers. Install to properly level your appliance and reduce rocking. Needed when original is missing.
AppliancePartsPros had the needed items in stock, and I had them within 48 hours of the parts being shipped. Read more