Wm4000 Parts

This tub assembly is the inner drum component for compatible front-load washers, providing the rotating basket that holds laundry during wash cycles for effective tumbling and water drainage. What it does

• Replaces the washer's inner drum that holds and tumbles clothes during wash and spin cycles.
• Restores proper rotation to reduce rubbing, grinding, or noisy operation caused by a damaged drum.
• Helps ensure proper water drainage and balanced spinning when the drum is intact and centered.
• Can resolve symptoms like loud thumping, scraping noises, or clothes catching on a damaged drum surface.

• Disconnect power and water supply before beginning any repair.
• Drum assemblies are heavy — get a helper and use proper lifting technique.
• Installation typically requires removing the washer cabinet and drive components; follow the OEM service manual or a step-by-step guide.

This connector nozzle is a small replacement plumbing/airflow fitting that restores a secure, directed connection between hoses or tubing in compatible LG appliances. It helps stop leaks and keeps fluid or airflow routed where it belongs. What it does

• Provides a sealed connection point for a hose or tube to the appliance
• Directs fluid or air flow through the intended channel to prevent leaks or misrouting
• Replaces worn, cracked, or damaged nozzles that cause dripping or reduced performance
• Fits into the appliance's existing plumbing or tubing coupling to restore proper operation

• One connector nozzle

• Turn off power to the appliance before beginning work
• Shut off the water supply and relieve any pressure if the nozzle is part of a water line
• Remove only the damaged nozzle and install the replacement by seating it fully and securing clamps or fittings as originally installed
• If you notice persistent leaks after installation, recheck hose seating and clamps.

The Door Boot Seal is an OEM component specifically designed for LG front-loading washing machines. Located between the outer drum tub and inner cabinet panels, flexible thermal seals help contain moisture during heavy-duty wash cycles.  

Causes of a bad door boot seal can include cracks developing due to impact or flex stress, along with air leaks resulting from compression damage or material wear over extended use.

Symptoms of a bad door boot seal include:

• Standing water or puddles accrued beyond the spinning tub perimeter  
• Visible moisture escaping between cabinet seams and door frame edges
• Seal detaching from the drum or inner wall surfaces allowing air gaps

Replacing with an authentic LG boot restores a tight moisture barrier critical to draining washtubs fully. Kenmore and Samsung front-loaders utilizing LG designs also source this precise seal as original equipment. 
 

This door boot gasket forms the flexible seal between the outer tub and cabinet opening on a front-load washer to keep wash water contained. Replace a torn or moldy boot to stop leaks and lingering odors.

• Creates a watertight seal between the outer tub and the door opening
• Flexes with drum movement to maintain a reliable barrier during wash and spin
• Helps resolve leaks at the door, visible rips or cracks, water on the floor after a cycle, and musty smells that persist after cleaning

• Unplug the washer and turn off water supply before servicing
• Remove the front panel as needed; note the boot's orientation before removal
• Clean mounting grooves; seat the new boot evenly all the way around and secure clamps firmly
• Run a quick cycle to check for leaks after reassembly

This factory bolt assembly is a hardware fastener used to secure designated components within the appliance. Replacing a worn or missing bolt restores a tight, stable connection to help reduce vibration and noise while keeping parts properly aligned. What it does:

• Secures a component to its bracket, frame, or base
• Maintains alignment and stability of the assembly
• Helps minimize vibration and rattling when tightened correctly
• Common symptoms: missing or stripped bolt, loose connection, unusual vibration/noise, visible damage to the bolt head or threads

• Disconnect power and, if applicable, shut off water supply before servicing
• Support the component being fastened to prevent strain while removing/installing the bolt
• Start threads by hand to avoid cross-threading; tighten snugly per OEM guidance—do not overtighten
• Reinstall any washers, sleeves, or grommets in the original order if present

The Dispenser Assembly is an OEM replacement part for LG washing machines. It is a component that houses the detergent and fabric softener compartments, responsible for dispensing the proper amounts of these products during the wash cycle. The dispenser assembly is designed to release the detergent and fabric softener at the appropriate times.

Symptoms of a bad Dispenser Assembly can include:

• Improper or inadequate dispensing of detergent or fabric softener
• Leaks or drips from the dispenser area
• Clogging or blockages in the dispenser compartments
• Detergent or fabric softener residue left in the compartments after a cycle

Causes of a bad dispenser assembly can range from buildup of residue or debris over time, to mechanical issues with the release mechanisms or components within the assembly. Exposure to moisture or high humidity can also contribute to the premature failure of the dispenser assembly.

This OEM LG part is also compatible with Sears/Kenmore washing machines.

The Stator Assembly is an OEM part for LG washing machines. The stator assembly acts as the stationary component of the motor that drives the wash drum and basket. It converts alternating current into mechanical motion through electromagnetic induction, working together with the rotor to power the motor.

Causes of a bad stator assembly can include defects in the windings, bearing wear, or damage due to excessive heat.

Symptoms of a bad stator assembly include:

• The motor failing to start or run
• Abnormal noises coming from the transmission
• Vibration or shaking issues
• Inability to advance cycles

This OEM LG part is also compatible with some Kenmore models.

This is the main control (power control) board assembly that manages a refrigerator's core functions and power distribution. Replacing a faulty board restores control of compressors, valves, lights and user interface signals. What it does:

• Regulates and routes power to the refrigerator's major subsystems (compressor, fans, valves, lights).
• Interprets user inputs and runs control logic for cooling cycles and defrost.
• Helps stabilize operation; a failed board can cause intermittent operation or complete failure to start.
• Common symptom indicators: blank or unresponsive display, no cooling, erratic cycling, or persistent error codes.

• One main control (power control) board assembly.

• Disconnect mains power before beginning any repair to avoid shock or damage.
• Handle the PCB by its edges and avoid contact with component leads; observe ESD precautions.
• Verify the part number on the existing board matches this replacement before installing.

The NOISE FILTER ASSEMBLY is an OEM part for LG washing machines. It is a component designed to minimize vibrations and reduce noise emanating from the washer during operation. Proper noise damping is important for smooth functionality without disturbance.

Causes of a bad noise filter assembly can include cracks or tears developing over extended use. Physical damage from impact could also compromise its noise-blocking abilities. 

Symptoms of a bad noise filter assembly include:

• Loud banging or clanking noises during wash and spin cycles
• Excessive vibrations felt through the washer cabinetry 
• Increased stress on other components from inadequate dampening
• Premature wear of suspension components like legs and runners

Replace yours today with this genuine OEM LG part to restore a quiet wash experience. This replacement assembly ensures optimum vibration control. It is also compatible with Sears/Kenmore models.

The washer Hose Retainer Holder Clip is an OEM part that mounts behind the control panel on LG front-loading washers. It positions water supply hoses to prevent kinks or stress that leads to leaks over time. 

Causes of a failed clip include fatigue from years of front-load vibration and damage from any installation or repair work behind the control panel.

Symptoms of an insufficient hose retainer clip include:

• Loose, misrouted, or flopping hoses behind the control panel
• Bulging or kinked hoses that restrict water flow
• Water leaks at hose connections

This OEM replacement clip is compatible with select Kenmore front-loaders.

This single wire harness connects electrical components to restore power and signal routing for the appliance. It replaces a damaged or worn harness to help re-establish reliable electrical connections. What it does:

• Transfers power and signals between control boards, sensors, and actuators
• Helps resolve intermittent operation, failure to start, or component non-response when caused by wiring faults
• Replaces frayed, burned, or connector-damaged wiring to restore proper circuit continuity
• Matches OEM connector types and routing for a direct-fit replacement

• One single wire harness as shown

• Power off and unplug the appliance before beginning any repair
• Verify the harness routing and connector orientation match the original before securing
• Use appropriate tools and avoid pinching wires; replace any mounting clips that are damaged

This hanger assembly replaces a worn or broken pivot that helps support and guide a refrigerator/freezer door. Restores proper door alignment and smooth opening so the seal closes correctly and the door operates as intended. What it does:

• Provides the pivot point that supports the door and enables smooth swing motion
• Keeps door aligned to maintain an effective gasket seal and prevent drafts
• Replaces worn, cracked, or bent pivot hardware that can cause uneven or binding doors
• Works with the existing hinge components to restore stable door operation

• Disconnect power and remove any stored items from the door before starting
• Support the door during removal to prevent dropping or damage to the cabinet
• Use basic hand tools; avoid over-tightening fasteners to prevent stress on the part
• If alignment issues persist after replacement, check hinge and strike components for wear

This inlet hose connects the home water supply to the appliance so it can fill properly. It replaces a worn or leaking supply hose to restore safe, reliable water flow for normal cycles. What it does:

• Directs incoming water from the household supply to the appliance inlet valve
• Works with the appliance's inlet valve and fittings to allow proper fill and rinse actions
• Commonly replaces hoses that leak, spray, kink, or block water flow
• Helps stop slow fills or intermittent filling caused by damaged or deteriorated hoses

• One inlet hose

• Turn off water supply and disconnect power before starting work
• Inspect and replace any damaged O-rings or fittings; use approved replacement fittings if needed
• Hand-tighten connections, then snug with a wrench—avoid over-tightening to prevent damage
• After installation, restore water and power, run a short fill cycle, and check all connections for leaks

This cabinet cover is a direct-replacement outer panel that restores the appliance's finished look while protecting internal components from dust and debris. It helps keep the cabinet sealed and prevents exposure from a damaged or missing panel. What it does:

• Replaces a cracked, dented, or missing cabinet cover to restore appearance
• Shields internal parts and wiring from dust, spills, and foreign objects
• Reduces rattles and vibration caused by loose or damaged panels
• Helps preserve proper airflow pathways by keeping the cabinet closed

• Disconnect power to the appliance before starting any work.
• Handle edges carefully; metal panels can be sharp.
• Basic hand tools are typically required; keep screws and mounting hardware organized.