Wm4000 Parts

The Shipping Bolt is an OEM part for LG washing machines, designed to secure the washing machine's drum during transportation. These bolts are important for preventing damage to the drum and suspension system by immobilizing the drum, thereby avoiding any excessive movement or vibrations that could occur while moving the appliance. 

Causes of a bad shipping bolt can include improper removal during installation, damage from handling, or degradation over time if it was left in place during operation. A damaged or missing shipping bolt can lead to issues with the washing machine's drum alignment and overall stability.

Symptoms that indicate the shipping bolts need removal or installation include:

• Excessive noise or vibrations during operation, suggesting the bolts were not removed after installation.
• Damage to the washing machine's drum or suspension system after moving the appliance without the bolts properly installed.

This OEM LG part can also be used on Kenmore/Sears appliances. 

Secures the washer’s tub and basket during moving to prevent internal damage. If the originals are missing after a move, install replacements for transport and remove them before using the washer.

What it does

• Locks the tub and basket to limit movement in transit
• Helps prevent suspension damage and internal rattles while relocating
• Replaces missing, bent, or stripped transport bolts
• Useful for moves, storage, or service shipments

What’s included
One shipping bolt assembly (sold individually).

Install notes

• Unplug power and turn off water before service
• Insert through the rear panel into the designated mounting point; tighten snugly—don’t overtighten
• Do not operate the washer with shipping bolts installed; remove all bolts after placement
• Some models use multiple bolts and lengths—match count/positions to your owner’s manual

Usage tip
After removal, bag and tape the bolts to the cabinet so they’re on hand for the next move.

This pivot hanger assembly supports and stabilizes the appliance component it mounts to, restoring smooth movement and alignment. Replace a worn or damaged pivot to reduce noise and prevent misalignment that can affect operation. What it does:

• Acts as the pivot point for the hanger to support the drum/door assembly and maintain correct alignment
• Helps eliminate squeaks, scraping, or jerky motion caused by a worn pivot
• Prevents sagging or uneven movement that can lead to rubbing or binding
• Restores proper mechanical support so the appliance operates quietly and reliably

• Unplug the appliance or disconnect power before beginning any repair
• Basic hand tools may be required; follow the appliance service manual for disassembly steps
• Inspect surrounding components (mounts, bearings, fasteners) and replace if worn

Restore accurate feedback to your appliance with this sensor assembly. It monitors conditions at its mounting point and relays that information to the control so cooling cycles run correctly and the unit maintains your selected temperature.

• Detects temperature at the sensing location and sends a resistance signal to the main control
• Helps the control regulate compressor and fan operation to maintain setpoint
• Failure can lead to poor cooling performance, short cycling or long run times
• May trigger sensor-related error codes or prevent the unit from reaching the set temperature

• Disconnect power before servicing and allow components to cool
• Access the sensor, noting wire routing and connector orientation
• Release the retainer/clip, avoid pulling on wires, and transfer any insulation or clips from the original part if present
• Route the harness away from sharp, hot, or moving parts; fully seat the connector, reassemble, and test operation

The Drain Pump Assembly is an OEM part for LG washing machines. It is responsible for pumping water out of the washing machine tub at the end of each cycle.

Causes of a bad drain pump can include motor failure, blockages in the pump's internals, cracks or fractures in the plastic body, or damaged impeller.

Symptoms of a bad Drain Pump include:

• Water not fully draining out after cycles
• Pump making strange noises when attempting to drain
• Standing water or flooding inside the washing machine

This OEM LG part is also compatible with some Kenmore models.

This power cord assembly restores a secure electrical connection to your appliance so it can safely receive power. It replaces a worn, damaged, or faulty cord to help prevent interruptions and poor contact during normal use. What it does:

• Re-establishes the appliance's main power connection for reliable operation
• Replaces frayed, burnt, or damaged cord insulation and terminals
• Can stop intermittent power loss, sparking, or poor contact at the cord connection
• Provides the correct OEM-fit electrical cord and connector interface

• Always disconnect power at the breaker or unplug the appliance before starting work.
• Tighten terminal screws securely and avoid pinching or kinking the cord.

This multi-connector harness is the replacement wire assembly that links the appliance's control board to multiple components so signals and power flow correctly. Installing the correct harness restores reliable electrical connections and control response. What it does:

• Routes power and signal between the control board and connected components using multiple color-coded wires and connectors
• Replaces damaged, burnt, or frayed wiring that can cause intermittent operation or failure to start
• Prevents short circuits and poor connections that produce error codes or erratic performance
• Maintains correct connector pin layout for proper component communication

• One multi-connector harness (single assembly)

• Disconnect power before beginning work to avoid shock or damage
• Verify connector orientation and full seat on both ends; do not force mismatched plugs
• Inspect mating connectors and terminals for damage or corrosion before installation

This genuine power cord assembly restores safe electrical connection to your appliance by replacing a damaged or worn power lead. Durable wiring and molded connectors help ensure a reliable feed for normal operation. What it does:

• Replaces a faulty or damaged power lead to restore power flow to the appliance
• Provides a secure, molded connection between the appliance and household power
• Can stop symptoms like no power, intermittent power loss, or tripped breakers caused by a compromised cord
• Helps eliminate loose or exposed wiring that can cause arcing or electrical smell

• Disconnect appliance from power before inspecting or replacing the cord.
• Match connector orientation and seating; secure strain relief and routing per appliance harness.
• Inspect mounting points and strain relief; do not use if connectors or wiring show damage.