Wmh32519 Parts

The Fan Motor is an OEM part for Whirlpool microwaves. This fan motor is responsible for circulating air through the venting system. It works to evacuate fumes, smoke, and odors from the cooking area and direct them outside through the vent hood.

Causes of a bad fan motor can include excess dust or debris buildup hindering performance, bearing wear over time, or failure of electronic motor components.

Symptoms of a bad fan motor include:

• Inadequate or no air flow from the vent hood
• Strange noises coming from the vent system
• Reduced hood lighting levels
• Overheating or burning smells detected from the cooking surface or vent hood

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Restore a solid, comfortable grip on your appliance door. This replacement door handle refreshes the look of your unit and makes opening and closing the door feel smooth and secure again. What it does:

• Provides the handhold needed to open and close the door
• Replaces a cracked, broken, or missing handle
• Helps correct a loose or wobbly handle
• Improves appearance when the original is scuffed or worn

• 1 door handle

• Disconnect power to the appliance before servicing
• Protect the door surface with tape or a cloth while working
• Use the correct driver (hex/Torx/Phillips) per your model to remove set screws or mounting screws
• Align the handle on the studs/mounts and tighten evenly without overtightening; verify smooth door operation

Complete door assembly for over-the-range microwaves that restores a secure latch, proper sealing, and safe operation. Installs as a direct-fit replacement to repair cracked, bent, or non-closing doors and restore normal use. What it does:

• Replaces the full microwave door assembly—outer panel, inner liner, and mounting points—to restore structural integrity.
• Restores proper door latching and sealing to help the oven operate safely and retain heat.
• Addresses symptoms such as a door that won't close or latch, visible door damage, or misalignment.
• Works with the existing hinge and latch hardware to reestablish correct door movement.

• Disconnect power before beginning any repair; microwave capacitors can retain a hazardous charge.
• Installation requires removing the outer trim and unfastening door mounting screws; keep hardware organized for reassembly.
• Inspect door switches and latch during install; replace damaged switches per OEM instructions.

Replacement plate that restores fit and finish for compatible Whirlpool appliances. Install to replace a cracked, warped, or cosmetically damaged plate and help maintain proper component alignment and appearance. What it does:

• Replaces a damaged or worn plate to restore the appliance's original coverage and appearance.
• Helps prevent gaps where food, grease, or debris can collect around the affected area.
• Maintains proper alignment and support for adjacent parts that rely on the plate for mounting or spacing.

• Disconnect power to the appliance before beginning any repair.
• Use basic hand tools and follow the OEM diagram for correct orientation and fastener locations.
• Inspect mounting hardware and any gaskets; replace separately if worn or damaged.

The Interlock is an OEM part for Whirlpool microwaves. It is a safety device that prevents the microwave from operating unless the door is securely closed.

Causes of a failing microwave interlock can include wear and tear of moving parts over extended use. Physical damage from excessive force on the door or foreign debris caught in the locking mechanism can also disable proper function.

Symptoms of a bad interlock include:

• Microwave runs with the door open
• Cycle does not start until door is repeatedly opened and closed
• Error code indicating door lock problem

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Interlock Switch is an OEM part for Whirlpool microwave ovens. It is an electrical component of the safety interlock system that prevents the microwave from operating unless the door is securely closed.

Causes of a bad interlock switch can be prolonged exposure to microwave energy, which can degrade electrical contacts over many years. Physical damage from excessive force on the door or foreign debris is also possible.

Symptoms of a failed interlock switch include:

• Microwave runs with the door open
• Cycle does not start until door is repeatedly opened and closed
• Error code indicating door lock problem

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This grill vent is the outer vent trim that restores proper airflow and appearance for your appliance. It replaces a cracked, broken or missing vent to help keep the oven or range exterior neat and allow normal ventilation. What it does:

• Covers and protects the appliance vent opening while directing air flow
• Replaces damaged or melted vent trim that can detract from appearance
• Helps keep debris and large particles out of the vent path
• Visible exterior part—symptoms include cracks, warping, discoloration or gaps at the vent area

• Disconnect power to the appliance before beginning any work
• Typically installs with simple clips or screws; retain all fasteners and trim pieces
• Inspect surrounding trim and seals for damage and replace if needed

Color: Black

This control panel is the oven console assembly that houses the touchpad, display, and controls so you can set bake/temperature functions and timer features. It restores user input and visible status feedback on the range/oven. What it does:

• Provides the user interface for selecting bake, broil, timer and other oven functions
• Transmits button and touchpad commands to the oven control board
• Displays temperature, time and error codes on the console display
• Common symptom fixes: unresponsive buttons, blank or garbled display, or inability to start oven functions

• Disconnect power at the breaker before beginning any repair to avoid shock.
• Handle with care to avoid damage to the display or ribbon/connector cables.
• Follow OEM disassembly steps: remove backguard/console fasteners, disconnect wiring harness, swap the panel, then reconnect and test.

This replacement mounting plate secures internal components so the appliance operates quietly and stays aligned. Replacing a damaged or bent plate helps stop rattling, prevent part movement, and restore proper fit between adjoining parts. What it does:

• Provides a stable mounting surface for nearby components and fasteners
• Prevents parts from shifting or vibrating during operation
• Helps eliminate rattling or noise caused by a loose or bent plate
• Restores correct alignment where the original plate was damaged or deformed

• One replacement plate

• Disconnect power (unplug appliance or turn off circuit) before starting any repair
• Wear gloves and eye protection; edges may be sharp
• Use correct fasteners and torque to avoid bending the new plate;

This reflector directs and shields the oven light and surrounding area, helping maintain safe illumination and protecting the lamp from direct contact with food and heat. Fits behind the interior lamp in compatible ranges. What it does:

• Reflects and directs oven lamp light for improved interior visibility
• Shields the light from splatters and oven heat to protect the bulb assembly
• Helps maintain consistent light positioning after bulb changes or during cleaning
• Common symptom: dim or uneven oven lighting or a cracked/discolored reflector

• One reflector

• Disconnect power to the appliance and allow the oven to cool completely before starting
• Remove the oven light bulb and lens/cover to access the reflector
• Handle carefully to avoid bending or scratching; reassemble lamp components securely