Wmh53520cs Parts

This door latch is the replacement latching mechanism that secures the appliance door during operation, restoring proper door closure and safe operation. It fits the factory mounting and engages/disengages the door as designed. What it does:

• Secures the door closed so the appliance can run and maintain temperature or cycle safety systems
• Replaces a broken, worn, or loose latch that won't hold the door shut
• Commonly used when the door won't stay closed, won't latch, or the appliance won't start because the door is not detected as closed
• Engages with the door strike to ensure a positive, spring-loaded closure

• One door latch

• Disconnect power (unplug or switch off breaker) before beginning any repair
• Access may require removing the oven/dryer front panel or door trim
• Align the latch with the mounting holes and secure with the original screws; test latch operation before fully reassembling
• If electrical connectors are present, ensure they are fully seated and undamaged

This fan wheel spins inside the appliance to move air through the system, restoring proper airflow for heating and cooling. It replaces a cracked, worn, or unbalanced wheel to reduce noise and improve performance. What it does:

• Circulates air through the appliance to support heating, cooling, or ventilation
• Helps maintain consistent temperatures and prevents motor overload from restricted airflow
• Reduces rattling or grinding noise caused by a warped or broken wheel
• Restores proper airflow when the original wheel is damaged or missing

• One fan wheel

• Disconnect power to the appliance before starting any repair
• Access may require removing an access panel or cabinet components; follow the manufacturer's service instructions
• Inspect the blower housing and mounting for damage; replace any damaged clips or fasteners
• Ensure the wheel spins freely and is seated correctly on the motor shaft before reassembly

This control transformer provides the low-voltage power needed for the appliance's control board and user interface, restoring reliable operation of displays, timers, and electronic controls. What it does

• Steps appliance line voltage down to the control circuit voltage so electronic controls and displays can operate.
• Commonly replaced when controls, displays, or touchpads lose power or behave intermittently.
• Helps resolve symptoms like dim or blank control displays, non-responsive touch controls, or intermittent electronic operation.
• Designed to match mounting and wiring of the original part for straightforward replacement.

• One transformer assembly as shown.

• Turn off and unplug the appliance (or shut off circuit breaker) before servicing to avoid electrical shock.
• Verify wiring locations and take a photo before disconnecting; reconnect matching each terminal.
• Inspect associated fuses and connectors; replace any damaged wiring or connectors during installation.

This air deflector redirects airflow inside the appliance to help maintain proper circulation and protect components from direct airflow. Replacing a damaged deflector restores intended air paths and can reduce uneven temperature or noise. What it does

• Guides air where the manufacturer intended to ensure even circulation.
• Protects nearby components from direct airflow and wear.
• Helps reduce symptoms like uneven cooling/heating or unusual airflow noise.
• Works as a passive airflow-management part — no electrical connection.

• Disconnect power to the appliance before starting any repair.
• Handle the deflector carefully to avoid cracking plastic tabs during removal or installation.
• Installation typically requires basic hand tools; for exact steps.

Color: Black

This motor cover shields the motor assembly and nearby components from debris and accidental contact. Replacing a cracked or missing cover restores proper protection and can reduce noise caused by objects rubbing against moving parts.

• Covers the motor area to block dust, grease, and foreign objects
• Helps secure the motor housing and maintain proper clearances
• Can quiet rattling or scraping caused by a loose or broken cover
• Common signs: cracked, warped, or missing cover; scraping/rattling from the motor area; visible motor exposure

• Disconnect power at the breaker or unplug the appliance before servicing
• Access the motor compartment per your model's service/installation information
• Retain and reuse the original screws/fasteners unless damaged
• Do not overtighten fasteners to avoid cracking the new cover; verify clearances before testing

This support is a replacement mounting bracket that helps secure internal components and keeps assemblies aligned for proper operation. Installing a new support can reduce movement, rattling, or misalignment of the attached parts. What it does:

• Holds and stabilizes a component or assembly inside the appliance
• Prevents excess movement that can cause vibration or noise
• Keeps parts aligned to ensure smooth mechanical operation
• Helps maintain proper spacing between connected parts to avoid wear

• Disconnect power (and water, if applicable) before beginning any repair
• Use appropriate hand tools; avoid overtightening mounting screws
• Wear safety gloves and eye protection; handle sharp sheet-metal edges with care

This support is a replacement structural mounting piece that helps hold and stabilize the appliance assembly, restoring proper alignment and reducing vibration. Use it when worn or broken supports allow panels or components to shift. What it does

• Provides structural support and alignment for the affected assembly to prevent sagging or misalignment.
• Reduces vibration and rattling caused by loose or damaged mounting points.
• Helps maintain proper spacing so moving parts operate without interference.
• Common symptom: visible damage, loose panels, unusual noise or movement during operation.

• One support part as shown.

• Disconnect power and water (if applicable) before starting any repair.
• Inspect adjoining fasteners and mounts; replace any that are damaged for a secure fit.
• Basic hand tools typically required; handle plastic tabs and clips carefully to avoid breakage.

This evaporator fan motor circulates cold air through the freezer and refrigerator compartments to maintain even temperatures and consistent cooling. Replaces a failed or noisy motor to help restore airflow and temperature stability. What it does:

• Spins the evaporator fan blade to move cold air across the evaporator and into the cabinet.
• Helps prevent warm spots and uneven cooling when operating correctly.
• Commonly replaced for noisy operation, failure to run, or intermittent airflow.
• Compatible with refrigerators that use this OEM-style fan motor design.

• Disconnect power to the appliance before starting any repair.
• Access typically requires removing interior panels or the evaporator cover; keep screws and fasteners organized.
• Inspect the fan blade and housing for ice buildup or obstructions before installing the new motor.

This door handle is a direct-replacement part designed to restore proper grip and function to your appliance door. It fits the original mounting points and gives a secure, easy-to-use handle for everyday opening and closing. What it does:

• Provides a secure grip to open and close the appliance door reliably
• Replaces a cracked, loose, or broken handle to restore normal operation
• Matches original mounting holes for a straightforward fit
• Helps prevent further damage from forcing the door if the handle has failed

• One door handle

• Basic hand tools required; do not overtighten fasteners to avoid cracking
• Disconnect power and empty door contents before starting
• Handle mounting screws or clips may be behind trim—refer to your model's service guide

Color: Black