Wmh53521hz Parts

Color: Black

This replacement door handle restores safe, reliable access to your appliance door by replacing a cracked, loose, or broken handle. Simple swap brings back a comfortable grip and normal door operation without replacing the whole door. What it does:

• Provides a secure grip for opening and closing the appliance door.
• Replaces handles that are cracked, loose, broken, or missing mounting points.
• Helps prevent further wear to the door edge and seal caused by using a damaged handle.
• Fits the OEM mounting locations for a direct replacement when the correct part number is used.

• Follow your appliance owner's manual or service guide for model-specific disassembly steps.
• Use basic hand tools; avoid overtightening fasteners to prevent cracking the handle.
• Keep small parts and fasteners organized during installation and verify fit before final tightening.

This thermistor is a fridge temperature sensor that monitors internal air temperature so the control board can regulate cooling. Replacing a faulty thermistor restores accurate temperature readings and more consistent refrigerator performance. What it does:

• Detects interior temperature and sends readings to the control board
• Helps the compressor and fans cycle correctly to maintain set temperatures
• Common symptom: erratic or incorrect temperature inside the refrigerator
• Common symptom: refrigerator runs constantly or cooling is inconsistent
• Common symptom: temperature-related error codes or temperature alarm messages

• Disconnect power to the appliance before starting any repair
• Handle the sensor and wiring harness carefully to avoid damage
• Route and secure the wiring as original; ensure connectors are fully seated

Color: White

This replaceable refrigerator water filter cartridge helps restore clear, better-tasting drinking water and ice by capturing sediment and common impurities. Designed for a quick swap to keep your fridge dispensing clean water. What it does:

• Filters sediment and particulate to reduce cloudiness in water and ice
• Helps improve taste and odor commonly associated with older filters
• Restores normal water flow and delivery when a clogged filter causes slow dispensing
• Supports routine maintenance to help prevent scale and buildup in the dispenser system

• Shut off the refrigerator water supply before removal to limit spills
• Follow the refrigerator manufacturer's removal/installation motion (push, pull, twist, or bayonet style)
• Flush several full glasses of water after installation to clear air and initial carbon fines
• Check for leaks at the filter and housing after restoring the water supply; discard the old filter per local regulations

This lamp cover is the replacement lens that protects and diffuses your oven's interior light, restoring even illumination while keeping the bulb shielded from heat and food residue. It helps maintain safe, usable oven lighting. What it does:

• Protects the oven light bulb from splashes, crumbs and direct contact.
• Diffuses the bulb for more even interior illumination.
• Replaces a cracked, cloudy, melted or missing lens that can cause dim or exposed lighting.
• Fits over the lamp housing to restore the oven's normal light appearance and function.

• Disconnect power to the appliance before starting and allow the oven to cool completely.
• Handle the cover carefully—wear gloves to protect from sharp edges or broken glass.
• Remove any retaining screws or clips, swap the old cover for the new one, then secure the retainer.
• After installation, restore power and replace the bulb if issues persist.

The Vent Fan Motor is an OEM replacement part for Whirlpool microwaves. It is responsible for removing steam, smoke, and odors from the microwave during cooking.

A bad vent fan motor can occur due to regular wear and tear, electrical issues, or motor failure. If you notice problems such as the vent fan not operating or making unusual noises, it may indicate a problem with the motor.

Symptoms of a bad vent fan motor include:

• Vent fan not turning on or functioning properly
• Unusual noises or vibrations coming from the vent area
• Insufficient ventilation and removal of steam or odors  

Replace your faulty vent fan motor with this genuine OEM part to restore your microwave. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This support is a replacement bracket that secures and stabilizes internal appliance components to restore alignment and reduce movement. It helps correct sagging or loose assemblies for safer, quieter operation. What it does:

• Holds and supports internal assemblies or panels to maintain proper alignment
• Replaces cracked, bent, or broken supports that cause sagging or misalignment
• Reduces vibration and rattling by securing loose components
• Helps restore proper fit and function of the affected area

• Disconnect power (and gas/water if applicable) before beginning any service
• Basic hand tools are typically required; keep fasteners from the original part for re-use if undamaged
• Handle sharp sheet-metal edges carefully and wear protective gloves/eye protection

This fan wheel spins inside the appliance to move air through the system, restoring proper airflow for heating and cooling. It replaces a cracked, worn, or unbalanced wheel to reduce noise and improve performance. What it does:

• Circulates air through the appliance to support heating, cooling, or ventilation
• Helps maintain consistent temperatures and prevents motor overload from restricted airflow
• Reduces rattling or grinding noise caused by a warped or broken wheel
• Restores proper airflow when the original wheel is damaged or missing

• One fan wheel

• Disconnect power to the appliance before starting any repair
• Access may require removing an access panel or cabinet components; follow the manufacturer's service instructions
• Inspect the blower housing and mounting for damage; replace any damaged clips or fasteners
• Ensure the wheel spins freely and is seated correctly on the motor shaft before reassembly

Color: Stainless
This Door is an OEM part for Whirlpool Microwaves. It provides a secure closure and safety while the microwave is in operation. Physical damage or wear can affect its functionality and safety.

What Causes a Bad Microwave Door:
Physical impacts, warping, or damage to the door seals can compromise safety and performance.

Symptoms of a Bad Microwave Door:

• Visible damage or warping on the door
• Inability to close or seal properly
• Safety issues such as microwave not starting due to an open door

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This air deflector redirects airflow inside the appliance to help maintain proper circulation and protect components from direct airflow. Replacing a damaged deflector restores intended air paths and can reduce uneven temperature or noise. What it does

• Guides air where the manufacturer intended to ensure even circulation.
• Protects nearby components from direct airflow and wear.
• Helps reduce symptoms like uneven cooling/heating or unusual airflow noise.
• Works as a passive airflow-management part — no electrical connection.

• Disconnect power to the appliance before starting any repair.
• Handle the deflector carefully to avoid cracking plastic tabs during removal or installation.
• Installation typically requires basic hand tools; for exact steps.

This thermostat limits temperature to protect the appliance from overheating and helps maintain safe heating performance. Replace a failed thermostat to restore proper temperature control and reduce overheating risk. What it does:

• Monitors temperature and interrupts power when preset limit is reached
• Prevents overheating of the heating circuit or components
• Commonly used when unit won't heat correctly or heats intermittently
• Works as a safety/limit device in the appliance's temperature control system

• Disconnect power before servicing to avoid shock or injury
• Replace only with the exact part number and correct orientation and connector fit
• Inspect wiring and terminal condition; secure all connections after install

Color: Black

This Inlet Cover shields and seals the appliance's inlet opening to maintain proper flow and keep debris out. Replacing a cracked or missing cover helps prevent leaks, rattles, and performance issues for reliable day-to-day operation. What it does

• Covers and protects the inlet passage so air or water flows correctly
• Helps keep debris out of the system and supports proper sealing
• Reduces the chance of leaks, drips, or vibration noise
• Common symptoms: visible damage or missing cover, leaks near the inlet area, unusual noise, reduced performance

• 1 inlet cover

• Disconnect power; shut off water supply if applicable
• Access the inlet area and remove any screws/clips holding the old cover
• Transfer any reusable gasket or hardware and orient the new cover correctly
• Tighten fasteners evenly; restore power/water and check for proper operation and leaks

This support is a replacement mounting bracket that helps secure internal components and keeps assemblies aligned for proper operation. Installing a new support can reduce movement, rattling, or misalignment of the attached parts. What it does:

• Holds and stabilizes a component or assembly inside the appliance
• Prevents excess movement that can cause vibration or noise
• Keeps parts aligned to ensure smooth mechanical operation
• Helps maintain proper spacing between connected parts to avoid wear

• Disconnect power (and water, if applicable) before beginning any repair
• Use appropriate hand tools; avoid overtightening mounting screws
• Wear safety gloves and eye protection; handle sharp sheet-metal edges with care