Wmh73521c5 Parts

Color: Black

This block-style fuse holder secures and connects the appliance fuse to the wiring harness, restoring a safe electrical connection and thermal protection. Use it when the original fuse block is cracked, corroded, or no longer holding the fuse securely. What it does:

• Holds and connects the appliance fuse to the wiring harness so the thermal/overload fuse can function.
• Restores reliable electrical contact when the original block is cracked, melted, or corroded.
• Addresses symptoms such as intermittent power, no heat, or appliance not starting when caused by a bad fuse connection.
• Works with the existing fuse and wiring—does not replace the fuse itself.

• Disconnect power to the appliance before inspecting or replacing this part.
• Replace any damaged wiring, connectors, or insulation found during replacement; do not cut corners or bypass thermal safety devices.

Color: Chrome (Qty of 1)

This lamp cover is the replacement lens that protects and diffuses your oven's interior light, restoring even illumination while keeping the bulb shielded from heat and food residue. It helps maintain safe, usable oven lighting. What it does:

• Protects the oven light bulb from splashes, crumbs and direct contact.
• Diffuses the bulb for more even interior illumination.
• Replaces a cracked, cloudy, melted or missing lens that can cause dim or exposed lighting.
• Fits over the lamp housing to restore the oven's normal light appearance and function.

• Disconnect power to the appliance before starting and allow the oven to cool completely.
• Handle the cover carefully—wear gloves to protect from sharp edges or broken glass.
• Remove any retaining screws or clips, swap the old cover for the new one, then secure the retainer.
• After installation, restore power and replace the bulb if issues persist.

This thermistor is a fridge temperature sensor that monitors internal air temperature so the control board can regulate cooling. Replacing a faulty thermistor restores accurate temperature readings and more consistent refrigerator performance. What it does:

• Detects interior temperature and sends readings to the control board
• Helps the compressor and fans cycle correctly to maintain set temperatures
• Common symptom: erratic or incorrect temperature inside the refrigerator
• Common symptom: refrigerator runs constantly or cooling is inconsistent
• Common symptom: temperature-related error codes or temperature alarm messages

• Disconnect power to the appliance before starting any repair
• Handle the sensor and wiring harness carefully to avoid damage
• Route and secure the wiring as original; ensure connectors are fully seated

The Motor-Fan is an OEM part for Whirlpool ranges. This motor works with the lower convection fan to circulate heat underneath and throughout the oven cavity during the baking and broiling functions.  

Causes of a bad motor can include normal wear over several years of continuous usage. Issues may also stem from dust or grease buildup inhibiting free fan rotation.

Symptoms of a bad motor-fan include:

• The lower convection fan not spinning or circulating air 
• Improper or uneven cooking temperatures inside the oven
• Slower cook times compared to when new
• Possible smoke or burning of foods from poor air flow

This essential Whirlpool replacement is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore oven models.

This replaceable refrigerator water filter cartridge helps restore clear, better-tasting drinking water and ice by capturing sediment and common impurities. Designed for a quick swap to keep your fridge dispensing clean water. What it does:

• Filters sediment and particulate to reduce cloudiness in water and ice
• Helps improve taste and odor commonly associated with older filters
• Restores normal water flow and delivery when a clogged filter causes slow dispensing
• Supports routine maintenance to help prevent scale and buildup in the dispenser system

• Shut off the refrigerator water supply before removal to limit spills
• Follow the refrigerator manufacturer's removal/installation motion (push, pull, twist, or bayonet style)
• Flush several full glasses of water after installation to clear air and initial carbon fines
• Check for leaks at the filter and housing after restoring the water supply; discard the old filter per local regulations

The High Voltage Capacitor is an OEM part for Whirlpool microwaves. This component allows the microwave to store and discharge high voltage current to the magnetron tube for generating microwave energy. 

Symptoms of a faulty capacitor include:

• Slow or incomplete cooking even on high power levels
• Inconsistent or uneven heating inside the microwave cavity  
• Sparking, burning or smoke emitting from inside components
• An appliance that fails to start or runs intermittently

Causes can be regular wear and tear over many years of use. The capacitor endures heat stresses each time the magnetron operates.

 This part is also compatible with select Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore brand microwaves.

This mounting bracket secures internal components to the appliance cabinet, restoring proper alignment and stability. It replaces worn or damaged brackets to reduce vibration and rattling and help fitted panels sit flush. What it does:

• Secures panels or components to the cabinet framework to maintain alignment
• Reduces vibration and noise caused by loose or broken supports
• Helps prevent further wear on adjacent parts by restoring proper fit
• Addresses symptoms such as loose panels, rattling during operation, or misaligned parts

• Disconnect power and, if applicable, water before starting any repair
• Use basic hand tools; hold components in place while installing new bracket
• Tighten fasteners firmly but avoid over-torquing to prevent striping

Color: Black

This replacement lower cabinet base restores the appliance's bottom support and underside protection to help maintain stability and keep internal components shielded from debris. Fits the factory location under the appliance cabinet. What it does

• Provides structural support for the appliance's lower section to reduce wobble and sag.
• Protects motors, wiring and other components from dirt, moisture and impact at the underside.
• Helps stop or reduce unusual rattling or scraping caused by a damaged or missing base.
• Restores proper clearance and mounting for kickplates and toe panels.

• Disconnect power and, if applicable, gas and water before starting any work.
• Use two people to support the appliance when accessing or replacing the base.
• Keep all factory fasteners; re-use or replace with equivalent OEM screws as required.

This replacement grill vent restores the front vent trim on compatible ranges and ovens, helping direct airflow and finishing the appliance's front appearance. It's a direct-fit exterior trim piece that keeps the vent area looking and functioning correctly. What it does:

• Replaces worn, cracked, or discolored front vent trim to restore a clean appearance
• Directs exhaust and airflow from the oven/range vent area as intended
• Helps keep debris out of the vent opening and maintains proper vent clearance
• Matches original fit and mounting locations for straightforward replacement

• One grill vent (front vent trim) as shown

• Remove power to the appliance before beginning any work to prevent electrical shock
• Basic hand tools are usually all that's needed; follow OEM disassembly order for surrounding panels
• Handle trim carefully to avoid scratching the finish; snug fasteners without over-tightening

This piston assembly restores the moving piston used in the appliance's fluid/valve system to help recover proper dispensing and motion. It replaces a worn or damaged piston so the affected function can operate as intended. What it does:

• Replaces the piston that moves inside a valve or dispenser to control fluid or airflow
• Restores proper actuation and sealing that can prevent drips or improper dispensing
• Commonly installed when symptoms include poor dispensing, leaks near the valve area, sticking motion, or unusual noises during operation
• Works as a direct-fit replacement where this OEM piston assembly is specified

• One piston assembly as shown

• Disconnect power (and water supply or gas, if applicable) before starting any repair
• Follow the appliance service manual and use appropriate tools; keep small fasteners and seals organized
• Inspect sealing surfaces and O-rings; replace damaged seals to ensure a leak-free install
• Test the appliance after installation to confirm correct operation

This oven temperature sensor senses cooking cavity heat and sends accurate temperature readings to the range control so your oven can reach and maintain set cooking temperatures. Replaces a failed or intermittent sensor for consistent performance. What it does:

• Detects oven cavity temperature and relays readings to the controller
• Helps the oven maintain set temperatures for proper cooking and baking
• Common fix when oven won't heat correctly or displays inaccurate temps

• One oven temperature sensor (W10557536)

• Disconnect power to the appliance before servicing to avoid shock
• Handle the sensor and connector carefully; avoid bending or crimping the probe
• Verify connector type and routing match your model before final assembly

This support is a replacement bracket that secures and stabilizes internal appliance components to restore alignment and reduce movement. It helps correct sagging or loose assemblies for safer, quieter operation. What it does:

• Holds and supports internal assemblies or panels to maintain proper alignment
• Replaces cracked, bent, or broken supports that cause sagging or misalignment
• Reduces vibration and rattling by securing loose components
• Helps restore proper fit and function of the affected area

• Disconnect power (and gas/water if applicable) before beginning any service
• Basic hand tools are typically required; keep fasteners from the original part for re-use if undamaged
• Handle sharp sheet-metal edges carefully and wear protective gloves/eye protection