Wrf560sey Parts

This cup fill spout directs the dispenser's water stream cleanly into a cup. If the spout is cracked, clogged, or warped, it can cause splashing or persistent drips—replacing it restores a steady, controlled flow.

• Funnels water from the dispenser outlet for a smooth, targeted stream
• Helps reduce splashing and water running down the door
• Can resolve drips after dispensing, erratic spray, or a damaged/missing spout
• Visible cracks, mineral buildup, or deformation are common failure signs

• Unplug the appliance and turn off the water supply
• Open the dispenser area and release the spout from its locking tabs or clips
• Seat the new spout fully; transfer any seals from the old part if applicable
• Restore water and power, then test for proper flow and leaks

The Freezer Drawer Gear Clip is an OEM part for Whirlpool refrigerators. It is designed to secure the gear mechanism that allows the freezer drawer to slide in and out smoothly. This clip ensures that the drawer operates efficiently, providing easy access to the freezer compartment.

Causes of a bad gear clip can include wear and tear from regular use, damage due to overloading the drawer, or breakage from accidental impact. A faulty gear clip can impair the drawer’s movement and make it difficult to open or close properly.

Symptoms of a bad refrigerator freezer drawer gear clip include:

• The freezer drawer not sliding smoothly
• Difficulty in opening or closing the drawer
• The drawer coming off its track
•  Unusual noises during the drawer’s operation

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Color: Stainless

The Door Handle is an OEM part for Whirlpool refrigerators. It is a component that facilitates easy access to the fresh food and freezer compartments. The handle interfaces directly with users to open and close refrigerator doors.

Causes of a bad door handle can include wear and tear over time from repeated use, or damage such as cracks, chips or breaks from accidental impact. Temperature fluctuations from frequent door openings can also cause handles to warp or fail prematurely.

Symptoms of a bad refrigerator door handle include:

• Difficulty opening or closing the refrigerator door
• The door not latching securely
• Internal components like springs or cables becoming loose or worn

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Door Hinge is an OEM component specifically designed for Whirlpool refrigerators. As an integral part of the refrigerator door, it provides a rotating mechanism that allows for smooth opening and closing access to the fresh food and freezer compartments. 

The hinge contains precisely engineered components including springs, brass pins, and roller bearings that ensure quiet, balanced movement. It helps the door hang securely while accommodating a wide range of opening angles.

Symptoms of a bad hinge include: 

• Noisy squeaking or grinding noises coming from hinges
• Difficulty in opening or closing refrigerator doors  
• Doors that do not stay in desired positions 
• Visual cracks, chips, or other exterior damage to hinges

This Whirlpool OEM hinge replacement will restore reliable door operation. It is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.
 

Color: Grey / Right Hand

This rail is the replacement oven door rail that supports and guides the oven door for smooth opening and closing. Replaces worn or damaged rails to restore proper door alignment and operation. What it does:

• Provides structural support for the oven door and helps keep it aligned during use
• Guides the door on its track for smooth opening and closing motion
• Helps prevent uneven seating or gaps that can affect oven sealing and performance
• Reduces door sag, rubbing, or noisy operation when the original rail is worn or bent

• One replacement oven door rail

• For safety, disconnect power to the appliance before beginning any repair
• Basic hand tools may be required; follow the appliance manufacturer's service instructions
• Handle sharp edges carefully and avoid forcing components
• Verify the part number and fit for your specific appliance model before installation

This support is a replacement mounting support that helps secure internal components and keeps assemblies aligned for reliable operation. Replaces a worn or damaged support to reduce noise and prevent misalignment. What it does:

• Provides structural support for the appliance's internal assembly to maintain correct alignment
• Helps stop rubbing, rattling, or vibration caused by a loose or broken support
• Restores proper spacing so connected parts operate smoothly
• Useful when visible cracks, deformation, or mounting failures are present

• One mounting support as shown

• Disconnect power (and water, if applicable) before starting any repair
• Inspect surrounding fasteners and gaskets; replace any damaged hardware
• Use basic hand tools; follow OEM diagram for proper orientation and torque

The lower part of this container is part number W11106787.

Color: White 

Note: RH door, includes door gasket

This replacement pad dampens vibration and cushions the appliance to reduce noise and wear. It's a simple, durable rubber/foam part that helps stabilize components and protect surfaces during operation. What it does:

• Absorbs vibration and reduces operational noise
• Prevents metal-to-metal contact and limits wear on mounting points
• Helps keep the appliance stable during cycles or operation
• Commonly used where a small cushion or isolator is needed to protect surfaces

• One replacement pad

• Disconnect power (and water if applicable) before servicing the appliance
• Access and remove the old pad per your model's service instructions; replace with the new pad in the same orientation
• Use hand tools only; avoid damaging surrounding components

This grille enclosure replaces a damaged lower front grille to restore the appliance's appearance and protect internal components. It provides a secure cover that helps direct airflow and prevents debris from entering the cabinet. What it does:

• Covers and protects lower front components from dirt, dust and accidental contact
• Helps direct airflow around vents and intake areas for proper operation
• Restores a finished, gap-free appearance when the original grille is cracked or broken
• Reduces rattling caused by loose or damaged grille pieces

• One lower front grille enclosure

• Disconnect power before starting any repair to avoid electrical shock
• Remove nearby panels or kickplate screws/clips as needed for access
• Align tabs and secure with the factory screws or clips; do not force or bend mounting tabs

This cover-unit is the outer housing cover that protects internal components and provides a finished appearance. It keeps wiring and mechanisms enclosed and helps maintain safe, reliable operation. What it does:

• Shields internal parts from dust, debris and accidental contact
• Helps maintain proper airflow and component spacing
• Restores the appliance's exterior appearance after panel damage or disassembly
• Reduces the risk of snagging or exposed wiring near service areas

• Disconnect power before servicing to avoid electrical shock
• Use basic hand tools; follow for correct removal and reinstallation sequence
• Inspect mounting clips and fasteners; replace any broken hardware for a secure fit
• Handle carefully to avoid scratching the finish or bending mounting tabs

This humidity control graphic is the replacement label for the crisper drawer humidity slider, restoring clear markings so you can set and read the vent position easily. It helps make humidity settings visible and intuitive. What it does:

• Replaces worn, faded or missing humidity-slider markings on the crisper vent
• Restores clear low/med/high or open/closed indicators for accurate vent position reading
• Helps prevent confusion when adjusting drawer humidity for produce storage
• Matches OEM appearance and placement to maintain original look

• One humidity control graphic/label for the crisper humidity slider

• Disconnect power to the appliance before accessing interior components when required
• Remove the crisper drawer and clean the mounting area; peel-and-stick or snap-in fit may be adhesive-backed
• Align the graphic carefully before attaching to avoid rework; press firmly to ensure full adhesion

This filter cover secures the appliance's filter element, keeping debris out of the sump and maintaining proper water flow for efficient cleaning. Replaces a worn or cracked cover to help restore normal filter function and reduce recurring clogs. What it does:

• Secures and protects the filter assembly from food particles and large debris
• Helps maintain correct water circulation through the filter area
• Prevents loose debris from entering the pump or spray system
• Can resolve symptoms like visible cover damage, persistent clogs, or debris in the sump

• One filter cover

• Turn off power to the appliance before accessing internal components
• Remove the old cover, clean the filter area, and snap or fasten the new cover into place per manufacturer guidance
• Do not force the cover; verify proper seating to avoid leaks or damage