Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
This bale strap is a direct-replacement part that helps secure the dryer's latch/bale assembly so the door closes and stays closed during operation. Replacing a worn or broken strap restores reliable door engagement and safer drying cycles. What it does:
Size: 1/4 lb.
Putty sealer adhesive for refrigerators and freezers. Seals joints, gaps, and connections. Replace when old sealant is cracked, dried out, or missing.
The installation of the new condenser motor was as the video described; there were no surprises. I noted the difference in operation immediately, the fan was moving at a higher rate of speed in a smoother motion. The new motor had far less shaft end play and seems to move more air across the condenser coil than the original motor. All in all, this was a relatively easy repair that solved a real refrigerator performance problem; the unit now cycles less often and generates less compressor heat. Read more
Size: 1/4 inch.
Insulation foam panel for refrigerator. Installs inside cabinet walls to maintain temperature efficiency. Replace if cracked, compressed, or missing.
Refrigerator not cooling or running constantly? This sealed compressor circulates refrigerant through the cooling system. Professional installation recommended.
The Evaporator Fan Grommet is an OEM component specifically designed for Whirlpool refrigerators. Found along the rear wall of the fridge compartment where the evaporator fan motor is located, the evaporator fan grommet serves an important sealing function.
Constructed of flexible rubber, the evaporator fan grommet forms a tight, airtight seal around the electrical wiring harness and ventilation ductwork attached to the rear-mounted evaporator fan motor. This helps prevent the escape of cold air from the refrigeration system and allows the evaporator fan motor to work efficiently.
Causes of a bad evaporator fan grommet include cracks or splits from vibration stress over years of use. Dried-out seals no longer achieving a tight fit is also possible.
Symptoms of a bad evaporator fan grommet include:
Compatible with Whirlpool, KitchenAid, Jenn-Air, and select Kenmore side-by-side models.
I called Sears to schedule a service call for Sat. Morning. At 11:00 a.m. A service man called and said he was going to do the service call (the original tech was going to be delayed), so he had been scheduled instead. He had another call before he could get to me (an hour drive one way And he would get lunch and see me later. I asked him about how long it might take, he said they do not charge by the hour. He said he couldn't remember for sure, but it was between $200.00 and $250.00, but... Read more
First, I had to replace a cracked roller so I could roll the frig out. I did this by tilting it slightly and shoving a shim underneath. I had to use two shims to get enough clearance for the wheel. I unscrewed the old wheel, screwed in the new one pretty easy, removed the shims and rolled it out. Then I unplugged the frig from the power socket, removed 6 screws from the back panel, and pulled out the old drain kit, which had become clogged with dirt and dust. I put in the new drain kit,... Read more
This refrigerator ice level control board monitors ice production and storage levels in your automatic ice maker. It signals when to stop making ice when the bin is full and resume production when ice is needed. Replace this control board when your ice maker overproduces ice, fails to stop when full, or doesn't restart ice production when the bin empties.
Bought new optic control boards, both the emitter and the receiver. The repair process was so simple. The KitchenAid repair tech came out to diagnose our issue. He was only going to come back and install a new emitter. They wanted a lot of money to do the repair. They were going to charge us $257 just for the part (emitter board). We bought both boards for $300 from AppliancePartsPros. We decided to replace both boards, because if one went bad the other might not be far behind. Read more
Replace your refrigerator's LED light module when lights flicker, dim, or stop working. Restores bright interior lighting. Confirm fit with your model.
The Heater is an OEM part for Whirlpool refrigerators. It is a thin heating element located behind the cover for the ice compartment inside the fresh food section that functions to prevent condensation from accumulating. Causes of a bad heater can include failure of the heating element over many cycles of use, cracks or breaks due to normal wear and tear or repeated door opening/closing stress. Symptoms of a bad heater include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Replacement door shelf bin that mounts inside the refrigerator door to organize bottles, jars, and condiments. Replace your cracked, broken, or loose bin.
Replace the water valve Read more
Seals your refrigerator's ice compartment door to maintain proper temperatures and prevent frost buildup. Replace if ice quality declines or moisture appears.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.