Wrf757sh Parts

This decorative trim piece replaces a damaged or worn exterior trim to restore the appliance's finished appearance and fit. It provides a clean edge and helps cover mounting gaps around the control area. What it does:

• Covers and protects the appliance edge where trim is installed, improving appearance
• Hides gaps between panels and the control area for a finished look
• Replaces cracked, chipped, bent, or missing trim that affects aesthetics
• Prevents sharp or exposed edges that can catch clothing or skin

• Disconnect power (unplug appliance or shut off breaker) before starting any repair
• Typical installation requires removing adjacent screws or clips; have a screwdriver set handy
• Handle edges carefully; trim and surrounding metal can be sharp

Color: Black Stainless

This small crisper pan is the replacement plastic tray that sits under the crisper drawer to support produce and catch spills, helping keep the refrigerator interior clean and organized. What it does:

• Supports the crisper drawer and helps keep stored produce level
• Catches moisture and small leaks to protect the refrigerator floor
• Helps contain spills for easier cleanup and prevents mess spreading
• Restores proper fit and function when the original pan is cracked or warped

• Remove all food from the crisper area before replacing the pan
• Slide the crisper drawer out to access the pan; lift out the old pan and set the new pan into the same position
• Inspect surrounding rails and seals for damage while installing
• No special tools required; handle plastic parts gently to avoid cracking

This door bumper cushions and stabilizes the appliance door to reduce noise and wear from slamming. It helps the door close smoothly and maintain proper alignment for reliable operation. What it does:

• Absorbs impact to prevent metal-on-metal contact and reduce slamming noise
• Helps the door sit evenly to improve latch engagement and sealing
• Reduces vibration and rattling during operation
• Simple replacement that restores proper door feel and alignment

• Disconnect power to the appliance before starting any repair
• Access the bumper by opening the door; some models may require removing the door or inner panel
• Press or snap the bumper into the locating hole or slot until secure; replace any retaining clips if present

The Drain Funnel is an OEM part for Whirlpool French door refrigerators. It serves as the sloped plastic strainer that guides water from the evaporator coils s it into the drip pan below. 

Causes of a faulty Drain Funnel include cracks or punctures developing from continuous use transferring water weight. Mineral deposits or food particles that gradually collect on funnel surfaces could restrict proper drainage as well over time.

Symptoms involve: 

• Puddling or spilled water inside refrigerator interiors
• Uncontrolled leaks potentially damaging other components  
• Restricted airflow if funnel clogs from sediment buildup
• Musty odors developing without efficient drainage management

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement door gasket creates a tight seal to help prevent leaks and maintain proper appliance performance. It restores the sealing surface around the door so the appliance can operate as intended. What it does:

• Seals the door opening to help prevent water or air from escaping
• Helps maintain consistent internal temperature and cleaning performance
• Reduces leaks and pooling beneath the appliance
• Can eliminate drafts, rattling, or improper door closure related to a worn seal

• One gasket

• Designed for direct replacement; inspect mounting channel for damage before installing
• Clean the sealing surface and remove old adhesive or debris for a proper fit
• Press gasket fully into the channel and verify an even seal around the entire door
• Disconnect power and water before servicing

This replacement OEM part is a control board for refrigerators. The control board controls the digital display of the refrigerator. If the digital display is no longer visible and the buttons are no longer operating properly, it might be time to replace the control board. Luckily replacing the control board on a refrigerator with a digital display is a relatively simple process. To begin, start by unplugging the refrigerator. Then remove the display board by popping it out of the mounting brackets that attach to the refrigerator. Once the dispenser and display have been removed, access the old control board. Unfasten the screws attaching it to the refrigerator and remove the wire harness along with any individual wires. Be sure to take note of the orientation of the wires. Re-insert them into the correct terminals on the new board and reattach the new board to the refrigerator. reinstall the dispenser and display board and restore power to the refrigerator.This genuine replacement part is compatible with Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Sears/Kenmore brand refrigerators.

A replacement machine screw with 8-32 threads used to secure panels and components on compatible Whirlpool appliances. Installs quickly to restore proper fit and stop rattling or loose parts. What it does:

• Secures panels, trim, brackets or components that use 8-32 machine-thread fasteners
• Restores proper alignment and prevents vibration-related noise
• Replaces missing, stripped, or damaged screws that allow parts to come loose
• Works where a standard 8-32 machine screw is specified by the manufacturer

• Disconnect power and/or gas before servicing the appliance to reduce shock or injury risk
• Use the proper screwdriver or nut driver for the screw head to avoid stripping
• Thread gently and stop when snug; do not overtighten to prevent stripping or damage
• If threads are damaged, replace with the correct-size screw rather than forcing it

This condenser fan shroud secures and directs airflow around the condenser fan to help efficient heat dissipation. Replaces a damaged or missing shroud to restore proper fan positioning and airflow around the condenser coil. What it does:

• Holds the condenser fan motor and blade in the correct position relative to the condenser coil
• Channels airflow for more effective heat transfer from the condenser
• Prevents the fan blade from contacting nearby components
• Can reduce noisy operation caused by a loose or damaged shroud

• Intended to be installed by someone comfortable with basic appliance repair
• Disconnect power to the appliance before accessing the condenser area
• Inspect surrounding components (fan blade, motor mounts, fasteners) and replace any damaged parts
• Use the OEM mounting hardware and torque to manufacturer recommendations when reassembling

This left-side stop pan is a replacement mounting/support piece that helps hold and align the appliance's lower assembly while directing any incidental moisture away from internal components. It restores fit and quiet operation after damage or wear. What it does:

• Replaces a damaged or missing left-side stop pan that can allow panels to rub or sit unevenly
• Helps maintain proper alignment of the lower/front assembly and related trim
• Reduces rattling or vibration caused by loose or broken support parts
• Helps channel incidental drips away from sensitive components

• Disconnect power (and water, if applicable) before beginning any repair
• Removal of the front or lower access panel is commonly required; keep fasteners for reuse unless damaged
• Inspect adjacent clips and mounting tabs; replace if worn to ensure a secure fit

Color: Grey

This lower pan assembly is the replacement drip tray that sits under the appliance to collect and channel moisture and condensate away from internal components, helping prevent water damage and maintain proper drainage. What it does:

• Catches and channels water from defrosting or condensation to the drain system
• Helps prevent water pooling beneath the unit that can cause leaks or floor damage
• Supports and protects lower internal components from moisture exposure
• Restores proper drainage when a cracked or warped pan causes leaks or overflow

• Disconnect power to the appliance before starting any repair
• Remove lower access panels and any stored water before replacing the pan
• Inspect surrounding seals, fasteners, and drain lines for damage and replace as needed
• Handle carefully to avoid damage to tabs or mounting surfaces; follow OEM instructions for proper fit