Wrf989sdam Parts

This slide is the replacement rack glide that helps a rack roll smoothly in and out of the appliance, restoring proper rack movement and preventing scraping or sticking during use. Fits where the factory rack glide has worn or broken. What it does

• Provides a smooth track for a rack to slide in and out without binding
• Replaces cracked, worn or missing glide that causes rubbing or uneven movement
• Helps keep the rack properly aligned during loading and unloading
• Reduces noise and drag from a damaged or missing glide

• One replacement slide/rack glide

• Remove power supply or disconnect appliance before starting any repair
• Access the glide by sliding the rack out and removing any retainer clips or screws as required
• Snap or screw the replacement slide into place and verify smooth rack movement before restoring power
• If other rack parts are damaged, replace them to ensure proper function

This right-side pantry sideplate restores the interior trim on compatible refrigerators, keeping the pantry compartment sealed and looking finished. Durable replacement to help support door components and improve appearance. What it does:

• Replaces a cracked, warped, or missing right pantry sideplate
• Restores the interior trim that helps hold pantry shelves and seals in place
• Prevents edge damage and covers mounting points for a clean look
• Matches OEM fit for proper alignment and function

• Install with basic hand tools; align before tightening fasteners
• Handle carefully to avoid scratching finished surfaces
• Disconnect power only if work requires removing electrical components nearby
• If mounting hardware is damaged or missing, replace hardware separately

This front grille replaces the lower decorative and airflow cover on compatible refrigerators. It restores the appliance's finished look and helps direct airflow while protecting internal components at the base. What it does:

• Covers and protects the refrigerator's lower front area from dust, debris and accidental contact
• Directs airflow to ventilation openings along the base for proper condenser airflow
• Replaces cracked, broken or faded toe-kick pieces that affect appearance
• Helps maintain a finished, flush look at the appliance front

• Turn off power to the appliance before starting any repair to reduce risk of shock
• Typically snaps or screws into place behind the toe-kick; remove lower trim or fasteners to access
• Use common hand tools; avoid forcing clips to prevent breakage

This black plastic corner cover replaces a damaged or missing exterior trim piece to restore the appliance's finished appearance and protect internal edges from dirt and wear. Fits the factory location and matches original styling. What it does:

• Covers and protects the appliance corner or trim area from chips, scuffs, and debris.
• Restores a clean, finished look where the original corner piece is cracked, broken, or missing.
• Helps keep moisture and grime from reaching internal seams at the corner.
• Matches the original color and shape to maintain the appliance's aesthetic.

• Install with the appliance powered off and unplugged for safety if cover removal exposes wiring.
• Remove any broken fragments and clean the mounting area before installing the new cover.
• May snap or screw into place depending on model; keep fasteners from the original cover for re-use.

The Tube-Water is an OEM part for Whirlpool refrigerators. It is a flexible tubing component responsible for transporting water from the main household supply line to the icemaker within the freezer.

Causes of issues with the water tube can include mineral buildup restricting flow over time, cracks or kinks developing from repeated bending during installation/removal, or accidental punctures and tears. 

Symptoms of a bad water tube include:

• Slow or absent filling of the icemaker basket
• Leaks or moisture in unintended areas near connections
• Noticeable bulges, weak spots, or restricted flexibility in the tubing

This OEM replacement is also compatible with models from Maytag, KitchenAid, Jenn-Air and more. 

This water tube directs water from the household supply to the appliance dispenser or ice/water system, helping ensure a steady flow for dispensing and filling. It's a direct-fit replacement designed to restore proper water routing. What it does:

• Channels water from the inlet to the dispenser, ice maker or fill components
• Helps stop leaks and flow interruptions caused by cracked, clogged or damaged tubing
• Restores proper water delivery for consistent dispensing and ice production
• Works as the fluid pathway between supply valve and internal components

• Disconnect power and shut off the water supply before starting any work
• Handle and route the tube carefully to avoid kinks or sharp bends that can restrict flow
• Use proper clamps or fittings and tighten to manufacturer torque recommendations

This heater fill tube directs water to the appliance's heating area to enable proper operation and efficient cycles. Replacing a damaged or clogged tube restores correct water routing and helps prevent leaks or heating issues. What it does:

• Routes incoming water to the heater/float area so the appliance can heat and process water as intended
• Prevents leaks by maintaining a secure, routed path for water flow
• Helps avoid poor heating performance caused by blockages or cracks in the tube
• Commonly replaced for visible cracks, splits, or when water sprays or leaks near the heater area

• One heater fill tube

• Disconnect power and shut off water supply before beginning any repair
• Inspect surrounding hoses, clamps, and fittings; replace any damaged hardware for a reliable seal
• Use basic hand tools; follow the appliance service manual for disassembly and routing details

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This air tower directs cooled air from the evaporator into the fresh-food compartment to help maintain even temperatures and consistent airflow. It's a molded plastic duct that replaces a cracked, warped, or missing tower. What it does:

• Channels cold air from the evaporator/air plenum into the refrigerator fresh-food area
• Restores balanced airflow to reduce warm spots and uneven cooling
• Replaces broken or warped ducting that can cause rattling or poor circulation
• Helps maintain designed airflow paths for proper compartment performance

• One air tower (single duct assembly)

• Disconnect power to the appliance before beginning work
• Remove shelves and any trim blocking access; handle plastic parts carefully to avoid damage
• Seat tabs or clips fully during reassembly to ensure an airtight fit

The Dishwasher Dispenser is an OEM part compatible with Whirlpool dishwashers. Located inside the dishwasher door, it is responsible for dispensing detergent at the proper time during cycle.

Causes of a bad dispenser can include leakage, blockages in the dispensing mechanism, door or latch issues that prevent proper opening.

Symptoms of a bad dispenser include:

• Improper or incomplete dispensing of detergent 
• Dishes not getting fully clean due to insufficient detergent 
• Leakage from the dispenser door or tub area
• Dispenser door remaining open or closed during cycles

This genuine Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore models as well.

Color: Black