Wrs32fdam04 Parts

A roll pin (spring pin) that secures rotating or sliding components by fitting into matched holes to hold shafts, levers, or brackets in place. Replaces a worn or damaged pin to restore proper mechanical engagement. What it does:

• Holds shafts, levers or hinges in position by expanding into drilled holes for a snug, vibration-resistant fit
• Keeps pulleys, rollers, or linkages from moving out of alignment or sliding off their shafts
• Common symptom: loose or wobbling pulley, lever, or shaft where the retaining pin is worn or broken
• Common symptom: noisy or intermittent operation caused by a pin that no longer secures moving parts

• Inspect mating holes and shaft for wear; replace pin with correct size to ensure secure fit
• Use appropriate pliers or a pin punch and hammer to drive the pin in or out; support the assembly to avoid damage
• Wear eye protection when installing or removing roll pins—pins can snap or fly out under force
• If pin is difficult to remove or install, consider using penetrating oil or heating only per OEM guidance

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This replacement trim pan restores the finished edge around the appliance cabinet and helps keep the interior sealed and looking neat. It replaces a worn, cracked or missing trim to improve appearance and help maintain proper airflow. What it does:

• Covers and protects the cabinet edge where panels meet, restoring a clean trim line
• Helps maintain the intended cabinet seal and airflow path by replacing damaged trim
• Reduces gaps that can collect dirt, moisture, or debris around the cabinet perimeter
• Improves overall appearance when original trim is cracked, warped or missing

• One trim pan

• Disconnect power to the appliance before starting any repair
• Remove any nearby shelves, drawers or access panels as needed for clearance
• Typically secures with clips or screws; use appropriate screwdriver or trim tool and avoid forcing plastic tabs

A genuine replacement screw used to secure appliance panels, brackets, and components so assemblies stay aligned and stable. Installs quickly with a screwdriver or driver bit to restore proper fit and reduce rattling. What it does:

• Secures panels, trim, brackets or internal components to keep parts properly aligned
• Prevents loose or vibrating panels that can cause noise or wear
• Holds mounting points that keep doors, seals, and assemblies operating correctly
• Replaces stripped, missing, or corroded fasteners that compromise fit

• Turn off and unplug the appliance before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten until snug; avoid overtightening which can strip threads or deform parts
• Keep removed hardware organized and replace like-for-like for best fit

This genuine glass shelf provides a sturdy, easy-to-clean storage surface for your refrigerator, helping keep food organized and visible while maintaining proper airflow. Designed to fit in compatible fridge compartment shelving tracks. What it does:

• Replaces a cracked, chipped, or missing refrigerator shelf to restore usable storage space
• Provides a flat, stable surface for food containers, platters, and produce
• Tempered glass resists everyday impacts and is simple to wipe clean
• Helps maintain proper shelf spacing and airflow when installed in the correct position

• 1 glass shelf (matches listed part number)

• Handle tempered glass carefully and wear gloves to reduce cut risk
• Slide into existing shelf tracks or supports; no special tools typically required
• Verify correct shelf position and seating before loading with items
• If mounting hardware or supports are damaged, replace those parts before use

This door shelf bin is a direct-fit replacement that restores secure storage on the refrigerator door and keeps cans, bottles and other items from shifting or falling. Made to match the original fit and mounting points. What it does

• Replaces a cracked, broken or missing refrigerator door shelf so items stay supported and organized.
• Restores the original mounting and snap-in function so the bin locks into the door rails.
• Prevents stored items from falling or shifting during normal door use.
• Matches the OEM shape and capacity for proper alignment with adjacent bins and door features.

• Remove all items from the door and lift out the damaged bin before installing the replacement.
• Align the bin with the door rails and snap it into place; confirm it seats fully on both sides.
• No tools or electrical disconnection typically required.
• Wear gloves to protect hands from sharp edges on broken plastic and to avoid fingerprints on clear surfaces.

This fitting connects a flexible water or drain hose to the appliance, restoring a secure, leak-free connection. It's a small replacement part that prevents drips and keeps water flowing where it's needed. What it does:

• Joins a hose to the appliance inlet, outlet, or valve for a sealed connection
• Helps stop leaks at the hose connection point
• Restores proper water flow when a damaged or corroded fitting is replaced
• Works with the appliance hose system; commonly replaced when connections are loose or leaking

• Turn off and unplug the appliance and shut off the water supply before replacing the fitting
• Drain residual water from the hose or lines to avoid spills
• Hand-start threads, then tighten securely with appropriate tool; avoid over-tightening
• Inspect and replace any O-rings or gaskets if worn to ensure a watertight seal

This glass shelf replaces a cracked, chipped or missing interior refrigerator shelf to restore usable storage space and stable support for food containers. Tempered glass provides a flat, easy-to-clean surface for organized refrigeration. What it does

• Provides a sturdy, level surface to hold food, beverages and containers inside the refrigerator
• Replaces damaged or missing shelves that can no longer support items or create safe storage
• Helps maintain organized storage and prevents items from falling between compartments
• Compatible with standard shelf supports and rails used in top- and middle-mount refrigerator compartments

• Remove all food and containers from the shelf before removing the old glass
• Handle glass with care; wear cut-resistant gloves and safety glasses when installing
• Slide shelf into existing rails or supports until fully seated; do not force or jam
• If shelf clips or rails are damaged, replace them before installing glass to ensure safe support

This replacement ice bin stores and dispenses ice from the freezer; it restores proper ice handling and prevents jams or leaks caused by a cracked or worn container. Fits compatible Whirlpool refrigerators. What it does:

• Holds and funnels ice from the ice maker to the dispenser or door bin
• Prevents ice from spilling into the freezer compartment
• Reduces ice jams and helps ensure smooth dispensing
• Restores a damaged, cracked, or warped bin that causes leaks or poor fit

• Disconnect power to the refrigerator before removing or installing the bin
• Remove stored ice before handling; install carefully to avoid cracking
• Slide into the bin compartment until it seats securely; no special tools typically required
• Check ice maker alignment and dispenser components

This is a replacement mounting screw used to secure appliance panels and small components. It provides a correct-fit fastener to restore secure attachment and eliminate rattles or loose parts. What it does:

• Secures trim, panels, brackets, or small assemblies to prevent movement and vibration
• Restores proper alignment when a worn or missing screw causes loose parts or noise
• Works as a direct-replacement fastener where the OEM screw specification is required

• One replacement screw

• Use the correct driver bit to avoid stripping the head; do not overtighten
• Disconnect power and follow appliance safety guidelines when accessing internal components
• If the original mounting hole or threads are damaged, repair or replace the mounting hardware before reinstalling