Wrt318fzdmo1 Parts

This replacement crisper shelf fits the fresh-food compartment to restore a stable storage surface and keep produce drawers supported and organized. Ideal when the original shelf is cracked, chipped, warped, or missing. What it does:

• Provides a flat support for crisper drawers and stored items to prevent sagging or collapse
• Replaces damaged, cracked, or broken crisper shelving
• Helps stop items from falling into the crisper area and keeps contents organized
• Matches the original white finish and 30" width for proper fit where specified

• Remove all contents from the shelf area before installing
• Lift old shelf straight up/out of the support tracks; slide new shelf into the same tracks until seated
• Handle carefully—use gloves if glass or brittle plastic is present

This wire harness connects the touch matrix/user interface to the appliance's control system, carrying power and keypad signals. Replacing a damaged harness can restore reliable button response and consistent control-panel operation.

• Links the touch matrix/user interface to the main control board
• Transmits low-voltage power and signal inputs from the keypad
• Improper routing or damaged conductors can cause intermittent inputs
• Can lead to symptoms like unresponsive buttons, erratic UI behavior, or flickering/blank panel

• Disconnect power to the appliance before servicing; shut off gas supply if applicable
• Photograph original wire routing and connector locations for reference
• Depress connector locking tabs—do not pull on wires; seat connectors fully
• Route and secure the harness away from sharp edges and heat; reuse retainers/clips

The Door Gasket is an OEM part for Whirlpool refrigerators. It provides an air-tight seal between the refrigerator door and cabinet to ensure cool air is contained within the refrigerator compartment. The gasket is made of flexible yet durable materials designed to compress and flex numerous times without degradation as the door is opened and closed on a daily basis.

Causes of a bad door gasket can include cracking, tearing or warping of the material over time and repeated use. Improper closing of the door or excessive force when opening/closing can also damage the gasket.

Symptoms of a bad door gasket include:

• Inability to maintain a consistent interior temperature
• Frost or moisture buildup around the edges of the door or along the top/sides of the refrigerator
• Warm air leaking into the refrigerator compartments
• The door not sealing tightly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This compressor grommet is the rubber isolator that cushions the refrigerator's compressor at its mounting points. Replacing a worn grommet helps quiet vibration and rattling and reduces stress on refrigerant tubing for smoother, safer operation.

• Isolates the compressor from the base to damp vibration and humming
• Helps prevent metal-to-metal contact and rattling at the mounts
• Supports proper compressor alignment to reduce stress on tubing
• Helps with symptoms like loud buzzing/rattling or cracked/flattened rubber at the compressor feet

• Unplug the appliance and remove the rear access cover to reach the compressor area
• Support the compressor while removing hardware; replace the grommet in the same orientation
• Avoid kinking or stressing refrigerant lines; no sealed-system opening is required
• Tighten mount fasteners evenly and ensure the compressor sits level and isolated

The Door Gasket is an OEM replacement part for Whirlpool refrigerators. It is designed to create a tight seal between the fresh food door and the refrigerator cabinet, preventing cold air from escaping and maintaining a reliable barrier against cold air leaks.

A bad fresh food door gasket can occur due to wear and tear, cracks, or damage to its structure. If you notice symptoms such as condensation or frost buildup inside the refrigerator, difficulty in maintaining temperature, or the door not closing properly, it may be time to replace the door gasket.

Symptoms of a bad fresh food door gasket include:

• Condensation or frost buildup inside the refrigerator
• Difficulty in maintaining temperature
• Door not closing properly

Restore your refrigerator by replacing the faulty or damaged fresh food door gasket with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This rear unit compartment cover protects internal components and provides a finished steel shroud for the appliance, helping prevent debris contact and reducing exposure to wiring and electronics. Durable steel construction for reliable protection. What it does:

• Covers and shields rear compartment components from dust, debris, and accidental contact
• Helps maintain proper airflow routing and component separation inside the unit
• Reduces noise from internal parts and gives a finished appearance to the rear compartment
• Can prevent shorting or damage caused by foreign objects reaching wiring or electronics

• Disconnect power to the appliance before beginning any work
• Use appropriate hand tools to remove and reinstall mounting screws; retain any original hardware if reusable
• Align tabs and mounting holes carefully to avoid bending the cover or stressing adjacent components
• Wear gloves to protect hands from sharp edges

This replacement door assembly restores safe access and protection for your appliance. It replaces a cracked, damaged or non-closing door so the appliance can close properly and look like new again. What it does

• Replaces a damaged or cracked door to restore proper closing and safe access.
• Helps prevent leaks, debris entry, and loss of conditioned air or heat depending on the appliance.
• Restores latch engagement and door alignment for reliable operation.
• Improves cosmetic appearance by replacing scratched, dented, or faded doors.

• Disconnect power and, for appliances that use water, turn off water supply before starting.
• Handle glass and sharp edges carefully; wear gloves and eye protection.
• Installation typically requires removing hinge screws and aligning the door; retain all fasteners and follow model-specific instructions.

Color: Grey

The Compressor is an OEM part for Whirlpool refrigerators. It is responsible for the cooling process of your refrigerator.  It compresses the refrigerant gas, creating the necessary pressure to circulate refrigerant and regulate the temperature inside the refrigerator. 

A bad compressor can occur due to various factors, including wear and tear, electrical issues, or refrigerant leaks. If you notice symptoms such as inadequate cooling, unusual noises coming from the refrigerator, or the refrigerator not running at all, it may be time to replace the compressor.

Symptoms of a bad compressor include:

• Inadequate cooling or inconsistent temperature
• Unusual noises, such as clicking or buzzing
• Refrigerator not running or not cooling at all

Repair your refrigerator by replacing the faulty or damaged compressor with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This mounting bracket secures internal components to the appliance chassis, restoring stable support and alignment. It replaces a worn, bent, or damaged bracket to reduce rattling and prevent parts from shifting during operation. What it does:

• Provides a secure mounting point for internal assemblies to the appliance frame
• Restores proper alignment when a loose or bent bracket causes vibration or noise
• Prevents components from shifting, which can lead to wear or intermittent operation
• Helps eliminate rattling, clunking, or movement-related symptoms during use

• One mounting bracket

• Disconnect power and water before beginning any repair
• Use original screws or fasteners; replace any stripped or damaged hardware

This evaporator cover is the plastic shroud that protects the refrigerator evaporator coil and helps direct cold airflow through the freezer compartment for more consistent cooling. It replaces a cracked, warped, or damaged cover to restore proper airflow and reduce frost buildup. What it does:

• Shields the evaporator coil from ice, debris, and accidental contact
• Channels cold air evenly from the evaporator into the freezer and fresh-food sections
• Helps reduce uneven cooling, excess frost, and airflow noise caused by a damaged cover
• Works with the evaporator fan and defrost components to maintain normal operation

• One evaporator cover / airflow shroud

• Disconnect power before beginning work to avoid electrical shock or compressor startup
• Remove interior panels, shelves, and the evaporator fan as needed for access
• Handle carefully—plastic edges and nearby metal parts may be sharp
• Follow OEM service instructions for proper fit and to verify any related parts

The Wire Harness is an OEM part for Whirlpool refrigerators. It is responsible for providing electrical connections between various parts of the refrigerator, ensuring proper voltage and communication.

A bad wire harness can be caused by wear and tear, exposure to temperature fluctuations, or accidental damage. If you experience issues such as intermittent power loss, malfunctioning components, or error codes on your refrigerator, it may indicate a problem with the wire harness.

Symptoms of a bad wire harness include:

• Intermittent power loss or flickering
• Malfunctioning display or control panel
• Inconsistent cooling or temperature fluctuations

Replace your faulty wire harness with this genuine OEM part to restore your refrigerator. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This field-service door panel kit replaces a damaged or worn 18" stainless exterior door panel to restore appearance and protect the door surface. Use for visible dents, deep scratches, chipped finish, or surface corrosion. What it does:

• Replaces the outer 18" door panel to restore factory appearance.
• Provides a stainless finished exterior for a uniform look.
• Repairs cosmetic damage such as dents, scratches, or chipped paint.
• Helps prevent further surface corrosion when properly installed.

• Disconnect power and empty the appliance door area before starting.
• Installation may require door trim removal, hardware transfer, and basic hand tools.
• Follow the appliance service manual for alignment and torque specifications.

This humidity control graphic is the replacement label for the crisper drawer humidity slider, restoring clear markings so you can set and read the vent position easily. It helps make humidity settings visible and intuitive. What it does:

• Replaces worn, faded or missing humidity-slider markings on the crisper vent
• Restores clear low/med/high or open/closed indicators for accurate vent position reading
• Helps prevent confusion when adjusting drawer humidity for produce storage
• Matches OEM appearance and placement to maintain original look

• One humidity control graphic/label for the crisper humidity slider

• Disconnect power to the appliance before accessing interior components when required
• Remove the crisper drawer and clean the mounting area; peel-and-stick or snap-in fit may be adhesive-backed
• Align the graphic carefully before attaching to avoid rework; press firmly to ensure full adhesion