Wrt31fzdw02 Parts

This air duct directs heated air from the dryer drum to the exhaust path, helping maintain proper airflow and drying performance. Replace a damaged or cracked duct to restore safe venting and reduce heat loss. What it does:

• Channels warm, moist air from the dryer drum to the exhaust system
• Keeps airflow directed to the vent to help clothes dry evenly
• Prevents internal air leaks that can lower drying efficiency
• Can help reduce unusual odors or hot spots caused by damaged ducting

• Disconnect power (and gas, if applicable) before servicing the dryer
• Remove the dryer top or rear access panel as needed to reach the duct
• Check adjoining seals and vent hoses for wear; replace if damaged for best performance

Color: White

This gasket seals the appliance's FIP (fill/fit inlet/connector) to help prevent water leaks at the inlet connection. A small, simple part that restores a watertight seal and helps keep the area under and around the appliance dry. What it does:

• Forms a watertight seal at the fill/connection fitting to stop drips and leaks.
• Helps prevent water from pooling under the appliance or around the inlet.
• Commonly replaced when the inlet area shows visible wear, cracking, or persistent leaks.
• Can eliminate intermittent filling issues caused by a poor seal at the connection.

• One replacement gasket.

• Always disconnect power and shut off the water supply before replacing the gasket.
• Remove the old gasket and clean the mating surfaces; install the new gasket fully seated to ensure a proper seal.
• Inspect the mating fitting for damage—replace any corroded or deformed fittings to avoid repeat leaks.
• Use the OEM part number to fit for your specific model.

This steel rear unit compartment cover replaces a damaged or corroded rear panel to protect internal components and maintain cabinet integrity. Designed for a direct, OEM-fit replacement to restore enclosure protection. What it does:

• Shields motors, wiring and controls from debris, moisture and physical contact
• Helps maintain proper airflow routing around rear-mounted components
• Prevents vibration-related wear by securing the unit compartment
• Visible rust, dents or a missing panel are common signs this cover needs replacement

• Disconnect power before access and wear gloves; edges may be sharp
• Remove service access panels to reach and unbolt the old cover; retain fasteners if reusable
• Align cover and fasten securely; verify clearance to wiring and moving parts before restoring power

Color: Grey

This OEM grease is a purpose-made appliance lubricant that reduces friction and protects moving parts for smoother operation and longer component life. Use where specified by the manufacturer for bearings, slides, or motor shafts. What it does:

• Lubricates gears, bearings, rollers and shafts to reduce wear and noise
• Helps prevent binding, seizing, and grinding on moving components
• Protects metal parts from corrosion where grease is specified
• Keeps parts moving smoothly under normal operating temperatures

• Disconnect power before servicing any appliance; follow manufacturer service instructions
• Apply sparingly to clean, dry surfaces; avoid over-greasing which can attract debris
• Wear gloves and wipe excess grease from surrounding areas to prevent staining

This small metal mounting clip secures the thermal fuse in place to maintain proper thermal contact and stable wiring. It helps keep the fuse positioned so the appliance can monitor temperature reliably and operate safely. What it does:

• Secures the thermal fuse to the appliance housing or duct to prevent movement
• Keeps the fuse in correct contact with temperature-sensing surfaces
• Helps prevent intermittent heating or thermal-sensor misreads caused by a loose fuse
• Useful when replacing a damaged or missing fuse retainer during fuse service

• One thermal fuse mounting clip

• Disconnect power to the appliance before servicing to avoid shock or injury
• Remove access panels per your model's service instructions to reach the fuse location
• Install clip in the same orientation as the original; use pliers if needed to seat it firmly
• Inspect the thermal fuse and wiring while installing; replace any damaged components per OEM guidance

Sealer for refrigerant line insulation.

Color: Grey

A small metal clamp that secures flexible hoses or tubing in laundry and kitchen appliances to prevent leaks and keep connections tight. Simple, durable replacement for a worn or loose hose fastening point. What it does

• Holds a hose or tube firmly to a barb, fitting or nipple to stop leaks and movement
• Restores a secure connection where a cracked or corroded clamp allows fluid or air escape
• Common service item for loose drain, fill, or vent hoses showing seepage or slipping
• Helps maintain proper appliance function by ensuring sealed hose connections

• One clamp

• Disconnect power and water before servicing; follow your appliance safety procedures
• Inspect mating hose and fitting for damage; replace hose if cut or brittle
• Use the correct pliers or clamp tool for safe installation and to avoid over-tightening

This filler is a trim piece that fills the gap between the appliance and surrounding cabinetry for a finished look and to keep debris out of tight spaces. It restores proper fit and appearance after removal or damage. What it does:

• Covers the gap between the appliance and cabinets to improve appearance
• Prevents small items and debris from getting trapped in the gap
• Restores proper alignment and sealing where trim has been lost or damaged
• Useful when replacing panels or re-installing the appliance

• One filler trim piece as shown

• Designed for simple, non-technical replacement; typically snaps or screws into place
• Turn off and disconnect the appliance power before accessing mounting areas
• Keep fasteners from original installation; replace only with matching hardware if needed

This genuine replacement cover protects internal components and gives the appliance a finished appearance. Designed to fit the original mounting points, it helps keep dust and debris away from sensitive parts for reliable operation. What it does

• Shields electronic and mechanical components from dirt and lint buildup
• Restores the appliance's exterior finish where the original cover was damaged or missing
• Helps reduce exposure to moving parts and potential debris
• Maintains proper airflow paths and component spacing when correctly installed

• Disconnect power to the appliance before beginning any repair
• Use basic hand tools; keep track of screws and fasteners for reassembly
• Handle edges carefully to avoid cuts and protect adjacent surfaces from scratches
• Follow the OEM service manual for disassembly/reassembly steps and torque values

This wire harness connects the appliance's control components to power and sensors, restoring reliable electrical communication and operation. It replaces a damaged or worn harness to help stop intermittent power, no-start, or control errors. What it does

• Routes power and signal between the control board and console, switches, or sensors.
• Replaces frayed, melted, or broken wiring that can cause intermittent operation or failure to start.
• Restores proper connector fit where loose or corroded terminals cause poor electrical contact.
• Helps eliminate control errors and erratic behavior caused by broken or shorted wires.

• One complete wire harness assembly as shown.

• Always disconnect power (unplug or shut off breaker) before accessing internal wiring.
• Compare the new harness to the old one and transfer any mounting clips or tie straps as needed.
• Route wires away from heat sources and sharp edges; secure with original clips or cable ties.
• If terminals or connectors are damaged, replace the entire harness—do not splice or tape high-current wires.

This wire assembly routes power and control signals within the appliance using XL double-insulated conductors to protect circuits and reduce wear. It replaces damaged or brittle internal wiring to restore reliable electrical connections. What it does:

• Replaces an internal wire harness used for power and signal routing
• Double-insulated conductors help prevent shorting and reduce chafing risk
• Commonly used when wiring shows burn, breaks, or loss of continuity
• Helps stop intermittent operation caused by damaged internal wires

• One wire assembly

• Disconnect power before inspecting or replacing wiring to avoid shock
• Secure wiring away from sharp edges and moving parts to prevent damage