Wrt31fzdw02 Parts

The Crisper Pan is an OEM component for Whirlpool refrigerators. Located in the crisper drawer, it collects moisture to prevent stored fruits and vegetables from drying out or wilting.

The crisper pan utilizes a precise design and surface texturing to maintain the optimal humidity level. Its material withstands continuous use without warping or staining over time. Drainage holes allow excess liquids to return to the pan.

Symptoms of a bad crisper pan can include:

• Moisture streaking on drawer surfaces over multiple uses  
• A buildup of pink or white residue from dried-out produce
• Fruits and vegetables show signs of wilting or decay more quickly
• Deformation from cracking, creasing, or impact damage

This OEM part is also compatible with refrigerators from Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, and Kenmore.

The Heater is an OEM part for Whirlpool refrigerators. It safely provides heat inside the refrigerator compartment to prevent food from freezing and helps maintain proper temperature levels. 

Causes of a bad heater can include dust buildup or mineral deposits over time that cause decreased efficiency, burning out of heating elements due to prolonged use, or damage from moisture or liquid spills inside the refrigerator.   

Symptoms of a bad heater include:

• Inability to maintain proper refrigeration temperatures 
• Higher energy usage as the compressor runs excessively 
• Frost or ice buildup inside the refrigerator 
• A burnt smell emitting from the heater area

This Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This freezer shelf assembly provides a sturdy, easy-to-clean surface for organizing frozen goods and restoring proper storage spacing. Replaces a cracked, warped, or missing shelf to help keep items secure and accessible. What it does:

• Provides stable support for frozen food and containers to prevent sagging or falling
• Restores proper shelf spacing and organization inside the freezer compartment
• Helps maintain airflow by fitting into the designed shelf brackets
• Common fix for shelves that are cracked, broken, warped, or otherwise unusable

• Remove all food and any loose items from the shelf area before installation
• Slide the shelf into the factory mounting brackets until it seats fully; no special tools typically required
• Inspect bracket rails for damage and replace if worn to ensure proper fit

This door trim is the molded finishing frame for the appliance door. Replacing a cracked, warped, or missing trim restores a clean look and helps keep door components properly aligned for a secure fit.

• Finishes the door edge and conceals gaps or fasteners for a clean appearance
• Depending on model, helps retain the outer panel or glass window
• Helps maintain proper alignment and feel of the door assembly
• Common symptoms: cracked/chipped trim, loose or rattling piece, gaps or sharp edges, cosmetic damage

• Disconnect power before servicing; shut off gas/water if applicable
• Protect the door and any glass; support the door if removal is required
• Transfer any clips, seals, or screws from the old trim; match the original orientation
• Secure the trim without overtightening and verify smooth door closing/latch alignment

This replacement grille covers the appliance's front vent opening to maintain airflow and protect internal components. It restores a clean, finished appearance and secure fit when the original grille is cracked, warped, loose, or missing.

• Directs airflow through the unit for proper ventilation
• Shields internal parts from debris and accidental contact
• Replaces a broken, warped, or missing grille
• Common symptoms include rattling, poor fit, visible cracks, or an exposed opening

• Disconnect power to the appliance before servicing
• Remove mounting screws or release retaining tabs; keep hardware for reuse
• Align the new grille with tabs or slots and secure without overtightening
• Restore power and confirm proper fit and clearance

The Door Gasket is an OEM part for Whirlpool refrigerators. It provides an air-tight seal between the refrigerator door and cabinet to ensure cool air is contained within the refrigerator compartment. The gasket is made of flexible yet durable materials designed to compress and flex numerous times without degradation as the door is opened and closed on a daily basis.

Causes of a bad door gasket can include cracking, tearing or warping of the material over time and repeated use. Improper closing of the door or excessive force when opening/closing can also damage the gasket.

Symptoms of a bad door gasket include:

• Inability to maintain a consistent interior temperature
• Frost or moisture buildup around the edges of the door or along the top/sides of the refrigerator
• Warm air leaking into the refrigerator compartments
• The door not sealing tightly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Ice Maker is an OEM part for Whirlpool refrigerators. It is responsible for producing and dispensing ice cubes for storage and dispensing. 

A bad ice maker can occur due to various factors, including electrical issues, mechanical failures, or water supply problems. If you notice a decrease in ice production, no ice being dispensed, or unusual noises coming from your refrigerator, it may indicate a problem with the ice maker.

Symptoms of a bad ice maker include:

• Decreased ice production or no ice being produced
• Ice cubes not dispensing properly or getting stuck
• Unusual noises coming from the ice maker or refrigerator

Replace your faulty ice maker with this genuine OEM Whirlpool part to restore your refrigerator.

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The User Control and Display Board is an OEM part for Whirlpool refrigerators. As the central processing unit, this board manages and monitors all electronic functions such as temperatures, cycles, alarm settings, and the user interface display.

Causes of failure may include moisture damage, power surges, component fatigue from years of use, or other electrical issues.

Symptoms of a bad board can include:

• Faulty or unresponsive display and control buttons
• Inaccurate temperature readings
• Improper or lack of cooling
• Appliance fails to operate as normal

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This wire harness connects the touch matrix/user interface to the appliance's control system, carrying power and keypad signals. Replacing a damaged harness can restore reliable button response and consistent control-panel operation.

• Links the touch matrix/user interface to the main control board
• Transmits low-voltage power and signal inputs from the keypad
• Improper routing or damaged conductors can cause intermittent inputs
• Can lead to symptoms like unresponsive buttons, erratic UI behavior, or flickering/blank panel

• Disconnect power to the appliance before servicing; shut off gas supply if applicable
• Photograph original wire routing and connector locations for reference
• Depress connector locking tabs—do not pull on wires; seat connectors fully
• Route and secure the harness away from sharp edges and heat; reuse retainers/clips

This meat pan is the oven broiler drip tray that catches juices and grease while broiling or roasting, helping keep the oven cavity cleaner and reducing smoke from drippings. Fits standard drop-in broiler use. What it does:

• Catches drippings and grease during broiling and roasting
• Helps reduce smoking and flare-ups from food juices
• Provides a stable surface for foods placed under the broiler
• Makes cleanup easier by containing messes in one removable pan

• One meat (broiler/drip) pan

• Allow oven and pan to cool before handling; use oven mitts to avoid burns
• Place pan on the broiler rack or designated support per your oven's configuration
• Inspect pan for warping or heavy damage before use; replace if warped or cracked
• Clean with nonabrasive sponge and mild detergent; avoid harsh scrubbing that may damage the finish

This hinge shim corrects hinge spacing to help doors sit square and reduce rubbing or uneven gaps. It's a simple replacement used to restore proper door alignment so the door closes and seals more reliably. What it does:

• Adjusts hinge spacing to realign doors; use when a door leans or shows uneven gaps.
• Helps the door close and seal better by restoring correct hinge clearance.
• Prevents binding or rubbing that can occur when a hinge or door is slightly out of position.
• Small, low-profile shim used as a targeted fix without replacing the entire hinge assembly.

• Disconnect power to the appliance before starting; if applicable, shut off the water supply.
• Support the door while loosening hinge fasteners to avoid sudden movement or injury.
• Install the shim between hinge components as shown in the service diagram; retighten fasteners evenly.

The Door Gasket is an OEM replacement part for Whirlpool refrigerators. It is designed to create a tight seal between the fresh food door and the refrigerator cabinet, preventing cold air from escaping and maintaining a reliable barrier against cold air leaks.

A bad fresh food door gasket can occur due to wear and tear, cracks, or damage to its structure. If you notice symptoms such as condensation or frost buildup inside the refrigerator, difficulty in maintaining temperature, or the door not closing properly, it may be time to replace the door gasket.

Symptoms of a bad fresh food door gasket include:

• Condensation or frost buildup inside the refrigerator
• Difficulty in maintaining temperature
• Door not closing properly

Restore your refrigerator by replacing the faulty or damaged fresh food door gasket with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This compressor grommet is the rubber isolator that cushions the refrigerator's compressor at its mounting points. Replacing a worn grommet helps quiet vibration and rattling and reduces stress on refrigerant tubing for smoother, safer operation.

• Isolates the compressor from the base to damp vibration and humming
• Helps prevent metal-to-metal contact and rattling at the mounts
• Supports proper compressor alignment to reduce stress on tubing
• Helps with symptoms like loud buzzing/rattling or cracked/flattened rubber at the compressor feet

• Unplug the appliance and remove the rear access cover to reach the compressor area
• Support the compressor while removing hardware; replace the grommet in the same orientation
• Avoid kinking or stressing refrigerant lines; no sealed-system opening is required
• Tighten mount fasteners evenly and ensure the compressor sits level and isolated

This Support (mounting bracket) secures a panel or component to the appliance frame to restore stability and reduce vibration. Replacing a broken or worn support helps stop rattling, misalignment, and loose panels. What it does:

• Secures panels or components to the appliance frame; symptom: loose or sagging panel, visible movement.
• Reduces vibration and noise caused by a failed bracket; symptom: increased rattling during operation.
• Maintains alignment for moving parts or doors; symptom: binding, misalignment, or uneven gaps.
• Replaces cracked, bent, or worn supports to restore original fit and function.

• Disconnect power to the appliance (and shut off gas for gas models) before starting any repair.
• Basic hand tools are typically required; keep original screws and hardware unless new hardware is supplied.
• Follow the appliance owner's manual or service guide for model-specific steps and torque requirements.