Wrt31fzdw02 Parts

The Refrigerator Roller is an OEM part for Whirlpool refrigerators. This component allows for easy movement of the refrigerator, enabling smooth sliding and positioning during installation or cleaning. Does not include the leveling screw. For complete assembly order part number AP5988919.

Causes of a bad refrigerator roller can include regular wear and tear, exposure to heavy loads, or damage from moving the refrigerator across uneven surfaces.

Symptoms of a bad Refrigerator Roller include:

• Difficulty moving the refrigerator
• Unstable or uneven positioning
• Noisy or squeaky movement
• Visible damage to the roller, such as cracks or breaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This center rail track supports and guides a sliding assembly inside your appliance, keeping the rack or drawer aligned and moving smoothly. Replace a cracked or bent center track to restore easy, stable operation and reduce binding. What it does:

• Provides the middle guide surface for a slide system
• Maintains level alignment with the mating rails
• Allows smooth in-and-out travel of the rack/drawer
• Typical symptoms: sticking or rough movement, derailment, tilting, or visible cracks/warping

• 1 center rail track

• Unplug or disconnect power before servicing; shut off gas if applicable
• Remove the rack/drawer and note the rail's orientation for reassembly
• Reuse existing fasteners and transfer any clips/brackets from the old track
• Test for smooth travel before returning to service

The Center Door Hinge is an OEM replacement part for Whirlpool refrigerators. As one of several hinges supporting each refrigerator door panel, it works to guide opening and closing movements.

Causes of a faulty center hinge tend to be wear from years of continuous operation with near-daily door cycles. Complete failure could also occur in the event of physical damage sustained during a repair or installation issue.

Symptoms include:

• Looseness, wobbling, or misalignment of the associated door
• Increased effort required to open or close doors
• Potential for doors to fall off alignment, cease opening fully
• Risk of door detachment altogether without hinge support

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

Color: Black

The Axle is an OEM part for Whirlpool refrigerators. This axle allows it to be easily repositioned or moved for cleaning and maintenance. It supports the rollers that enable the refrigerator to glide across the floor.

Common causes of a bad axle include prolonged use, excessive weight, or impact damage, which can lead to the axle bending or breaking.

Symptoms of a bad refrigerator roller axle include:

• Difficulty moving the refrigerator
• Uneven or wobbling movement
• Scratches or damage to the floor
• The refrigerator not staying level

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Color: Black

Replace a cracked or loose door handle with this factory-fit handle for select dishwashers. It restores a secure grip for opening and closing the door and refreshes the front appearance.

• Provides the handhold needed to open and close the dishwasher door
• Direct replacement for a broken, cracked, loose, or missing handle
• Helps correct a wobbly or unstable grip point on the door
• Refreshes the look of the appliance front panel

• Disconnect power at the breaker before servicing the door
• Open the door and access the handle's mounting screws from the inside; support the handle while removing hardware
• Transfer and reuse existing screws or end caps if your model uses them
• Tighten evenly; check door operation before restoring power

The Track is an OEM replacement part for Whirlpool refrigerators. It is designed to support and guide the movement of the refrigerator drawer opening and closing. It is responsible for keeping the drawer aligned and preventing it from falling off track or becoming misaligned.

A bad track rail can occur due to wear and tear, physical damage, or improper installation. If you notice symptoms such as a sticking or jamming drawer, difficulty in sliding the drawer in and out smoothly, or a misaligned drawer, it may be time to replace the track rail.

Symptoms of a bad track include:

• Sticking or jamming drawer
• Difficulty in sliding the drawer smoothly
• Misaligned drawer

Restore your refrigerator drawer by replacing the faulty or damaged track with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Right side.

The Hinge Pin is an OEM part for Whirlpool refrigerators. This part allows the door to open and close smoothly, providing a durable pivot point for the door's movement.

Over time, hinge pins can wear down or become damaged due to the constant stress of door movement, improper alignment, or accidental force applied to the door. A compromised hinge pin can lead to issues such as difficulty in opening or closing the door, a door that hangs unevenly or doesn't seal properly, and increased wear on other door components.

Symptoms of a bad Hinge Pin include:

• Squeaking or resistance when opening or closing the door
• The door not closing fully or sealing properly
• Visible wear or damage to the pin
• The refrigerator or freezer door hanging unevenly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Size: 8 x 1/2 ab.

Color: Apollo Grey

This refrigerator meat pan replaces a broken or missing deli drawer to restore smooth, easy access storage for meats, cheeses, and snacks. Keep items organized while maximizing your refrigerator's usable space and convenience. What it does:

• Provides a dedicated bin for deli/meat items in the fresh food section
• Slides into existing rails for organized, easy access
• Restores function when the original drawer is cracked, warped, or missing
• Common symptoms: drawer broken, hard to open/close, falls off track, or won't stay seated

• 1 meat pan

• Disconnect power before servicing; handle glass and plastic parts with care
• Remove contents and slide the old drawer straight out of the tracks
• Align the new pan with both rails and push in until fully seated
• Let cold plastic warm to room temperature before installation to reduce risk of cracking

Color: White

Color: Black

Color: Grey

The Fresh Food Door Gasket is an OEM part for Whirlpool refrigerators. It is a replaceable sealing strip located around the fresh food compartment door that helps maintain cool temperatures inside.

Causes of a bad gasket can include breakdowns in the adhesive over time allowing air gaps, or physical damage such as cracks or punctures compromising the seal. 

Symptoms of a faulty gasket include:

• Frost or moisture condensation building up inside  
• Higher energy bills from the compressor running excessively
• Warm air freely entering/exiting around the perimeter 

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This track guides and supports a drawer so it opens and closes smoothly, restoring proper alignment and preventing sticking or the drawer from falling off its slide. Use when the drawer binds, drops, or moves unevenly. What it does:

• Guides the drawer along its intended path for smooth opening and closing
• Supports and aligns the drawer to prevent binding, catching, or sagging
• Restores even movement when a drawer comes off its slide or won't glide properly
• Helps maintain secure drawer positioning under normal loading

• Disconnect power to the appliance (when applicable) and remove all contents from the drawer before servicing
• Remove the drawer to access the old track; keep original screws/fasteners and note orientation for reinstallation
• Align the replacement track with the mounting points and secure with the original hardware; avoid overtightening
• Test drawer movement and adjust alignment as needed