Wrv986fdemoi Parts

This O-ring seal provides a watertight seal for the appliance's water path, helping prevent leaks and maintain proper operation. Use this exact replacement when the original ring is cracked, flattened, or worn. What it does:

• Creates a pressure-tight seal at a water connection to stop drips and leaks
• Keeps water contained inside hoses, valves or pump fittings
• Restores proper sealing when the original O-ring becomes brittle or deformed
• Helps prevent water damage to cabinetry and flooring from appliance leaks

• One O-ring seal

• Turn off power and water supply before beginning any repair
• Remove the old O-ring and clean mating surfaces of debris and buildup
• Inspect the groove or fitting for damage; replace the part if the mating surface is scored
• If needed, use a small amount of manufacturer-recommended lubricant to ease installation and protect the O-ring

A replacement icebox rear gasket that seals the freezer compartment to help keep cold air in and reduce moisture intrusion. Restores the door seal to help maintain proper temperature and reduce frost buildup. What it does

• Seals the icebox/freezer door edge to maintain cold compartment temperature.
• Helps prevent warm air and moisture from entering, reducing frost and ice buildup.
• Can improve cooling consistency and help reduce excessive run time caused by a poor seal.
• Common symptom fix: visible gaps, torn or deformed seal, or recurring frost around the door.

• One icebox rear gasket.

• Disconnect power to the appliance before replacing the gasket.
• Remove the old gasket, clean the door/frame sealing surface, and align the new gasket evenly.
• Press the gasket into the channel firmly; some models may require gentle warming or minor adjustment for a snug fit.

This ice door is the replacement chute cover that opens and closes inside the refrigerator dispenser to release ice while helping block warm air and debris. Restores proper ice dispensing and helps keep ice colder and cleaner. What it does

• Opens to allow ice to drop into the dispenser and closes to help block warm air and contaminants.
• Helps prevent ice clumping and melting caused by warm air entering the dispenser.
• Stops small objects and pests from entering the ice chute when the dispenser is not in use.
• Restores proper dispenser operation when the original door is cracked, warped, or stuck.

• One ice door (dispenser chute) as shown.

• Disconnect power to the refrigerator before beginning any service to avoid injury.
• Remove the dispenser housing or inner door panel to access the chute; handle plastic parts carefully to avoid cracking.
• Inspect surrounding mounts and actuator components; replace any damaged clips or springs to ensure correct door movement.

This is a genuine mounting screw used to secure appliance panels and components. It provides reliable fastening to keep parts aligned and reduce vibration-related noise for safer, quieter operation. What it does:

• Secures panels, brackets, or small components to the appliance frame
• Prevents parts from loosening and causing rattling or misalignment
• Maintains proper part positioning for reliable operation
• Helps reduce vibration and noise when panels are fastened correctly

• Use the correct driver and size to avoid stripping the head
• Tighten until snug; do not overtighten which can strip threads or crack plastic
• Disconnect power before servicing electrical appliances to avoid shock
• If a screw is corroded or damaged, replace all similar fasteners in that area for best results

This drip tray collects and channels defrost and condensation water away from the refrigerator cabinet to prevent leaks and puddles. It helps keep the interior base area dry and directs meltwater to the drain system. What it does:

• Catches meltwater from the evaporator during defrost cycles to prevent pooling under the cabinet
• Channels water toward the refrigerator's drain system to reduce leaks and floor damage
• Helps limit ice buildup and moisture-related odors around the freezer base
• Common symptom: visible water or puddling under or beside the fridge, or excessive moisture in the base pan area

• One drip tray as shown

• Disconnect power to the appliance before servicing to avoid electrical shock
• Remove food and, if needed, the lower access panel or kickplate to access the tray
• Inspect adjacent drain tubing and grommets while replacing the tray to ensure proper drainage
• Reinstall panels and restore power; run a short defrost or water cycle to ensure proper drainage

This OEM grease is a purpose-made appliance lubricant that reduces friction and protects moving parts for smoother operation and longer component life. Use where specified by the manufacturer for bearings, slides, or motor shafts. What it does:

• Lubricates gears, bearings, rollers and shafts to reduce wear and noise
• Helps prevent binding, seizing, and grinding on moving components
• Protects metal parts from corrosion where grease is specified
• Keeps parts moving smoothly under normal operating temperatures

• Disconnect power before servicing any appliance; follow manufacturer service instructions
• Apply sparingly to clean, dry surfaces; avoid over-greasing which can attract debris
• Wear gloves and wipe excess grease from surrounding areas to prevent staining

This fan gasket seals the fan housing to help direct airflow and maintain proper cooling performance. It replaces a worn or damaged seal to reduce air bypass and improve temperature consistency in the appliance. What it does:

• Seals the fan housing to keep airflow directed through the evaporator/condenser as designed
• Helps prevent air leaks that can cause uneven cooling or longer run cycles
• Reduces the chance of frost buildup or moisture intrusion around the fan area
• Can minimize wind noise from air escaping gaps at the fan assembly

• Disconnect power to the appliance before beginning any repair
• Remove access panels and the fan housing to reach and replace the gasket
• Ensure the gasket seats evenly around the fan housing; trim none unless specified by the OEM
• Inspect surrounding components (fan blade, housing) for damage and replace if needed

Sealer for refrigerant line insulation.

This small mounting retainer clip secures panels, hoses, or wiring to appliance chassis to prevent vibration and movement. It helps restore proper routing and reduces rattles or chafing from loose components. What it does

• Holds trim, panels, hoses, or wiring in place to prevent rubbing and noise
• Restores correct component alignment after repair or maintenance
• Helps reduce vibration-related rattling and wear
• Simple replacement for a broken, bent, or missing clip

• One mounting retainer clip

• Turn off and unplug the appliance before inspecting or replacing clips
• Remove only the minimal surrounding parts needed for safe access
• Clip may require gentle pressure to seat; avoid forcing or prying on nearby plastic
• Replace all matching fasteners for secure fit

This replacement refrigerator door handle restores a secure grip and original appearance for compatible Whirlpool units. Durable and contoured for everyday use, it makes opening and closing the door easier without cosmetic wear. What it does:

• Replaces a worn, cracked or broken refrigerator door handle
• Restores proper grip and leverage for opening the door smoothly
• Helps prevent door damage and improves appliance appearance
• Fits flush to the door where the original handle mounted

• One replacement refrigerator door handle

• Inspect mounting posts and screws on the door before installing; replace mounting hardware if damaged
• Installation typically requires removing the old handle screws and securing the new handle with the original fasteners
• Disconnect power only if instructed by the model's service manual; most handle swaps do not require electrical disconnection

This upper left door hinge supports and guides the appliance door for smooth opening and secure alignment. Replacing a worn or damaged hinge restores proper door fit and helps prevent sagging or uneven seals. What it does:

• Provides the pivot point that lets the door open and close smoothly
• Keeps the door aligned to maintain an even seal and proper closing
• Prevents door sagging, rubbing, or misalignment that can cause gaps
• Works with the hinge pin and mounting points to support door weight

• Disconnect power to the appliance and remove food from the door area before starting
• Support the door while removing and installing the hinge to prevent dropping or damage
• Use the same mounting hardware unless replacements are specified; tighten fasteners securely but do not overtighten
• Inspect strike plates, lower hinge, and gasket for related wear

A small replacement retainer that secures internal components and trim pieces so they stay properly aligned and stable. Restoring a broken retainer helps stop rattling and keeps parts seated for reliable operation. What it does:

• Secures panels, trim, or small assemblies in place to prevent shifting
• Reduces vibration and rattling caused by a loose or broken clip
• Keeps wiring or hoses routed and held away from moving parts
• Helps maintain proper alignment of the part it supports

• Disconnect power to the appliance before servicing to avoid shock
• Use basic hand tools; inspect surrounding parts for damage before reinstalling
• Handle sharp sheet-metal edges carefully and wear gloves if needed
• Replace only the failed retainers; verify fit before final reassembly

This support is a replacement mounting bracket that secures internal components and panels so they stay properly aligned and stable. It restores correct fit and reduces movement from normal use. What it does:

• Provides a secure mounting point for internal panels or components to prevent sagging or rattling
• Restores alignment for panels that sit uneven or loose
• Helps stop vibration noise caused by worn or broken supports
• Protects connected parts from stress or damage due to improper support

• One support

• Disconnect power to the appliance before starting any repair
• Basic tools typically required; handle parts carefully to avoid scratching or bending
• Keep fasteners and hardware; replace any damaged screws or clips as needed
• Refer to the parts diagram for exact placement and torque specs

This glass turntable plate replaces a cracked or missing microwave turntable tray to restore stable, even rotation for food during cooking. It's a direct-fit replacement designed to sit on the roller support and rotate with the motor shaft. What it does:

• Supports dishes and cookware while the microwave turntable rotates for more even heating
• Provides a stable, level surface so food cooks consistently across the plate
• Replaces cracked, chipped or missing glass to eliminate scraping sounds and unsafe fragments
• Works with the existing roller guide and drive coupling to turn with the microwave motor

• One glass turntable plate

• Unplug the appliance before installing and allow the interior to cool
• Clean the roller support area of debris before seating the plate
• Center the plate on the roller guide/drive coupling so it rotates freely
• Do not use a chipped or shattered plate; replace immediately if damaged

This evaporator cover is the molded shroud that protects the freezer evaporator and helps direct airflow for consistent cooling. It replaces a damaged or missing cover to reduce frost buildup and improve temperature performance. What it does:

• Shields the evaporator coil from physical damage and debris
• Directs airflow over the evaporator for more even cooling
• Helps reduce frost buildup and ice forming on the coil
• Can reduce vibration/noise caused by loose or broken shrouds
• Addresses symptoms like excessive frost, uneven temperatures, or unusual freezer noise

• Always disconnect power to the appliance before beginning any repair
• Remove food, shelving, and interior panels as needed to access the evaporator compartment
• Handle carefully to avoid bending the evaporator coil or damaging mounting tabs
• Defrost and dry the area before installing the new cover