Wrx35sdbm00 Parts

This mullion rail is the molded trim piece that finishes the vertical edge of a refrigerator or freezer door, restoring the door's appearance and helping cover the gap between sections. Ideal for worn, cracked, or missing trim. What it does:

• Provides a finished trim surface along the door edge to improve appearance
• Helps cover the door seam and conceal internal components
• Prevents drafts where trim is damaged or missing (cosmetic/airflow symptom)
• Replaces cracked, warped or broken mullion trim that affects fit and look

• Disconnect power or unplug unit before beginning any repairs
• Usually snaps or screws into place; inspect retaining clips or fasteners and replace if damaged
• Handle carefully to avoid scratching finished surfaces; use appropriate trim tools

This OEM grease is a purpose-made appliance lubricant that reduces friction and protects moving parts for smoother operation and longer component life. Use where specified by the manufacturer for bearings, slides, or motor shafts. What it does:

• Lubricates gears, bearings, rollers and shafts to reduce wear and noise
• Helps prevent binding, seizing, and grinding on moving components
• Protects metal parts from corrosion where grease is specified
• Keeps parts moving smoothly under normal operating temperatures

• Disconnect power before servicing any appliance; follow manufacturer service instructions
• Apply sparingly to clean, dry surfaces; avoid over-greasing which can attract debris
• Wear gloves and wipe excess grease from surrounding areas to prevent staining

This small metal mounting clip secures the thermal fuse in place to maintain proper thermal contact and stable wiring. It helps keep the fuse positioned so the appliance can monitor temperature reliably and operate safely. What it does:

• Secures the thermal fuse to the appliance housing or duct to prevent movement
• Keeps the fuse in correct contact with temperature-sensing surfaces
• Helps prevent intermittent heating or thermal-sensor misreads caused by a loose fuse
• Useful when replacing a damaged or missing fuse retainer during fuse service

• One thermal fuse mounting clip

• Disconnect power to the appliance before servicing to avoid shock or injury
• Remove access panels per your model's service instructions to reach the fuse location
• Install clip in the same orientation as the original; use pliers if needed to seat it firmly
• Inspect the thermal fuse and wiring while installing; replace any damaged components per OEM guidance

This solenoid valve coil energizes the refrigerant service valve to help control refrigerant flow in compatible refrigeration systems. Replaces a worn or failed coil to restore valve actuation and reliable cooling system operation. What it does

• Energizes the refrigerant service valve so the valve can open or close when the system calls for it
• Common replacement when the valve won't actuate or the compressor cycle is abnormal
• Helps stop intermittent cooling caused by a stuck or non-responsive valve coil
• Fits into the valve assembly and provides the magnetic force needed for proper valve movement

• Disconnect power to the appliance before servicing to prevent shock or unintended compressor operation
• Inspect the valve and connector for corrosion or damage; replace the valve if body damage is found

This fan gasket seals the fan housing to help direct airflow and maintain proper cooling performance. It replaces a worn or damaged seal to reduce air bypass and improve temperature consistency in the appliance. What it does:

• Seals the fan housing to keep airflow directed through the evaporator/condenser as designed
• Helps prevent air leaks that can cause uneven cooling or longer run cycles
• Reduces the chance of frost buildup or moisture intrusion around the fan area
• Can minimize wind noise from air escaping gaps at the fan assembly

• Disconnect power to the appliance before beginning any repair
• Remove access panels and the fan housing to reach and replace the gasket
• Ensure the gasket seats evenly around the fan housing; trim none unless specified by the OEM
• Inspect surrounding components (fan blade, housing) for damage and replace if needed

This replacement shim is a thin positioning spacer used to align or level internal components for correct fit and operation. It helps restore proper clearances and reduce rubbing, noise, or misalignment-related issues. What it does:

• Provides precise spacing between parts to ensure correct alignment
• Helps eliminate rubbing or contact that can cause noise or wear
• Restores proper component clearance after service or reassembly
• Used when a missing, worn, or incorrect spacer leads to misalignment symptoms

• One replacement shim

• Inspect mating surfaces and clean debris before installing the shim
• Verify correct placement and orientation against the original shim or diagram
• Tighten fasteners to the manufacturer's specifications; do not overtighten
• Disconnect power and follow all safety precautions before servicing

Sealer for refrigerant line insulation.

This water tank cover replaces a damaged or missing upper reservoir cover to keep the appliance's water reservoir contained and protected. It restores a proper seal and helps prevent water from spilling into internal compartments. What it does:

• Covers and protects the water reservoir to reduce leaks and water intrusion
• Helps maintain correct water flow paths inside the cabinet
• Prevents debris from entering the tank and affecting performance
• Reduces risk of water contacting electrical components or insulation

• One water tank cover

• Designed for drop-in or snap-in replacement; follow OEM diagram for orientation
• Disconnect power and water supply before servicing to avoid shock and leakage
• Inspect adjoining gaskets and mounting clips; replace if cracked or missing
• Handle plastic parts gently to avoid cracking; use appropriate tools to remove fasteners

The Compressor is an OEM component specifically designed for Whirlpool refrigerators. Located inside the refrigerator cabinet, the compressor circulates refrigerant throughout the cooling system, regulating temperatures inside food compartments. Its efficient operation is crucial to food freshness and refrigerator function.

Symptoms of a bad compressor include: 

• Elevated interior temperatures unable to be maintained  
• Louder than normal buzzing or humming sounds coming from inside
• Frost or ice building up in areas where it typically would not  
• Refrigerator lights repeatedly cycling on and off

Causes of compressor failure involve normal wear of internal parts over time, loss of refrigerant allowing components to overwork, or disruption in the flow and pressure of circulating coolant. 

This OEM Whirlpool part is compatible with Maytag, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models. 

This genuine wire harness routes power and signals between electrical components to restore reliable operation and safe connectivity. It replaces damaged or worn wiring that can cause intermittent function or loss of power. What it does:

• Connects control, motor and sensor circuits so the appliance components communicate and receive power
• Replaces frayed, chafed or burnt wires that can cause intermittent operation or failure to start
• Restores secure connector fit to prevent arcing and erratic behavior
• Helps eliminate wiring-related faults that trigger error codes or safety cutouts

• Always disconnect power (unplug or switch off breaker) before starting work
• Note or photograph original routing and connector positions for correct reassembly
• Inspect nearby wiring, connectors and fasteners; secure harness away from heat and sharp edges

This adapter connects the appliance's water line to the inlet fitting, providing a secure path for water flow to components like ice makers and dispensers. It helps restore proper water delivery and prevents loose or leaking connections. What it does:

• Creates a sealed connection between the supply line and the appliance inlet
• Restores proper water flow when a worn or damaged connection causes low or no water delivery
• Stops leaks caused by cracked or loose fittings at the inlet
• Works where a direct hose-to-inlet connection needs a small matching adapter

• One adapter as shown

• Disconnect power and shut off the water supply before starting any work
• Verify correct orientation and thread engagement; hand-start threads then snug with a wrench—do not overtighten
• Inspect nearby hoses, seals, and fittings; replace if cracked or damaged

The Wire Harness is an OEM component for Whirlpool refrigerators. As the framework that powers all electronic systems, it plays a vital connecting role. 

The harness incorporates precisely engineered cabling to route electrical signals and low-voltage DC power throughout the appliance in a protected bundle. Strategically placed terminals link to each component board and relay. 

Causes for wire harness issues include pinched insulation from improper installation, short circuits due to nicks/cuts in the sheathing over time, or broken connectors that disrupt circuit pathways.

Symptoms of a bad wire harness can include:

• Lights, fans, or temperature control malfunctions 
• Failure to power on or intermittent cut-outs
• Tripped circuit breakers/blown fuses for the fridge  
• Wire cracking, looseness at bundle ties

Compatible with models from Maytag, KitchenAid, Jenn-Air, Amana, and select Kenmore as well for continued reliability.

A small replacement retainer that secures internal components and trim pieces so they stay properly aligned and stable. Restoring a broken retainer helps stop rattling and keeps parts seated for reliable operation. What it does:

• Secures panels, trim, or small assemblies in place to prevent shifting
• Reduces vibration and rattling caused by a loose or broken clip
• Keeps wiring or hoses routed and held away from moving parts
• Helps maintain proper alignment of the part it supports

• Disconnect power to the appliance before servicing to avoid shock
• Use basic hand tools; inspect surrounding parts for damage before reinstalling
• Handle sharp sheet-metal edges carefully and wear gloves if needed
• Replace only the failed retainers; verify fit before final reassembly

This support is a replacement mounting bracket that secures internal components and panels so they stay properly aligned and stable. It restores correct fit and reduces movement from normal use. What it does:

• Provides a secure mounting point for internal panels or components to prevent sagging or rattling
• Restores alignment for panels that sit uneven or loose
• Helps stop vibration noise caused by worn or broken supports
• Protects connected parts from stress or damage due to improper support

• One support

• Disconnect power to the appliance before starting any repair
• Basic tools typically required; handle parts carefully to avoid scratching or bending
• Keep fasteners and hardware; replace any damaged screws or clips as needed
• Refer to the parts diagram for exact placement and torque specs

This evaporator cover is the molded shroud that protects the freezer evaporator and helps direct airflow for consistent cooling. It replaces a damaged or missing cover to reduce frost buildup and improve temperature performance. What it does:

• Shields the evaporator coil from physical damage and debris
• Directs airflow over the evaporator for more even cooling
• Helps reduce frost buildup and ice forming on the coil
• Can reduce vibration/noise caused by loose or broken shrouds
• Addresses symptoms like excessive frost, uneven temperatures, or unusual freezer noise

• Always disconnect power to the appliance before beginning any repair
• Remove food, shelving, and interior panels as needed to access the evaporator compartment
• Handle carefully to avoid bending the evaporator coil or damaging mounting tabs
• Defrost and dry the area before installing the new cover