Wrx735dbm00 Parts

The door hinge is an OEM part for Whirlpool refrigerators. It plays a role in holding the refrigerator door securely in place while allowing it to swing freely for easy access. The hinge is designed to withstand the pressure of opening and closing the door smoothly over many years of use.

Causes of a bad hinge include wear and tear from repeated opening and closing of the door, exposure to excessive force or impact, or overloading of the door with heavy items.

Symptoms of a bad hinge include:

• The door not closing properly or unevenly
• Increased effort required to open or close the door
• Noises or squeaking coming from the hinge area
• The door leaning or not staying securely closed

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This drip tray collects defrost and condensation water under the refrigerator to help prevent leaks and water pooling on the floor. It restores proper water capture and drainage for affected fridge models. What it does:

• Catches defrost and condensation runoff from the evaporator or drain system
• Helps prevent water pooling beneath the appliance and potential floor damage
• Works when original tray is cracked, warped, clogged, or missing
• Compatible with factory mounting points and drain alignment when the correct part is used

• One replacement drip tray

• Disconnect power before servicing to avoid electrical shock
• Access may require removing kick plate or lower front panel; follow your model's service instructions
• Slide or snap the tray into place and secure any retaining clips or screws removed earlier

This door closer is the hinge-mounted part that helps a dishwasher door move smoothly and stay aligned for reliable closing. Restores controlled door motion to reduce slamming and improve latch engagement. What it does:

• Guides and cushions the dishwasher door during opening and closing
• Helps the door stay properly aligned so the latch can engage
• Reduces sudden slamming or dropping of the door
• Commonly replaced when the door sags, drops, or closes unevenly

• One door closer assembly as shown

• Disconnect power to the appliance before beginning any repair
• Remove outer door panels or kick plate as needed to access the hinge/closer
• Handle springs and hinge components carefully; parts may be under tension

This door hinge secures and guides a refrigerator door, restoring smooth opening, closing, and proper door alignment. It's a direct-fit replacement designed to help stop door sag, rubbing, or gaps that let cold air escape. What it does:

• Supports the refrigerator door and keeps it aligned on the cabinet
• Allows the door to pivot smoothly when opening or closing
• Helps maintain a proper seal to preserve internal temperature
• Common symptom: door droops, rubs, binds, or won't stay closed

• One door hinge

• Installation requires basic hand tools; follow OEM instructions for correct alignment
• Keep door supported or use a second person while replacing hinges to prevent injury or damage
• Inspect mounting screws and hinge mating surfaces; replace any damaged fasteners

This blower wheel moves air through the appliance's ventilation system so clothes dry evenly and components stay cool. It restores proper airflow to improve drying performance and reduce overheating risk. What it does:

• Spins to circulate air through the drum and exhaust vent for efficient drying
• Replaces a damaged or broken wheel that can cause reduced airflow and long dry times
• Stops abnormal noises from a cracked or out-of-balance impeller
• Helps prevent overheating caused by restricted or insufficient airflow

• Disconnect power (and gas, if applicable) before beginning any repair
• Inspect the mounting shaft, housing, and fasteners; replace any damaged hardware
• Ensure correct wheel orientation and secure fit to avoid vibration or rubbing

This runner, roller and pan assembly restores smooth sliding and stable support for a refrigerator/freezer drawer. It replaces worn or damaged slides so the drawer opens and closes evenly and reduces sticking or misalignment. What it does:

• Provides a rolling track and mounting pan to guide and support the drawer during use
• Replaces worn rollers or bent runners that cause sticking, sagging, or noisy movement
• Helps restore proper alignment so drawers latch and seal correctly
• Compatible with factory mounting points to maintain original fit and function

• One runner, roller and pan assembly as shown

• Remove power and empty the drawer before beginning; follow OEM disassembly steps
• Installation typically requires basic hand tools; retain all factory screws and hardware unless replacement is specified
• Inspect mounting clips and surrounding components for damage; replace any broken fasteners

A small rubber mounting grommet that cushions and protects components where they pass through or sit against a chassis or housing. Replaces worn or damaged grommets to reduce vibration and keep parts properly positioned. What it does:

• Provides a vibration-dampening cushion for mounted parts or wiring
• Protects wires, hoses, and metal edges from abrasion at pass-throughs
• Helps keep components aligned and secure during operation
• Worn or cracked grommets can cause rattling, rubbing noises, or movement of parts

• One replacement rubber grommet

• Disconnect power before starting any repair
• Access may require removing panels or trim—refer to your model's service manual or diagram
• Inspect surrounding parts and replace any additional worn fasteners or seals as needed
• Use appropriate tools and take care not to damage wiring or components when installing

This drive gear transmits motor motion into the washer transmission so the tub can agitate and spin. Replacing a worn or broken drive gear restores proper drivetrain engagement and reduces grinding or slipping symptoms. What it does:

• Transfers rotational force from the motor/shaft to the transmission or agitator assembly
• Stops grinding, slipping, or intermittent agitation caused by damaged gear teeth
• Helps restore normal spin and agitation cycles when drivetrain wear is the cause
• Works as a mechanical replacement part—does not include seals or bearings

• One drive gear

• Disconnect power and water before beginning any repair
• Access requires removing the washer cabinet or transmission cover; follow the manufacturer's service manual
• Inspect adjacent components (shaft, retention clip, seals) and replace if damaged

This replacement roller pan slide keeps the oven broiler/drawer pan rolling smoothly and aligned for reliable operation. It restores proper pan support and helps prevent binding or uneven movement. What it does:

• Provides a smooth sliding surface and support for the oven broiler/drawer pan
• Replaces worn or broken slides that cause sticking, wobbling, or noisy operation
• Helps keep the pan properly aligned so it inserts and removes easily
• Fits into the existing slide/runner assembly to restore normal function

• One roller pan slide

• Remove power to the appliance and allow any hot surfaces to cool before servicing
• Inspect matching slides and mounting hardware; replace both sides if one side is severely worn
• Simple snap-in or screw-mount replacement on many models;

This evaporator clip secures the refrigerator evaporator assembly and related components so the cooling system stays aligned and vibration-free. It helps maintain proper airflow and prevents rubbing or loose parts. What it does:

• Holds the evaporator coil/assembly or associated covers in place
• Prevents vibration, noise, and contact between the coil and cabinet parts
• Helps maintain consistent airflow for reliable cooling performance
• Commonly linked to rattling, buzzing, or loose parts around the freezer evaporator

• Disconnect power before servicing the appliance
• Handle evaporator and surrounding fins carefully; they are sharp and fragile
• Verify clip orientation against the OEM diagram before fastening