Wt4458882 Parts

This holder assembly is a direct replacement mounting bracket that secures refrigerator internal components so they stay properly positioned and function reliably. Replaces a cracked or loose bracket to restore stable support and reduce rattling. What it does

• Secures internal components or assemblies to the cabinet to prevent shifting and vibration
• Restores proper alignment when a cracked or broken holder causes loose parts
• Helps stop rattling, knocking, or intermittent contact caused by a failed mount
• Works as a structural replacement—matches OEM fit and mounting points

• One holder assembly

• Disconnect power (unplug or shut off breaker) before starting any repair
• Remove nearby shelves, bins, or trim for access as needed; keep small fasteners organized
• Typically installs with basic hand tools; do not overtighten fasteners to avoid cracking
• If the part attaches to electrical components, verify connectors are secure before restoring power

The Hose Connector is an OEM part for LG washing machines. It controls the water flow during the wash and rinse cycles. This part is designed to facilitate a secure and leak-proof connection between different sections of the washing machine, such as the inlet valve and the tub, or the pump and the drain hose. Ensuring these connections are secure is vital for the efficient operation of the washing machine, preventing leaks and maintaining optimal water usage.

Causes of failure may involve cracks, splitting, or collapsed seals/gaskets, as well as excessive mineral or foreign deposits that can obstruct water flow.

Symptoms of a bad hose connector are:

• Slow or incomplete filling during wash cycles
• Water leaks at the supply valve or connector area
• Connector split, cracked or compromised fittings

This genuine LG replacement is also compatible with Kenmore washing machines.

This is a main control board for washing machines. This part controls all of the functions of the washing machine. This includes the filling cycle, washing cycle, draining cycle, and spinning cycle. When this part is faulty, the controls will not work as they are supposed to. The buttons may be pressed and nothing will happen. It is also possible that some functions and cycles will work while others won't. Some users report the washing machine shutting down the door locking. A visual inspection of the main control board could also show signs that it has gone bad, such as if there are burn marks on it. Be sure to disconnect the washing machine from its power source prior to attempting to repair or replace any parts. This main control board is compatible with washing machines that are manufactured by the LG brand. This part is sold individually. It is sourced directly from the manufacturer.

This water inlet valve assembly controls the flow of water from the household supply into the appliance during each fill. Replacing a sticking or leaking valve restores proper filling and helps prevent slow-filling, overfilling, or drip-into-tub issues. Also called a fill valve. What it does:

• Opens and closes to allow the correct amount of water into the appliance during the cycle
• Shuts off water flow at the proper time to prevent overfilling
• Helps ensure consistent fill rate for reliable cycle starts
• Common symptoms may include no fill, slow fill, water continuing to enter when off, or fill-related error codes (e.g., IE)

• One water inlet valve assembly

• Disconnect power and shut off the water supply before servicing
• Place a towel to catch residual water; relieve line pressure before removing hoses
• Label and transfer hoses and wire connectors to the new valve in the same positions
• After installation, turn water back on, check for leaks, and run a test fill

The replacement handle bolt here can be used for lawn and garden equipment. The handle bolt is used with the handle knob to help secure the upper and lower handles of the machine together. If the bolt is damaged or missing, it will not be possible to secure the handles properly. The handle bolts are durable and made from metal, but they could become damaged due to corrosion or natural wear. In other cases, they could become lost. In either case, they will need to be replaced. The replacement is simple and will not require any tools, as the square part of the bolt will fit into the handle perfectly. The handle knob will then be used to keep it in place. The handle bolt is a genuine OEM Part for lawn mowers and snowblowers. It is compatible with some models from Husqvarna, Murray, Weed Eater, Poulan, Jonsered, Craftsman, and Ryobi. It should be noted that this product is sold individually, and the handle knob is not included.

This is a handle knob for many brands of lawnmowers, snowblowers, or trimmers. It attaches to the upper or lower handle on adjustment levers. This genuine OEM handle knob is a frequently lost or broken component as it is on the exterior of the machine, used frequently, and often struck during use. It will need to be replaced if it becomes wobbly or refuses to remain firmly in place. The only tools required to install the authentic replacement part will be a rubber mallet and a 1/16 punch. It is threaded to easily install once the cap has been removed with the punch. Made of durable materials, it ships individually but may require the use of a handle bolt depending upon the machine it is being used to repair. It works on rotary lawnmowers as well as manually and self-propelled models from brands like Husqvarna, Poulan, Weed Eater, Ryobi, Murray, and Craftsman, among others.

This inlet hose routes household water into the appliance so it can fill and operate correctly. Replacing a damaged inlet hose restores proper water flow and prevents leaks that can cause poor performance or water damage. What it does:

• Channels incoming water from the household supply into the appliance
• Stops leaks and restores normal fill when the original hose is cracked, split, or worn
• Helps correct symptoms like no water entering the appliance, slow or intermittent fill, or visible leaking at the hose connection
• Works with the appliance's valve and fittings to maintain a sealed water path

• Turn off the water supply and unplug the appliance before starting any work
• Inspect fittings and seals; replace any worn gaskets to ensure a watertight connection
• Hand-tighten connections then check for leaks; avoid overtightening plastic fittings

This replacement part is a spring. This is a genuine replacement part made by Husqvarna. Springs are commonly found in many appliances and assist in connecting certain parts so that the appliance is able to run smoothly. A new spring might be needed if the current one is stripped down or is no longer functioning properly. This can be due to normal wear and tear after years of use. Due to the nature of certain springs, these parts can snap under pressure and should be replaced if this is the case. Work gloves are recommended when replacing this part as this spring is often found close to other dangerous parts. This specific spring is sold individually and is sourced directly from the manufacturer for long-lasting use. This part is a genuine OEM replacement part to ensure proper fit.

This spindle housing assembly is a genuine Husqvarna part, sold individually. This spindle housing assembly can be used as a replacement part for a string trimmer. The purpose of the spindle housing assembly is to provide a casing for the spindle of the string trimmer, which operates as a component that facilitates the rotation of the blades so the appliance can cut through greenery.The spindle housing assembly might have to be replaced if it is compromised or damaged to the point that the spindle is exposed. If the spindle housing assembly is damaged, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This spindle housing assembly is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Weed Eater.

This shoulder bolt is a genuine Husqvarna part, sold individually. This shoulder bolt can be used as a replacement part or a string trimmer. The purpose of a shoulder bolt is to serve as a fastening component of a lawn mower or a string trimmer in conjunction with a nut, so several components within the infrastructure of the appliance are held together and secured in place.The shoulder bolt might be easily lost or misplaced or could be damaged over time. If the shoulder bolt is stripped, the component should be replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. Always unplug the appliance before performing any kind of repair or replacement.This is an OEM part sourced directly from the manufacturer. It is sold individually. This shoulder bolt is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, and Ariens.

This control bar is a genuine Husqvarna part, sold individually. This control bar can be used as a replacement part for a string trimmer. The control bar provides a component for the user to pull down on in conjunction with the handle in order to start up the rotation of the string trimmer; when the control bar is released, the string trimmer ceases rotation.The control bar of a string trimmer might have to be replaced at some point within the lifespan of the appliance if it suffers enough damage to render it without function. If the control bar does not turn on the appliance when it is pulled or if the engine remains powered on and the string trimmer continues to rotate when the control bar is released, the component should be removed and replaced with this genuine OEM replacement part. Remember to wear work gloves as a safety precaution while repairing or replacing parts within an outdoor appliance. This is an OEM part sourced directly from the manufacturer. It is sold individually. This control bar is compatible with the following outdoor appliance brands: Husqvarna, Poulan, and Weed Eater.

This replacement part is a bottom deflector, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. A bottom deflector is found in many types of lawn mowers and essentially protects the user from getting hit with flying grass clippings or debris. This deflector piece is made of quality plastic and ensures that the debris is dismissed out the back of the device. If the user notices that the current bottom deflector is not working properly, it is recommended that it be replaced. If debris or grass clippings are flying up in the user's vision, it could be dangerous as their line of sight can be compromised. Be sure to replace this part as soon as possible if it is malfunctioning or missing. This bottom deflector is sold as a single part. It is also a genuine OEM replacement part and sourced from the manufacturer.

This replacement part is an idler pulley, and it is intended for use in different types of lawn equipment. This is a genuine replacement part made by Husqvarna. This idler pulley is commonly found in weed trimmers and is an important part of this appliance. Idler pulleys provide tension and guide the engine drive belt so that the appliance runs smoothly overall. A new idler pulley might be needed if the machine is not working up to standard or the user notices that the spinning or turning mechanism of the weed trimmer is not working properly. Be sure the machine is powered off before attempting to replace this part as it is located near the engine and can be dangerous. It is also recommended the user wears working gloves for protection. This part is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.

This replacement v-belt is designed for use in select high-wheeled trimmers. The belt is responsible for driving the cutter head, and is sometimes called the drive belt or trimmer drive belt. It attaches to the axle and the cutter and as the belt rotates, it turns the cutter head so that it can do the trimming. Over time, this belt can become worn, stretched, or twisted. This will require a replacement in order to ensure peak performance of the trimmer. With this OEM trimmer v-belt replacement, it will be easy to get back to work. This genuine OEM v-belt is designed for use in trimmers from Husqvarna, Poulan, Craftsman, Roper, and Weed Eater. It is made of durable composite rubber material and includes a one-year warranty from the manufacturer against defects. Replacing the belt requires a screwdriver and pliers. Always allow the engine to cool completely and wear gloves for hand protection. Beware of pinching or crushing injuries when replacing belts and other tensioned parts. This belt is sold individually and does not include any hardware or additional components.

This replacement part is a guide kit. This is a genuine replacement part made by Husqvarna. Guide kits are small parts that connect to the side of a lawnmower to help the user create clean lines during use. The rope is looped through the guide so that the user maintains consistent work. A new guide kit might be needed if the user is unable to maintain clean lines while cutting grass. If the guide loop is worn down and will not hold rope correctly, it might be time to replace the guide kit. This repair should be fairly simple and only require common household tools such as a screwdriver and perhaps pliers if the previous piece is stuck. This is a genuine OEM replacement part. This part is sold individually and is sourced directly from the manufacturer to ensure proper fit.