Wt7150c Parts

This bracket assembly secures and supports internal appliance components, restoring proper alignment and stability to parts that have shifted or come loose. It provides a direct replacement to maintain safe, reliable operation. What it does:

• Provides a sturdy mounting point to keep panels, modules, or assemblies properly positioned
• Helps eliminate rattling, misalignment, or loose component movement
• Restores intended structural support after impact or wear
• Works as a direct-fit replacement to return original fit and function

• One bracket assembly

• Disconnect power (and water, if applicable) before beginning any repair
• Use appropriate tools and keep fasteners for a secure fit; replace damaged screws as needed
• Inspect surrounding components and wiring for damage before reassembly

This damper controls airflow between compartments to help maintain consistent temperatures and efficient cooling. It replaces a worn or failed damper to restore proper air distribution and reduce temperature swings. What it does:

• Regulates airflow between freezer and fresh-food compartments for balanced temperatures
• Can cause uneven cooling or warm fresh-food compartment when faulty
• May click, stick, or fail to open/close if broken or obstructed
• Works with the refrigerator's control system to adjust airflow based on settings

• Disconnect power before beginning any service to avoid electric shock
• Handle the damper and housing carefully to avoid damage to plastic fins or linkage
• Note orientation and actuator connection before removal to ensure correct reassembly
• Test operation after reinstalling by restoring power and cycling temperature controls

This is a factory replacement parts assembly designed to restore proper fit and function of a specific component group in your appliance. Use it to replace a worn, damaged, or missing original assembly and maintain reliable operation. What it does:

• Provides a complete, preassembled component group specified by the manufacturer
• Restores proper alignment, support, and operation of the associated parts
• Helps resolve issues like looseness, rattling, misalignment, or intermittent function
• Direct-fit replacement engineered to match the original design

• One parts assembly

• Disconnect power (and shut off water or gas, if applicable) before servicing
• Refer to your model's service documentation for the exact location and procedure
• Handle sharp edges and components carefully; wear cut-resistant gloves
• Verify correct operation before final reassembly

A replacement holder assembly that secures and supports internal components for proper alignment and operation. Restores stable mounting where the original bracket is cracked, bent, or broken so the appliance runs quietly and reliably. What it does

• Provides a secure mounting point for internal parts that rely on a fixed support
• Prevents rubbing, misalignment, and excess vibration caused by a damaged holder
• Helps restore correct component positioning to improve part interaction and operation
• Commonly used when the original bracket is cracked, worn, or no longer holds parts firmly

• One holder assembly

• Disconnect power before starting any repair; shut off water supply if the repair requires opening plumbing
• Basic hand tools typically required; handle clips and tabs gently to avoid damage
• Inspect adjacent components for wear and replace if needed for a long-lasting repair

The HARNESS, MULTI is an OEM component designed specifically for LG washing machines. As an integrated wiring bundle, it facilitates communication between various washing machine functions simultaneously for coordinated cycles. Smooth signal transmission across motors, controls, and sensors through this custom harness is crucial for optimized cleaning.

Causes of a bad multi-function harness may include pinched or chafed insulation from repeated door openings. Constant vibration could also cause wire fractures or loose connections over extended use. 

Symptoms of a bad multi-function harness include:

• Individual components like agitators or pumps failing to respond  
• Incomplete or ineffective wash cycles from lack of coordination
• Strange noises or behaviors as systems experience disruption
• Inability to control settings or fill/drain water properly

Replace yours today with this genuine LG wiring solution. Smooth, multi-faceted communication restores thorough, gentle washing performance. Compatible with Sears/Kenmore units as well.

The Stator Assembly is an OEM part for LG top load washing machines. As an electrical component, it is responsible for powering the motor that spins the washing drum. The stator contains electromagnetic coils that generate a rotating magnetic field to drive the inner rotor and suspension assembly when energized. 

Symptoms of a bad stator assembly include: 

• The washing machine fails to agitate clothes properly  
• Unusual noises emanating from the motor area
• The drum spins slowly or fails to spin during cycles
• Drive issues arise such as not completing cycles 

Causes can be a failure of coil windings over time, moisture ingress causing electrical shorts or faulty electronic speed/voltage regulation.

This LG replacement part is suitable for Kenmore top-load models as well.

This is a small flat hardware washer used with fasteners to distribute load and prevent loosening on appliance assemblies. It helps keep screws and bolts seated for a secure, stable connection. What it does

• Sits under a screw or bolt head to spread pressure and protect the mating surface
• Helps prevent fasteners from pulling through soft or thin materials
• Reduces loosening from vibration when paired with the correct screw or bolt
• Can eliminate play or rattling where a missing washer allowed movement

• One flat washer as pictured

• Disconnect power before servicing the appliance and follow manufacturer safety instructions
• Replace only with the same style and size washer for proper fit and function
• Hand tools are normally sufficient; ensure fasteners are tightened to the OEM recommendation
• If multiple washers are missing or damaged, inspect surrounding hardware for wear

The Nozzle Assembly is an OEM part for LG washing machines. Located inside the tub, this is the nozzles responsible for directing water spray during cycles.

Causes of a bad nozzle assembly can include clogged or blocked spray ports from residue buildup, cracks or breaks in plastic components from general wear, or damage like dents that disrupt water flow.

Symptoms of a faulty nozzle assembly include:

• Uneven or incomplete water distribution inside the tub
• Reduced spray pressure from certain areas
• Loud vibrations or rattling noises during the wash cycle

This OEM LG part is also compatible with some Kenmore models.

This is a common nut used to secure appliance components and fasteners, restoring a tight connection for safer, quieter operation. Replaces a worn or missing nut to help stop loose panels, rattling, or shifting parts. What it does:

• Secures brackets, panels, or fasteners to keep components properly mounted
• Restores clamping force to prevent vibration-related noise
• Helps stop loose or wobbly parts that can lead to component wear
• Small hardware replacement for routine repairs and reassembly

• Disconnect power and water before starting any repair
• Use the correct socket or wrench size to avoid rounding the nut
• Thread onto matching bolt stud; tighten until snug—do not overtighten
• If threads are damaged, replace both nut and mating fastener

This Top Cover is the outer panel that protects the appliance's internal components and completes the exterior finish. It helps keep dust and debris out while restoring the unit's appearance and structural fit. What it does:

• Covers and protects internal electronics, wiring, and components from dust and foreign objects
• Restores the appliance's exterior finish and alignment for proper door/control fit
• Helps prevent moisture and spills from entering the cabinet area
• Reduces risk of loose or rattling parts caused by a damaged or missing top panel

• Always disconnect power (unplug or switch off breaker) before beginning work
• Basic hand tools are typically required; support the panel during removal/installation to avoid scratches
• Handle edges carefully—panels may have sharp stamped metal edges
• Verify secure attachment and that surrounding trim and seals align after installation

The Agitator is an OEM part for LG washers. It serves a critical cleaning function by scrubbing clothes during the wash cycle through a gentle oscillating motion. The agitator's quality construction, using durable materials, allows it to withstand years of washing loads without degrading its effective scrubbing abilities. 

Causes of a bad agitator can include damage or cracks from large or off-balance loads, corrosion from mineral buildup in hard water areas, or general wear from extended heavy use.

Symptoms of a bad agitator include:

• Ineffective or inadequate cleaning even on light soil loads  
• Excessive vibrations or noise coming from the agitator area
• Visible wear like cracking, bending, or rusting of agitator parts

Replacing a damaged agitator restores the washer's scrubbing performance. This OEM LG part ensures clothes are properly cleansed using the machine's intended washing motion. 

This OEM LG part is also compatible with Kenmore models. 

This bracket assembly secures internal components to the appliance frame, restoring proper alignment and structural support for panels or shelves. Replacing a damaged bracket helps stop rattling, sagging, or misaligned parts for safer operation. What it does:

• Provides a stable mounting point to hold panels, shelves, or other internal parts in place
• Restores proper fit and alignment to reduce noise, vibration, and rubbing
• Prevents further wear by re-securing loose or sagging components
• Works with factory fasteners to maintain original structural support

• One bracket assembly as shown

• Before replacing, unplug the appliance or switch off power at the breaker to avoid electrical hazard
• Use appropriate hand tools; verify bracket orientation against removed part before tightening
• Keep all original screws and clips; only secure to factory mounting points
• If corrosion or additional damage is present, inspect adjacent parts and replace as needed