Wtvc8530uc/10 Fd Parts

Thermister

Supports smooth drum rotation in your dryer. Replace if you hear squeaking, whistling, or rumbling during cycles. Verify fit with your model number.

Replaces worn dryer door seals that allow heat escape or show cracks and tears. Forms protective barrier around opening to maintain efficiency. Verify fit with your dryer model number before ordering.

Dryer door won't stay closed or won't start? A broken door latch is often the cause. This replacement latch is a straightforward 5-10 minute fix.

The Wheel is an OEM part for Bosch clothes dryers. It is an essential component that works with the drum to tumble clothes, facilitating effective drying action during cycles.

Wheels can cause shorts and come loose over time from heavy drum usage, leading to:

• Vibrating, shaking noises 
• Difficulty spinning the dryer drum by hand
• Stretching or pilling of clothes  
• Unerwven drying performance

Causes of a faulty wheel tend to be wear and tear over time from carrying heavy loads inside a spinning drum. Foreign objects inside the drum can also potentially cause damage.

It is also compatible with some Thermador, Gaggenau, and Kenmore dryer models.

The Ignition Device is an OEM part for Bosch dryers. This part ignites the gas in the dryer's burner, initiating the heating process necessary for drying clothes. By generating the spark that lights the burner's gas, it plays a pivotal role in the dryer's operation, contributing to efficient and effective drying cycles.

Causes of a malfunctioning Ignition Device include wear and tear over extended use, buildup of lint and debris affecting the ignition process, and potential damage from electrical surges.  

Symptoms indicating the need for a new ignition device include:

• The dryer fails to heat up, resulting in clothes that remain damp after a cycle.
• A noticeable lack of a sparking sound during the dryer's startup phase.
• Intermittent heating issues, where the dryer occasionally fails to produce heat.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Replacement screw secures appliance panels, brackets, and internal components. Install when original is stripped, missing, or corroded for proper alignment.

Dryer stops mid-cycle or won't heat? This thermal cutoff limiter prevents overheating damage. Requires panel removal to access. Replaces failed limiter.

Replace your worn dryer door sealing strip to restore a tight closure and prevent air leaks, drafts, and odors. Verify fit with your model number.

This fan wheel circulates air through the appliance to support drying and cooling cycles, restoring proper airflow and temperature regulation. Replaces a worn or damaged blower impeller to improve performance and reduce overheating risk. What it does:

• Spins to draw and push air through the appliance's vent and heating chamber.
• Restores airflow when a cracked or warped wheel causes weak drying or poor ventilation.
• Can reduce unusual rattling or grinding noises caused by broken blades or imbalanced rotation.
• Helps prevent overheating by maintaining designed air movement.

• One fan wheel

• Disconnect power (and gas supply, if applicable) before beginning service.
• Access the blower housing; confirm orientation and fit before final assembly.
• Inspect surrounding seals and fasteners; replace any damaged clips or screws to ensure secure mounting.
• If you hear continued noise or airflow problems after install, re-check wheel clearance and shaft/bearing condition.

This factory fastener secures appliance components and panels so they stay aligned and quiet. Replacing a missing, stripped, or corroded screw restores a tight fit and helps prevent vibration, rattling, and premature wear.

• Secures brackets, covers, panels, or internal parts per your model's design
• Helps maintain alignment and reduce vibration/noise during operation
• Replaces lost, stripped, rusted, or damaged hardware
• Common signs include loose or shifting panels, rattling sounds, or a missing screw found during service

• Disconnect power before servicing; shut off water or gas if applicable to your appliance
• Match the screw to the original location/length; replace one at a time to avoid mix-ups
• Start threads by hand to prevent cross-threading; tighten snugly without overtightening
• Use the correct driver for the head type on your model to avoid stripping

The Screw is an OEM part for Bosch microwave ovens. It is a component that secures the outer casing and front paneling of the microwave. The screw is designed to withstand repeated heating and cooling cycles without loosening or degrading. 

Symptoms of bad screw include:

- The front panel or outer casing becoming loose, detached, or misaligned
- Gaps appearing in the seams or joints of the microwave structure
- The door not sealing properly leading to leaks

Over many uses of the microwave, screws can wear down or strip out from over-tightening during repairs or installations. It is important to replace worn screws to ensure the microwave maintains an intact structure.

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
 

Replacement screw for securing panels, brackets, and components in washers, dryers, and other appliances. Needed when original screws are rusted, stripped, or missing.

Adjustable leveling leg supports and balances your dryer during operation. Replace when worn, damaged, or causing wobbling. Confirm fit with model number.

Replacement mounting screw for securing panels, brackets, and trim on appliances. Needed when original fasteners are stripped, missing, or lost.