Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Approx 3 inches in diameter
Ordered a new burner base. Replacement was easy. Read more
Converting your cooktop from natural gas to liquid propane? This LP gas orifice spud enables proper fuel conversion for specific burner positions.
This machine screw is an authentic OEM replacement part sourced directly from the manufacturer. It is used in securing the burner head to the gas range top so that it can be used for cooking. If the burner head becomes loose or the screw is missing, it should be replaced. For safety reasons, the burner should not be used until this screw is replaced; the burner head could shift during cooking and lead to a fire. To start, disconnect the gas and power from the stove to prevent accidental ignition of the burner. Make sure the burners are not hot. Remove the burner grate and burner cap from the burner that is missing a screw. Install the new screw in the hole and tighten it with a screwdriver. Put the burner cap and burner grate back on the stove and reconnect the gas and power. Periodic inspection of the burner heads and all associated screws and parts on the stovetop will prevent accidents and keep the stove working correctly. This screw is a silver, metal part that is sold individually. It is designed for use in gas rangetops manufactured by General Electric and Hotpoint.
Second repair after 10 years of service - igniter had cracked and spill overs were causing the others to misfire. This was a two-step process. I took apart the cooktop to see what parts were neded. Screws were all rusted, I had to drill ome out. The burner gaskets broke during the process and needed replacement. One of the burners had deformed due to excess heat. After that initial diagnose, I reassembled the cooktop without the igniters and ordered all the parts I needed. The second stage was... Read more
Connects cooktop ignition components for reliable spark delivery. Replace this harness if wires are damaged, frayed, melted, or causing connection issues.
Black burner cap for gas cooktops and ranges. Sits on top of the burner head to distribute flame. Replace if cracked, chipped, discolored, or missing.
Burner base installs beneath the burner cap on gas cooktops. Replace if cracked, warped, or dome-shaped to restore proper flame coverage and alignment.
I decided to replace my igniters because I suspected that they were shorted. Due to my recklessness, I was too hard in taking them off and broke a couple. But with Appliance Pro's recommendations, I moved on to treplacing the switch harness assembly. I have to say that the replacement of the switch harness assembly took no more than 30 seconds. It was removing the base burners and the porcelain/cermaic igniters from their bases that took forever. Just a heads up to those amateurs like me, be... Read more
Rubber grommet that seats beneath the burner head on your gas cooktop surface. Replace if cracked, worn, or missing to keep burners level and secure.
Well after looking the issue up on YouTube I first tried the cleaning of the burners no help. So I decided I needed to replace either the harness switch assembly or the spark module. I decided that since I had to remove the glass top and install either and put if all back together before I would know if it worked, I just did both at once since it seemed it had to be one or the other. Got the parts ordered for the correct model, turned off the gas and pulled the top. Took about 90 minutes,... Read more
Burner base for gas cooktops, secures to cooktop surface and holds igniter assembly. Replace if cracked, broken, or damaged during repairs.
Natural gas orifice spud for cooktop burner assembly. Needed when converting from LP to natural gas or replacing damaged orifice threading.
Replaced orifices. Read more
Black. B Burner
Burner orifice spud for cooktop or range. Installs in burner assembly to regulate gas flow. Replace if damaged, worn, or converting between fuel types.
Replacement mounting screw secures panels, brackets, and controls on ranges and ovens. Needed when original screws are missing, stripped, or damaged.
Replace a worn, damaged, or missing burner orifice spud on your cooktop. This small threaded fitting controls gas flow to the burner for proper operation.
Replacement mounting screw for securing panels, trim, and brackets on ranges. Needed when original screws are missing, stripped, or damaged during repairs.
Seals and protects the cooktop control panel from moisture and debris. Replace if worn, cracked, or loose to prevent damage. Verify fit with your model number.
Black burner cap for gas cooktops. Sits atop the burner head to distribute flame evenly. Replace if cracked, chipped, or missing for proper cooking.
Usually ships within 4 - 14 days