Zis480d Parts

This door push-button light switch controls the refrigerator/freezer interior lamp when the door opens and closes, restoring reliable lighting and proper light-off behavior. Fits common top-mount and side-mounted interior light housings. What it does:

• Opens or closes the light circuit when the door is opened or closed
• Replaces a switch that fails to turn the interior lamp on
• Stops the light from staying on when the door is closed (prevents unnecessary run time)
• Restores normal door-sill light operation and user visibility inside the compartment

• One door push-button light switch

• Disconnect power to the appliance before beginning work to avoid shock
• Typically accessed by removing the light lens or door switch bezel; may be snap-fit or secured with screws
• Observe and reconnect the wire terminals to the same positions; use needle-nose pliers if needed

This is a replacement rocker-style light switch that restores interior appliance lighting control so lights turn on and off reliably. Designed to match OEM fit and function for compatible GE appliances. What it does

• Replaces a worn or failed rocker light switch so the interior light responds correctly
• Common fix when the light stays off, flickers, or only works intermittently
• Provides the same on/off switching action and terminal connections as the original
• Works with the appliance's existing wiring and mounting locations

• One rocker-style light switch

• Disconnect power to the appliance before starting — unplug or turn off the circuit breaker
• Remove only the panels necessary to access the failed switch; keep track of fasteners and wire positions
• Confirm wiring and switch orientation match the old switch; labeling photos can help during reassembly

The Light Transformer is an OEM replacement part for GE refrigerators. It is responsible for supplying power to the refrigerator's lighting system, ensuring that the interior is properly illuminated.

A bad transformer can occur due to various factors, including electrical malfunctions, power surges, or general wear and tear. If you notice symptoms such as flickering lights, dim lighting, or complete failure of the refrigerator lights, it may indicate a need to replace the transformer.

Symptoms of a bad transformer include:

• Flickering lights
• Dim lighting
• Complete failure of refrigerator lights

Restore your refrigerator by replacing the faulty transformer with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This replacement ice bin door track guides the dispenser door or ice bin slide so the ice chute opens and closes smoothly, helping restore proper ice dispensing and reduce jams or binding. What it does:

• Provides the sliding/tongue surface for the ice bin door to move smoothly.
• Restores proper alignment when the dispenser door sticks or drags.
• Helps stop the ice bin door from binding or catching during operation.
• Useful when worn, cracked, or damaged track edges cause noisy or uneven motion.

• Disconnect power to the refrigerator before beginning any repair.
• Inspect surrounding trim and fasteners; replace any stripped screws to ensure secure fit.
• Installation typically requires basic hand tools; handle plastic parts carefully to avoid cracking.

Slide for both right and left sides. 1 per package.

The MWF Bypass is an OEM replacement part for GE refrigerators. Located within the bottom freezer compartment, the metal water filter bypass fitted assembly is responsible for directing filtered or unfiltered water flow to the ice maker and dispenser.

Causes for replacement may include faulty diverter components obstructing water flow to selections or resulting in water leaks.

Symptoms of a problematic bypass unit include:

• Inability to select filtered or unfiltered water from the dispenser
• Ice maker failure due to lack of water or poor water quality
• Mineral deposits accumulating on internal parts from unfiltered water

This OEM replacement bypass is compatible with GE, Hotpoint, and Profile model refrigerators.

This replacement door gasket seals the perimeter of a side-by-side refrigerator door to keep cold air in and humidity out. Replacing a worn gasket restores a proper seal to help maintain stable temperatures and reduce frost and condensation.

• Creates an airtight seal between the door and cabinet to maintain set temperatures
• Helps prevent frost/ice buildup and sweating around the door opening
• Can resolve doors that won't fully seal or show visible gaps
• Replaces gaskets that are torn, cracked, shrunken, or warped

• Unplug the refrigerator; let the new gasket warm to room temperature. Soak in warm water if needed to relax folds.
• Remove the old gasket. Starting at the corners, press the new gasket fully into the door channel all the way around.
• Use low heat (hair dryer) sparingly to smooth waves and improve the seal—do not overheat.
• Adjust door alignment if necessary.

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This water filter manifold is the assembly the MWF cartridge locks into, sealing the connection and routing water through the filter to your dispenser and icemaker. Replacing a worn manifold can stop leaks and restore normal water flow. What it does:

• Holds and seals the MWF water filter cartridge
• Directs filtered water to the dispenser and icemaker
• Can help resolve leaks at the filter head, slow/low flow, or no water/ice
• Addresses issues where the filter won't seat or keeps popping out

• 1 water filter manifold assembly

• Unplug the refrigerator and shut off the water supply; dispense water to relieve pressure
• Keep a towel handy for residual water and take photos to note tube routing before removal
• Fully seat tubing and connections during reassembly; ensure the filter locks in securely
• Restore water and power, then check for leaks and run water to purge air

The Refrigerator Main Control Board is an OEM replacement part for GE refrigerators. It is located inside the fresh food compartment and regulates critical functions through electronic controls and sensors.

Symptoms of a bad main control board include:

• Lights, temperature settings, or features failing to operate as expected   
• Error codes or failure indications on the digital display  
• The entire refrigerator fails to power on or function normally

Causes can be short circuits, water or moisture damage over time, wiring failures, or normal component degradation after years of operation. 

This OEM GE board is also compatible with Hotpoint, RCA, and some Kenmore models.

The Drain Pan and Heater Assembly is an OEM part for GE refrigerators. Located beneath the fridge’s evaporator coil, this pan collects condensed moisture that forms during normal operation. An integrated electric heating element prevents drain line freezing in cold environments.

Causes of a bad drain pan can include mineral buildup clogging drain hole fittings or cracks developing from constant temperature cycling. The heater coil may fail after years of heating moisture evaporation.

Symptoms include:

• Puddles of water under the fridge 
• Ice accumulation inside the pan hindering evaporation
• Non-functioning heater results in frozen or blocked drain line

This GE OEM replacement restores reliable moisture drainage with corrosion-resistant materials. The integrated automatic heater defrosts lines as needed to avoid backups or leaks from frozen condensate. Counts as an upgrade for GE and select Hotpoint or RCA side-by-side refrigeration models.

The Main Control Board Assembly is an OEM replacement part for GE refrigerators. This control board manages tasks such as temperature control, defrost cycles, and compressor operation, ensuring optimal cooling performance and energy efficiency.

A bad main control board assembly can occur due to electrical issues, component failure, or damage to the board itself. If you notice symptoms such as erratic temperature readings, frequent cycling of the compressor, or unresponsive functions, it may indicate a need to replace the control board assembly.

Symptoms of a bad main control board assembly include:

• Erratic temperature readings
• Frequent cycling of the compressor
• Unresponsive functions

Restore your refrigerator by replacing the faulty main control board assembly with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This inner drawer slide guides and supports a refrigerator drawer/bin so it opens and closes smoothly. Replacing a worn or cracked slide restores proper alignment and easy, consistent movement of the drawer.

• Provides guided travel for the drawer along the cabinet rails
• Helps keep the drawer level and properly aligned to prevent binding
• Replace if the drawer sticks, grinds, jumps track, or won't close fully
• Visible cracks, broken tabs, or excessive wobble indicate a failed slide

• Unplug the refrigerator before servicing; remove the drawer and its contents
• Note the orientation of the old slide and reuse the existing mounting hardware
• Install the new slide in the same position; tighten screws evenly without overtightening
• Test drawer movement and ensure it seats flush and glides smoothly end to end

The Drier is an OEM component specifically designed for GE combination refrigerator-freezers. Absorbing moisture, its treated silica particles buffer humidity within refrigerant lines. Proper drying sustains energy-efficient performance while preventing corrosion.

Causes of a faulty drier commonly relate to saturation reducing capacity. As desiccant degrades, water passes into closed system compressors requiring change. 

Symptoms of a bad drier involve:

• Frost and ice buildup impairing cooling  
• Puddling around evaporator evidencing leaks
• Higher operating costs from impaired efficiency

Causes of a bad drier involve typical saturation shortening drying cycles. Cracks release desiccant particles risking blockages necessitating timely replacement.

This OEM GE part is also compatible with some Hotpoint, RCA, and Frigidaire combination units. Replace to retain steady humidity management protecting components and maximizing freshness years of operation.
 

This icemaker fan motor circulates air around the icemaker assembly to help ice freeze evenly and prevent clumping. Replacing a failed fan restores proper airflow for reliable ice production and consistent cube quality. What it does:

• Moves cold air across the icemaker and ice bin to maintain even freezing
• Helps prevent ice from forming large clumps or partial cubes
• Reduces frost buildup around the icemaker area when operating correctly
• Supports proper operation when the icemaker runs but ice production is poor or irregular

• Disconnect power to the appliance before inspecting or replacing the fan
• Access may require removing interior panels or the icemaker assembly
• Handle the fan blades and motor carefully to avoid bending blades or damaging the connector

Has 3 mounting slots for adjustability. Works with toe kick WR74X35045 which has 3 round mounting holes.