Float Switch Float Parts

Best Seller

Genuine Whirlpool part

Washer Water Level Pressure Switch

By: Whirlpool

Part Number: W10339251

Fix a washer that overfills, won't fill to the right level, or floods. This water level pressure switch monitors tub water. DIY install in 1 hour.

This part fixes the following symptoms

Will not fill with water

Do-It-Yourself Stories from Customers like You Water level control wouldn't work Micheal W. • Millville , UT • April 11, 2014

I replaced it and the new one fit perfectly. reassembled and fired it up. Worked as desired, like new... Read more

$130.95

Compare At:: $155.83
You Save:: $24.88

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Range Infinite Control Switch

4.8 (20)

By: Ge

Part Number: WB24T10063

Fix a burner stuck on high or not heating with this infinite control switch. Common cause when burners won't adjust temperature. DIY repair in 20 minutes.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You Burner only worked on high setting Alejandro G. • East Meadow , NY • February 15, 2016

Ordered recommended part for GE appliance. Change was very simple. Followed instructions on video and removed one wire at a time. Very easy to change 5 to 10 minutes. Read more

$84.95

Compare At:: $101.09
You Save:: $16.14

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Dishwasher Float Switch Kit

4.5 (11)

By: Whirlpool

Part Number: 8193506

Dishwasher leaking from underneath? The float switch kit controls water level and stops overfilling. Typical repair time 10-30 minutes.

Do-It-Yourself Stories from Customers like You Kitchenaid dishwasher kudp02frss2 leak at float switch at front right of unit Richard B. • Mahwah , NJ • December 02, 2016

Removed bottom cover, located leak at float switch, removed and replaced float switch kit. The toughest part of the repair was removing the Float & Retainer Assembly (in the interior of the machine tank) which broke when I pushed it back and pulled it straight up as suggested in the service manual. The Float Switch Kit (attached to, and below the float, below and outside the tank) has a folding plastic cover which fastens with plastic clips. If you open the switch kit before removing the... Read more

$92.63

Compare At:: $110.23
You Save:: $17.60

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Samsung part

Washer Water Level Pressure Switch

5.0 (26)

By: Samsung

Part Number: DC96-01703C

Washer overfilling or not filling properly? The water level pressure switch controls fill cycles. Easy 15-minute DIY repair with our video guide.

This part fixes the following symptoms

Will not stop filling with water

Do-It-Yourself Stories from Customers like You Samsung clothes washer wa456 code ie u6 John D. • Howard Beach , NY • February 28, 2015

This error code indicated faulty water level and wash cycles were exhibiting either no water or too much water. Saw utube vid using this part for this type of problem and so far the repair is working well. Part arrived in 2 days, it was the right part and the machine is working the way its supposed to so I'm very happy. The worst scenario would have been to hire a repair guy to rip me off for a "Johnson Rod" I didn't need. Read more

$90.95

Compare At:: $109.14
You Save:: $18.19

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Electric Range Dual Element Infinite Switch

5.0 (15)

By: Frigidaire

Part Number: 318191023

If your dual burner stays on low and won't turn off, or the small element doesn't heat, this infinite switch may need replacing. DIY-friendly repair.

Do-It-Yourself Stories from Customers like You Large element was very erratic on temperature low/high. Rodney C. • Lake Wales , FL • March 01, 2018

Replaced the infinite, dual, switch. Very good instructional video for Safety, removal * install. Read more

$55.22

Compare At:: $65.71
You Save:: $10.49

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Return Switch

4.7 (16)

By: Ge

Part Number: WC21X20249

The Return Switch is an OEM part for GE trash compactors. This part ensures that the compacting ram returns to its starting position after each compaction cycle.

Causes of a malfunctioning return switch can vary from electrical issues, such as short circuits or worn-out connections, to mechanical problems, including physical damage from wear and tear or blockages preventing the switch's activation.

Symptoms of a faulty Return Switch include:

The compactor ram fails to return to its original position after a compaction cycle.
The unit does not start or operate correctly, indicating issues with the cycle initiation.
Unusual noises or behavior from the trash compactor, suggesting that the ram is not aligning or moving as expected.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The trash compactor would not cycle without me holding kick plate up for whole cycle when it did get back to the top of the cycle it would only stop if i opened the door Mike D. • Pine Mountain , GA • December 15, 2014

TALKED TO YOUR REPRESENTATIVE AND WE WENT THROUGH ALL THE ON/OFF AND LIMIT SWITCHS. NARROWED IT DOWN TO TWO SWITCHS. THE ON/OFF SWITCH AND THE LIMIT SWITCH ON THE DOWN CYCLE SIDE. REPLACED ON/OFF AND DETERMINED THAT THAT WAS NOT THE ISSUE. THEN UNCOVERED LIMIT SWITCHS AND REPLACE DOWN SWITCH, FIXING THE PROBLEM Read more

$10.77

Compare At:: $12.82
You Save:: $2.05

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Cooktop Infinite Switch

5.0 (25)

By: Whirlpool

Part Number: WP9759474

Burner stuck on high heat or won't regulate temperature? This infinite switch controls heat levels on your cooktop. DIY repair in 20-30 minutes.

Do-It-Yourself Stories from Customers like You One of the burners would stay on max heat no matter what heat setting was selected Ismael C. • Amherst , OH • March 14, 2015

I replaced the Infinite switch on the cooktop panel and that corrected the problem. Read more

$82.95

Compare At:: $99.54
You Save:: $16.59

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Range Top Burner Infinite Switch

4.6 (22)

By: Whirlpool

Part Number: W11120795

Fix a burner that won't heat, stays hot, or can't adjust temperature. This infinite switch controls power levels. Simple DIY repair in 5-10 minutes.

Do-It-Yourself Stories from Customers like You Stem broke off on surface unit switch Robert Z. • Hampstead , MD • July 09, 2016

Replaced switch with a new one. also replaced the 4 knobs Read more

$73.95

Compare At:: $88.00
You Save:: $14.05

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Dryer Timer Resistor

5.0 (7)

By: Ge

Part Number: WE4M255

Fix a dryer timer that won't advance or automatic cycles that stopped working. This timer resistor regulates cycle duration. Easy 15-minute repair.

Do-It-Yourself Stories from Customers like You Dryer would not shut off at end of any cycle Jeffrey S. • Davis , CA • January 15, 2018

I Replaced the power resistor. The old resistor had a small burnt spot and tested infinity for resistance.The terminals were too small so I had to make new connector. Any 5000 ohm ceramic filled resistor would have worked also. Read more

$32.95

Compare At:: $39.21
You Save:: $6.26

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Washer Rotary Temperature Switch

4.8 (29)

By: Ge

Part Number: WH12X10498

Fix a washer that won't fill with hot or cold water. This rotary temperature switch controls water temperature settings. Easy 5-minute DIY repair.

This part fixes the following symptoms

No hot or cold water
Will not fill with water

Do-It-Yourself Stories from Customers like You No hot water would fill the washer in any cycle or temperature setting if the temperature setting was set to "hot" absolutely nothing would happen when turned on (cold washes worked fine) William H. • St Louis , MO • December 30, 2014

Replaced the water temperature selector switch. After watching a YouTube video for our GE top loading washer showing the switch replacement, I replace the switch in under 5 minutes! Very easy! Read more

$18.95

Compare At:: $22.55
You Save:: $3.60

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Filter Ball

4.9 (7)

By: Ge

Part Number: WD12X10408

The Filter Ball is an OEM replacement part for GE dishwashers. As a key internal filtration component, it helps trap and remove food soils and other residue from washing water to maintain hygienic cleanliness standards.

Causes of a bad filter ball can include worn filter mesh that no longer adequately strains soils or substances that pass through more readily over time.

Symptoms of a bad filter ball include:

Dirty wash water that fails to fully sanitize dishes
Cloudy rinse water that leaves behind streaks and residue
Excess food debris collecting in drainage areas

This GE replacement filter ball is also compatible with some Hotpoint, RCA, and Kenmore dishwashers.

Do-It-Yourself Stories from Customers like You Dishwasher was not draining good Stan C. • Aberdeen , WA • January 18, 2017

Replaced sump and related pieces. Also replaced door baffles that were getting bad. The hardest part of job was removing the dishwasher from the its spot in cabinets. The info on site made replacing parts easy. Read more

$18.73

Compare At:: $22.48
You Save:: $3.75

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Bosch part

Potentiometer

4.8 (13)

By: Bosch

Part Number: 00422748

The Potentiometer is an OEM replacement part for Bosch gas range or cooktops. It functions as a three-terminal resistor that adjusts the flow of electric current, which in turn, controls the ignition and temperature of the cooktop. This component is essential for the precise operation and control of the gas burners, ensuring they light up and maintain the desired flame intensity.

Causes of a malfunctioning Potentiometer can be attributed to wear and tear, electrical issues, or damage due to spills and cleaning products. A compromised potentiometer affects the flow of electric current, leading to issues with the ignition and temperature control of the gas burners.

Symptoms of a bad Potentiometer include:

The cooktop not lighting or staying lit
The ignitor continuously clicking without igniting the burner
Inability to adjust the flame intensity or temperature accurately

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

Do-It-Yourself Stories from Customers like You One burner on my thermador cooktop (pcs484ccus) would not light Kinn K. • Haslet , TX • June 08, 2015

After watching a youtube video, I disassembled the front cover on the cooktop (be sure to turn off the power supply). I then switched the potentiometers on two burners. The burner that was not working now worked and the burner that did work did not. Easy to find the culprit....ordered a new potentiometer from here and though I only got regular shipping, it was actually delivered the NEXT DAY! 5 minutes, put in the new part, and all burners work. Great site, thanks for the help! Read more

$56.95

Compare At:: $67.77
You Save:: $10.82

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Door Switch

4.8 (20)

By: Frigidaire

Part Number: 134813601

The Door Switch is an OEM part for Frigidaire dryers. This part ensures that the dryer operates safely by only allowing the machine to run when the door is completely closed. Positioned typically at the door frame, the switch activates when the door is shut, signaling the control system that it's safe to begin the cycle.

Over time, door switches can wear out or become damaged, which can interfere with the normal operation of the dryer.

Symptoms of a faulty Door Switch include:

The dryer not starting when the door is closed.
The dryer stopping unexpectedly, which might be due to a loose or faulty switch.
A lack of the usual "click" sound that indicates the door has latched properly, suggesting the switch isn’t engaging.
The dryer continuing to run when the door is opened, which poses a significant safety risk.

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer will start, run for a few second, then turn off. No error codes John M. • Waikoloa , HI • April 03, 2014

By reading the forums I first thought it may be the thermostat. I bypassed the thermostat wiring and the dryer still turned off after a few second of running. The second check was for the door switch. I couldn't find an explanation of how to bypass, so I just ordered a new one to try. It worked. Read more

$27.95

Compare At:: $33.26
You Save:: $5.31

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Switch-Pts

4.7 (3)

By: Whirlpool

Part Number: WPW10420741

The Push to Start Switch is an OEM replacement part for Whirlpool dryers. Located on the control panel, it allows the user to initiate the drying cycle with the push of a button. This switch is designed to withstand the repetitive motions of starting countless loads over the dryer's lifespan.

Causes can be gradual wear of internal components like contact pads from activations, or moisture intrusion corroding circuit pathways over time.

Symptoms of a faulty push-to-start switch include:

The dryer failing to start even when powered on
Inconsistent or intermittent operation of the start button
The dryer starting unintentionally without input

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

Do-It-Yourself Stories from Customers like You The push start button didn't start the dryer Kirsten K. • Fayetteville , NC • July 21, 2016

I replaced the part i ordered and it worked great! Read more

$27.37

Compare At:: $32.30
You Save:: $4.93

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Washer Lid Switch Kit

4.9 (53)

By: Whirlpool

Part Number: 12001908

Fixes washer that won't agitate, spin, or start. If your washer stops mid-cycle or won't run with lid closed, this lid switch kit restores operation.

This part fixes the following symptoms

Will not fill with water
Won't start

Do-It-Yourself Stories from Customers like You Washer would not turn on Anthony W. • Washington , DC • October 23, 2014

No water, no electricity, nothing happened when I pulled the on knob. I replaced the lid switch. The switch arrived at my house super fast - ordered on Friday and was there on Saturday. The whole replacement process took no time at all. Read more

$46.35

Compare At:: $55.62
You Save:: $9.27

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Range Surface Element Switch

4.0 (1)

By: Ge

Part Number: WB24T10022

Burner not heating or stuck on? This surface element switch controls power to your cooktop burners. Common repair when heat won't adjust properly.

Do-It-Yourself Stories from Customers like You Burner didn't work Larry W. • Aiea , HI • March 23, 2014

Replaced the switch infin by watching the video Read more

$105.95

Compare At:: $126.08
You Save:: $20.13

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Float Switch Float Parts

Washer Water Level Pressure Switch

Range Infinite Control Switch

Dishwasher Float Switch Kit

Washer Water Level Pressure Switch

Electric Range Dual Element Infinite Switch

Return Switch

Cooktop Infinite Switch

Range Top Burner Infinite Switch

Dryer Timer Resistor

Washer Rotary Temperature Switch

Filter Ball

Potentiometer

Door Switch

Switch-Pts

Washer Lid Switch Kit

Range Surface Element Switch

Appliance Type

Brands