Grill Parts

This grill vent replaces the front vent grille that directs airflow and covers the oven/range vent opening for a clean appearance. It restores proper airflow routing and keeps debris out of the vent area. What it does:

• Covers and protects the appliance vent opening while directing exhaust airflow
• Helps prevent grease and food debris from entering internal vent passages
• Worn, cracked or missing vents can cause visible gaps, rattling or trapped odors
• Restores the appliance's finished appearance and helps maintain proper ventilation

• Disconnect power to the appliance before starting any repair
• Handle part carefully to avoid scratching the finish; a non-marring tool may be helpful
• Installation usually requires removing the lower access panel or front trim—keep fasteners organized

Qty: 1 (order quantity needed)

This cast side grate provides a sturdy, heat-resistant cooking surface for a gas range burner, helping support cookware and maintain proper flame contact for even cooking. Ideal when an original grate is cracked, warped, or missing. What it does:

• Replaces a damaged or missing side grate to restore proper cookware support and burner clearance
• Maintains correct distance between cookware and flame for consistent heating
• Resists high heat and surface wear typical of everyday stovetop use
• Helps prevent pans from tipping or sliding on the cooktop

• Install on a cooled, unlit cooktop; ensure the grate sits flat and stable over the burner
• No special tools required; lift out the old grate and position the replacement
• Verify burner head components are correctly seated before use
• If burner operation or flame shape changes after installation, turn off the appliance and inspect

This cooktop grate assembly replaces a damaged or missing stove grate to restore a stable surface for pots and pans and ensure even cooking. Designed to sit over the burner area and support cookware during use. What it does:

• Supports cookware over the burner for safe, steady cooking
• Keeps pots and pans level to reduce tipping and spilling
• Restores proper clearance above burners for consistent flame pattern
• Replaces cracked, broken, warped, or missing grates that cause instability

• Allow the cooktop to be completely cool before replacing the grate
• Remove any old grate and set the new grate into position; ensure feet/locating tabs sit flush
• No special tools typically required; follow your appliance manual for model-specific guidance

This center cooktop grate replaces a damaged or missing center grate to restore stable support for cookware and proper burner coverage. It helps keep pots and pans level and protects the burner area for even cooking. What it does:

• Provides a stable, centered cooking surface over the cooktop burners
• Keeps cookware properly positioned for consistent heating and flame coverage
• Replaces cracked, chipped, or warped grates that cause wobbling or uneven cooking
• Helps prevent cookware from contacting the burner cap or igniter

• One center cooktop grate

• Ensure the range is completely cool and all controls are off before handling
• Remove the old grate by lifting straight up; set the new grate into place so it seats flat
• No tools are typically required; inspect for proper alignment before use
• Clean with mild detergent and avoid abrasive cleaners that can damage the finish

Color: Gray.

Replace a damaged or unsteady cooking surface with this burner grate. It supports pots and pans at the proper height above the burner, restoring stable, level support on your gas cooktop or range when the original grate is worn or broken.

• Provides sturdy support for cookware over the surface burner
• Maintains the correct clearance between burner and pan for consistent heating
• Replaces grates that are cracked, bent/warped, or have worn feet causing wobble
• Helps prevent rocking or instability of pots and pans during cooking

• Allow the cooktop/range and grate to cool completely before handling
• Lift off the old grate; clean the surface; align and place the new grate over the correct burner
• Ensure the grate sits flat and stable—do not force into place
• Refer to your owner's manual for care and cleaning recommendations

Color: Black

This stainless steel 48 in toe kick replaces the lower front panel on compatible refrigerators to restore a clean, finished look and protect the base of the appliance from scuffs and dirt. Durable, visible finish matches stainless models. What it does:

• Covers the refrigerator kickspace for a finished appearance and to protect the lower cabinet area
• Helps prevent dirt, dust and small objects from entering the appliance base
• Restores damaged or dented front trim that affects the look of the appliance
• Works with existing mounting points and grille assemblies on compatible units

• Remove the existing toe kick/grille per your appliance service instructions before installing
• Align panel to factory mounting clips or screw holes and secure using original fasteners
• No electrical disconnection required for the toe kick itself, but follow safety procedures if working near powered components
• Handle with care to avoid scratches; use gloves and a soft surface during installation

This burner grate replaces a worn or damaged grate on a gas cooktop to provide a stable surface for pots and pans and restore even cooking performance. Durable cast construction supports cookware and resists heat. What it does

• Supports cookware over the burner for safe, stable cooking.
• Maintains proper pan height for even heat distribution.
• Replaces chipped, cracked, or misshapen grates that can cause wobbling.
• Helps keep flames properly centered under cookware for consistent cooking.

• One replacement burner grate.

• Allow cooktop to cool completely and turn all gas and electrical supplies off before starting.
• Lift out the old grate and set the new grate into place—no tools usually required.
• Ensure the grate sits flat and stable; do not force or bend the grate into position.

This is a burner grate for stoves and ranges. It sits on top of the burner head and acts as protection for that part. It's made of durable metal to handle the high temperatures of the stove and the weight of large pots and pans. Burner grates are wider than the burner and create a more stable area for cooking needs. There are several situations where one or more burner grates need to be replaced. The parts may become rusty, cracked, or broken and are no longer appropriate for use.Before the replacement, unplug the stove and make sure any utilities are disconnected from the appliance. The stove should be cool to the touch before starting. This is an easy replacement process that doesn't necessitate tools. However, a pair of work gloves will be useful. Access the burner grate that is cracked or broken and grasp it with the hands. Pull the broken grate off of the range. Use the new burner grate to replace it.This is a genuine OEM replacement part that is compatible with Frigidaire ranges and stoves. It comes directly from the manufacturer and is priced as a single unit.

This grille assembly replaces a damaged or missing vent trim to restore a clean, finished appearance and help direct airflow. It snaps or screws into place for a secure fit and visible cosmetic repair. What it does:

• Covers and protects the vent/air opening while improving the appliance's appearance
• Helps channel airflow from the vent area for proper exhaust or intake
• Prevents large debris from entering the vent opening and interfering with components
• Fixes symptoms such as cracked, broken, loose, or missing front/vent trim

• Disconnect power to the appliance before attempting removal or installation.
• Most installations require removing a few screws or releasing retention clips; keep fasteners for reuse.
• Handle carefully to avoid scratching the finish; align tabs or screw holes before tightening.

This wok ring is a burner accessory that stabilizes round-bottom woks on gas range grates, letting you use wok-style cookware safely and maintain even heating. Durable design keeps cookware centered over the flame. What it does:

• Supports round-bottom woks and small, curved cookware on a gas burner
• Helps keep cookware stable to prevent tipping and uneven cooking
• Places the wok closer to the flame for improved heat contact
• Fits into the burner grate without tools for simple placement

• Install only on a compatible gas range grate; ensure the range is off and cool before placing the ring
• Position the ring securely in the grate recess so the wok sits level over the burner
• Inspect for cracks or warping; replace if damaged to avoid instability

Color: Gray.