Gear Parts

This tub wheel mounts to the dishwasher's inner tub wall and guides the rack as it slides in and out. Replacing a worn wheel restores smooth rack movement and helps prevent binding, derailing, and scraping.

• Attaches to the tub to support and guide rack travel
• Helps keep the rack aligned on its tracks for smooth operation
• Typical failure symptoms: rack hard to slide, rack jumps off track or tilts, scraping/grinding noises, cracked or missing wheel
• Restores proper glide and reduces strain on rack components

• Disconnect power and water supply before servicing the appliance
• Remove the rack for access; release the old wheel's clip/fastener from the tub and install the new wheel
• Ensure the wheel spins freely and the rack moves smoothly end-to-end
• Inspect other wheels and related hardware and replace as needed for even wear

The Dishrack Roller Assembly is an OEM part for LG dishwashers. This assembly features wheels that the upper dishrack glides on smoothly during each wash cycle.

Causes for a bad assembly can include worn or damaged rollers that do not spin freely. Over time and prolonged use, harsh detergents may also corrode roller mechanics.

Symptoms of a bad dishrack roller assembly include:

• The upper dishrack getting stuck and not fully extending
• Difficulty loading or unloading the top rack
• Excess friction causes noisy operation

Scratches or damage to dishes from tight rollers
This OEM LG part is also compatible with some Kenmore models.

This genuine oven rack restores interior cooking space and provides a stable, ventilated shelf for cookware. It replaces worn, bent, or missing racks so pans slide in and out smoothly for even cooking. What it does:

• Provides a sturdy support surface for cookware and bakeware
• Keeps food elevated for even air circulation and consistent baking
• Replaces damaged or warped racks that can cause uneven cooking or sticking
• Slides on existing oven rack guides for easy positioning

• Remove all oven shelves and allow the oven to cool before installing
• Slide the rack into the oven on the designated rack supports until fully seated
• No special tools required; check that the rack moves smoothly and sits level
• For safety, avoid leaning on racks or using them to support heavy loads beyond the oven's capacity

A straight replacement support rod used to secure or guide moving components in compatible laundry and kitchen appliances. Replaces a worn, bent, or broken rod to restore proper alignment and part movement. What it does:

• Provides structural support or alignment for linked components that rely on a straight mounting or guide pin.
• Restores smooth operation when the original rod is bent, broken, or missing.
• Helps eliminate binding, misalignment, or abnormal movement caused by a damaged rod.
• Works as a direct-fit replacement when the OEM part number matches your appliance.

• One replacement support rod (quantity: 1)

• Inspect surrounding brackets, clips, and fasteners for damage and replace if needed; rod ships alone.
• Turn off and unplug the appliance before attempting any repairs to avoid electrical shock or injury.
• Use basic hand tools; some disassembly may be required to access and remove the old rod.

This drive gear transmits motor motion into the washer transmission so the tub can agitate and spin. Replacing a worn or broken drive gear restores proper drivetrain engagement and reduces grinding or slipping symptoms. What it does:

• Transfers rotational force from the motor/shaft to the transmission or agitator assembly
• Stops grinding, slipping, or intermittent agitation caused by damaged gear teeth
• Helps restore normal spin and agitation cycles when drivetrain wear is the cause
• Works as a mechanical replacement part—does not include seals or bearings

• One drive gear

• Disconnect power and water before beginning any repair
• Access requires removing the washer cabinet or transmission cover; follow the manufacturer's service manual
• Inspect adjacent components (shaft, retention clip, seals) and replace if damaged

This shear pin secures the washer agitator to the drive shaft and protects the transmission by designed failure when the agitator binds. It's a small, low-cost part that prevents costly gear or motor damage. What it does:

• Locks the agitator to the drive shaft so the washer can agitate and spin
• Designed to break (shear) if the agitator is jammed, preventing transmission or motor damage
• Commonly replaced when the agitator spins freely or the washer won't agitate
• Small part that restores proper mechanical coupling between agitator and drive

• One shear pin

• Disconnect power and water before starting any repair
• Access usually requires removing the agitator; follow your model's service instructions
• Verify shaft and agitator mating surfaces for wear or damage and replace if needed

A replacement auxiliary burner holder for gas/electric cooktops that secures the small heating element or burner cap for stable, even cooking. Restores proper support and alignment for auxiliary burners. What it does:

• Holds and centers the auxiliary burner or element cap on the cooktop for reliable heat contact
• Helps prevent burner wobble, misalignment, and uneven heating
• Supports safe, consistent pan placement on the auxiliary cooking zone
• Fits into the cooktop assembly where the auxiliary burner is mounted

• One auxiliary burner holder (1 count)

• Basic part; remove burner cap/element and replace holder per appliance disassembly steps
• Turn off power and/or gas and disconnect the appliance before beginning work
• Handle porcelain-coated parts carefully to avoid chipping; avoid overtightening fasteners