Hardware Hand Small Engine Regular Starter Parts
Genuine Frigidaire part
By: Frigidaire
Part Number: 316418900
Replacement screw secures panels, trim, and internal components in your appliance. Needed when original fastener is missing, stripped, or damaged.
More
$13.54
- Compare At:
-
$14.89
- You Save:
-
$1.35
Genuine Whirlpool part
By: Whirlpool
Part Number: 8169479
This replacement screw secures appliance panels, brackets, or internal components to keep them tight and aligned. Replace a missing, stripped, or damaged fastener to restore a solid, rattle-free fit and reliable operation.
- Fastens parts to the cabinet or frame to prevent movement
- Replaces missing, stripped, or corroded hardware that can cause looseness, vibration, or noise
- Helps correct gaps or misalignment after service
- Maintains proper support for covers, trims, or brackets
What's included: 1 screw Install notes:
- Disconnect power; shut off gas/water if applicable before servicing
- Match screw length and location to the original position
- Start threads by hand to avoid cross-threading; tighten snugly without overtightening
- Repair or replace damaged clips/inserts before installing the new screw
Do-It-Yourself Stories from Customers like You
No Catherine S. • Grants Pass , OR • November 15, 2014
Yes
Read more
More
$7.56
- Compare At:
-
$8.90
- You Save:
-
$1.34
Genuine Whirlpool part
By: Whirlpool
Part Number: WP74007840
Fixes burner that won't heat or stays on one temperature. This infinite switch restores variable heat control to your cooktop surface element.
Do-It-Yourself Stories from Customers like You
Burners did not work following a wire (looped over an edge of the box for the switches shorted out i'm guessing it was that way from the factory Bruce H. • Lenexa , KS • September 20, 2015
Replaced shorted wire and blown switches.
Read more
More
$135.46
- Compare At:
-
$161.20
- You Save:
-
$25.74
Genuine Samsung part
By: Samsung
Part Number: DE26-00122B
Microwave making loud buzzing noise during operation? The high voltage transformer converts power to the magnetron. Moderate DIY repair, 1-2 hours.
This part fixes the following symptoms
-
shuts off after a few seconds
See more...
Do-It-Yourself Stories from Customers like You
Samsung over the range microwave buzzing noise while heating Jesse P. • Sparks , NV • December 10, 2016
Ordered replacement transformer from appliance part pros.Found a video on youtube showing start to finish of how to remove and replace over the range microwave transformer. Received part amazingly fast, took about 45 minutes from start to finish to install new part. Microwave is like new, loud buzzing noise is gone! Thanks guys and a merry Christmas to all!
Read more
More
$182.95
- Compare At:
-
$217.71
- You Save:
-
$34.76
Genuine Lg part
By: Lg
Part Number: EAE58905701
Fix a refrigerator that won't start or hums but doesn't run with this compressor start capacitor. Restores reliable cooling when the compressor fails to start.
Do-It-Yourself Stories from Customers like You
The refrigerator was not cooling in the refrigerator side but the freezer is okay. Rosalio P. • La Mirada , CA • April 30, 2022
Now it was running smoothly with the additional temperatures that I replace in the Freezer side
and the refrigerator side. Also,replaced the capacitors for the compressors to start the systems. Set up the temperature to 4 degree F Freezer side and 45 degree F on the Refrigerator side.
Is okay now and Thank you for all the parts and all your groups help and information.
Thanks again.
Read more
More
$79.95
- Compare At:
-
$95.94
- You Save:
-
$15.99
Genuine Ge part
By: Ge
Part Number: WB01K10093
This speed nut is a clip-on fastener that provides threads for a screw on the appliance. It secures sheet-metal panels, brackets, or trim and helps keep assemblies tight under vibration and repeated use.
- Provides captive threads so a screw can tighten into thin sheet metal
- Helps secure panels, brackets, and trim pieces in place
- Replace if a screw spins without tightening, a panel rattles/feels loose, or the original clip is missing or damaged
- Restores a snug, reliable attachment point without a loose nut
What's included: One speed nut Install notes:
- Disconnect power and, if applicable, shut off gas; allow the appliance to cool before servicing
- Note the clip's orientation; slide it onto the panel edge or stud as designed
- Start the screw by hand to avoid cross-threading; do not overtighten
- Wear cut-resistant gloves when handling sheet-metal parts
More
$7.95
- Compare At:
-
$9.46
- You Save:
-
$1.51
Genuine Ge part
By: Ge
Part Number: WB02T10324
6-20 x 3/8 inch nickel screw secures trim panels, brackets, and small components in dishwashers and ovens. Replace missing or stripped screws.
Do-It-Yourself Stories from Customers like You
Faceplate coming loose on GE oven. Phillip S. • Tulsa , OK • November 10, 2021
Replaced all of the control parts for the GE oven.
Read more
More
$9.88
- Compare At:
-
$11.41
- You Save:
-
$1.53
Genuine Frigidaire part
By: Frigidaire
Part Number: 316069301
Secures the gas burner assembly to the cooktop base. Replace stripped, rusted, or missing screws to eliminate burner wobble and maintain proper alignment.
Do-It-Yourself Stories from Customers like You
Igniter housing attachment corroded away John V. • East Quogue , NY • January 13, 2017
The constant cooking and age of the appliance I repaired corroded the housing attachment that holds the igniter in place to the burner. Also the screws that hold the burner in place to the stove cover were also corroded which caused the burner itself to not stay in place but fall into the stove. By using a screw driver, lift up on the sides of the stove cover to pop the clips that hold it in place. Use a block of wood to hold up the stove cover. On the model I worked on, the igniter removes...
Read more
More
$5.74
- Compare At:
-
$5.89
- You Save:
-
$0.15
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304451561
Replacement mounting screw secures panels, trim, and components in microwaves. Needed when original screws are stripped, missing, or lost during repairs.
Do-It-Yourself Stories from Customers like You
The handle to my microwave was broken off David M. • Auburn , MA • May 09, 2018
I ordered a replacement handle from Appliance Parts Pro.com and installed it after watching the video at their site for a similar model. The video told of the trick on removing the door surround that allowed me to access the handle screws. I purchased new handle screws at the same time I bought the new handle. The new handle and screws were a bit different than the original but fit perfectly. Hopefully it will be more durable than the original handle.
Read more
More
$13.78
- Compare At:
-
$15.54
- You Save:
-
$1.76
Genuine Ge part
By: Ge
Part Number: WB01X23501
Genuine Ge part
By: Ge
Part Number: WB1X5731D
Includes 12 screws.
Do-It-Yourself Stories from Customers like You
Broken front glass door Roni T. • Sayreville , NJ • February 12, 2019
I was very pleased to get the glass on time and it was a perfect match. The only thing I had trouble was to get the screws required to fix. The screws were not available, so spend too much time trying find equivalent screws in homedepot.
Read more
More
$25.74
- Compare At:
-
$30.89
- You Save:
-
$5.15
Genuine Whirlpool part
By: Whirlpool
Part Number: WP3405156
This rotary on/off switch controls the dryer's Finish Guard (also called Wrinkle Guard/Wrinkle Shield) feature. Replacing it restores proper control of the post-cycle intermittent tumbling that helps reduce wrinkles, preventing the feature from being stuck on or off.
- Provides 2-position on/off selection for the Finish Guard/Wrinkle Guard function
- Failure can cause the feature not to engage or to stay on after the cycle ends
- Knob may feel loose or fail to click when the switch is worn
- Mounts in the control console and interfaces with the external selector knob
What's included: 1 rotary switch Installation notes:
- Disconnect power before servicing
- Access through the control console; remove paneling as needed
- Transfer wires one at a time or photograph connections for reference
- Reinstall using the existing knob and mounting hardware
More
$69.95
- Compare At:
-
$83.24
- You Save:
-
$13.29
Genuine Ge part
By: Ge
Part Number: WZ5X219D
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304414648
Replacement mounting screw that secures panels, trim, and components in ranges and ovens. Needed when original screws are lost, stripped, or damaged.
More
$13.54
- Compare At:
-
$14.89
- You Save:
-
$1.35
Genuine Samsung part
By: Samsung
Part Number: DE92-90505G
Securely install your microwave with this mounting hardware kit. Includes brackets and bolts needed for wall or cabinet installation. Perfect replacement for lost, missing, or incomplete mounting hardware.
Do-It-Yourself Stories from Customers like You
Needed mounting hardware bulb and glass for the bulb Walter E. • Austin , TX • November 12, 2018
Purchased the hardware and mounted the unit myself. The operator who helped me make the purchase was fantastic and deserves a raise.
She spent the time with me to understand how the mounting bracket I already had worked in mounting the unit.
If you know who she is please tell her thank you from me!!
Read more
More
$35.95
- Compare At:
-
$42.42
- You Save:
-
$6.47
Genuine Ge part
By: Ge
Part Number: WB01K10091
Panel mounting screw secures trim, bezels, and internal components on ranges and cooktops. Replace when stripped, corroded, or missing to restore fit.
Do-It-Yourself Stories from Customers like You
Lower oven would not ignite. Gary P. • Randolph , NJ • March 19, 2017
Replaced the ignitor glow bar and deflector oven (which had a hole burned through it). Screws stripped upon disassembly of original deflector oven and needed to be replaced as well.
Read more
More