Stud Parts

This adapter connects the appliance's water supply line to the inlet fitting, providing a secure watertight connection to restore proper water flow. Use it when the original coupling is damaged, cracked, or leaking. What it does:

• Adapts and secures a water supply/hose to the appliance inlet fitting.
• Restores a proper connection to prevent leaking at the hose junction.
• Addresses symptoms such as visible leaks, intermittent water flow, or a loose hose connection.
• Works as a direct replacement for a damaged or corroded inlet adapter.

• Turn off water supply and unplug the appliance before installing.
• Inspect seals and replace any damaged washers or O-rings; tighten fittings by hand then snug with an appropriate tool—do not overtighten.
• Check for leaks after restoring water and power; re-tighten if necessary.

Lower rack roller for dishwashers. Mounts to the bottom rack to allow smooth gliding in and out. Replace if cracked, broken, or wheels no longer spin freely.

Upper rack roller wheel for dishwashers. Mounts on the upper dish rack to enable smooth rolling on side rails. Replace if cracked, broken, or worn out.

Replaces a worn, damaged, or misaligned dryer motor pulley. Guides the drive belt and transfers motor power to the drum for proper rotation.

Protective cap stud cover for washer dryer combo units. Shields electrical or mechanical studs from debris and maintains secure connections. Replace if cracked, broken, or missing.

Grounding stud for top-load washers. Connects electrical ground wire to washer frame. Replace if stripped, corroded, or missing for proper grounding.

Replace cracked, broken, or missing dishwasher rack roller wheels. Snaps onto bottom or top rack to restore smooth gliding. Easy DIY installation.

This is a replacement dishwasher rack assembly with factory-installed wheels. It restores smooth sliding and safe loading when the original rack is bent, rusted, or missing rollers—helping the rack glide properly and keep items positioned during the wash.

• Holds and organizes dishes, glasses, and cookware during cycles
• Integrated wheels ride on the tracks for easy loading and unloading
• Replace if tines are rusted/broken, wheels are cracked or missing, or the rack derails
• Helps prevent items from tipping and maintains consistent spray coverage

• Disconnect power to the dishwasher before servicing
• Open the door, extend the rack, release any rail end-stops, and remove the old rack
• Transfer any removable accessories from the old rack to the new one, if needed
• Slide the new rack onto the rails and reinstall end-stops; verify smooth operation

Replacement roller for dishwasher racks. Installs on the rack guide rails to allow smooth gliding in and out. Needed when rollers are cracked or worn.

The Lower Dishrack Roller Assembly is an OEM part for Whirlpool dishwashers. As an integral component, the lower dishrack roller assembly supports smooth movement and positioning of the lower dishrack. Its precision ball bearings allow for effortless extension and retraction of the lower rack.

Causes of a bad lower dishrack roller assembly can include wear and tear of bearings over time, stripped or damaged rails, or failure of rollers due to excessive loading.  

Symptoms of a bad lower dishrack roller assembly include:

• Difficulty extending or retracting the lower dishrack  
• Noisy or stuck operation of the lower rack
• Rack failing to remain securely in place during wash cycles
• Dishes shifting or falling during wash due to uneven support

This OEM Whirlpool part is also compatible with KitchenAid, Jenn-Air, Amana, Kenmore, and some Maytag and GE dishwashers. 

Mounts to the dishwasher's inner tub wall to guide the rack as it slides in and out. Replace worn or broken wheels to restore smooth rack movement.

Drum roller assembly for dryers. Mounts to the rear panel to support smooth drum rotation. Replace if worn, squeaking, cracked, or causing wobble.

The Dishrack Roller Assembly is an OEM part for LG dishwashers. This assembly features wheels that the upper dishrack glides on smoothly during each wash cycle.

Causes for a bad assembly can include worn or damaged rollers that do not spin freely. Over time and prolonged use, harsh detergents may also corrode roller mechanics.

Symptoms of a bad dishrack roller assembly include:

• The upper dishrack getting stuck and not fully extending
• Difficulty loading or unloading the top rack
• Excess friction causes noisy operation

Scratches or damage to dishes from tight rollers
This OEM LG part is also compatible with some Kenmore models.

Supports and helps rotate the dryer drum smoothly. Replace when roller is worn, damaged, or causing friction. Installs on the drum support system.

Motor pulley for dryers. Mounts on the motor shaft to drive the drum belt. Replace if cracked, worn, or causing belt slippage during operation.