Icemaker Parts

This coupling is the small connector that links a drive motor to its mating component, transferring rotation so the appliance operates smoothly. Replacing a cracked or stripped coupling restores reliable drive and helps prevent further wear.

• Connects the motor shaft to the driven part to transmit torque
• Maintains alignment to reduce wobble and slippage
• Failure signs can include no movement, intermittent operation, clicking/grinding, or visible cracks/rounding
• Restores consistent motion of the connected part once replaced

• Disconnect power (and shut off water/gas if applicable) before servicing
• Access the drive area and remove any covers/tray/drive components as needed
• Pull the old coupling straight off the keyed or D-shaped shaft; clean and inspect the shaft
• Align and press the new coupling fully onto the shaft, reassemble, and test

This ice bin assembly stores the cubes your icemaker produces and makes them easy to access or dispense. Replacing a cracked or worn bin prevents spills and jams and keeps your refrigerator's ice service working smoothly.

• Collects and holds ice produced by the icemaker
• Slides in and out for convenient ice access
• Helps prevent stray cubes and spills inside the freezer
• Common symptoms of failure: cracked or broken bin, ice spilling, difficulty dispensing or removing ice

• Disconnect power before servicing for safety
• Empty and remove the old bin per your model's procedure
• Seat the new bin fully on its rails or locator tabs
• Restore power, make a small batch of ice, and check operation

This ice maker assembly replaces the complete cube-making unit in your refrigerator. It restores automatic freezing, harvesting, and bin-level shutoff so your appliance can reliably produce a steady supply of ice again.

• Freezes water in the mold and ejects cubes into the ice bin during each harvest cycle
• Pauses production when the bin is full via the built-in shutoff mechanism
• Typical failure symptoms: no ice production, cubes not ejecting or stuck mid-cycle, intermittent clicking/grinding from the module
• Can replace a cracked or seized ice mold assembly that jams or leaks at the icemaker

• Disconnect power and shut off the refrigerator's water supply before servicing
• Remove the ice bin; loosen mounting screws and unplug the wire harness to release the old unit
• Transfer any mounting brackets or covers from the original unit if needed; reuse existing hardware
• Restore power and water; ensure the fill tube is clear and allow the icemaker to begin cycling

The Icemaker is an OEM component specifically designed for Whirlpool refrigerators. As the name implies, it is responsible for automatically producing ice through the process of harvesting and manufacturing. The icemaker freezes water into individual ice cubes and deposits them into the ice bin.

Causes of a bad icemaker can include clogged or frozen water lines preventing proper water flow, malfunctioning electronic controls that fail to trigger harvesting and freezing cycles, or damage and wear to mechanical components like gears or augers.  

Symptoms of a bad icemaker include:

• No ice production over multiple cycles  
• Inconsistently sized or misshapen cubes
• Cubes that fuse together or fail to eject properly
• Leaks or drips from the icemaker area
• Loud knocking or grinding noises during the operation

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Ice Cube Tray is an OEM part for Whirlpool refrigerators. This tray is designed to fit securely in the freezer compartment and is used to form and hold ice cubes. The tray ensures that ice cubes are consistently shaped and easily removable for everyday use. The tray measures about 8-1/2 inches wide by 11 inches deep.

Over time, ice cube trays can become damaged or worn due to repeated use, exposure to cold temperatures, or mishandling. Cracks or warping in the tray can lead to leaks or difficulties in removing the ice cubes.

Symptoms of a bad ice cube tray include:

• Cracked or broken sections
• Difficulty in removing ice cubes
• Leaks or water pooling in the freezer
• Misshapen or irregular ice cubes

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

The Refrigerator Ice Guide Assembly is essential for maintaining smooth ice dispensing in your Samsung refrigerator. This genuine OEM part ensures that ice cubes flow efficiently from the ice maker to your desired location, enhancing the overall functionality of your appliance. Designed specifically for Samsung refrigerators, the Refrigerator Ice Guide Assembly guarantees a secure fit and seamless integration with your existing system. Its durable construction prevents jams and minimizes ice dispensing issues, providing a reliable solution for your kitchen needs. Installing this genuine OEM part restores the optimal performance of your ice dispensing feature, ensuring you enjoy fresh ice whenever you need it. Whether your original ice guide is cracked, broken, or no longer functioning correctly, the Refrigerator Ice Guide Assembly offers a straightforward and effective replacement. Enhance your refrigeratorGÇÖs performance and enjoy the convenience of consistent ice flow with this high-quality, customer-focused replacement part.

This replacement ice container assembly stores and delivers ice from the freezer to the dispenser. Replacing a cracked or jammed bin restores smooth cubed/crushed dispensing and dependable ice flow.

• Holds harvested ice in the freezer and interfaces with the dispenser
• Feeds ice toward the chute when you press the dispenser lever
• Supports cubed or crushed selections (as designed for your model)
• Common symptoms: won't dispense, dispenses slowly, only cubes or only crushed, cracked/warped bucket, grinding or jamming noises

• Unplug the refrigerator and wear cut-resistant gloves
• Empty remaining ice, release and lift out the old bin, then slide the new assembly fully into place
• Restore power and test both cube and crush functions at the dispenser

This is a replacement ice maker assembly kit for refrigerators. The ice maker is responsible for several different functions. It catches water from the inlet valve and holds it while it freezes into ice cubes. When the cubes are frozen, the ice maker rotates and the cubes dump into the tray below. Ice makers include a number of moving parts and can suffer from significant wear and tear over time. Eventually, gears will wear down, electrical contacts may corrode, and the entire assembly will need to be replaced. Signs the ice maker needs to be replaced include water leaking into the ice tray and no ice being made. Replacing the ice maker assembly will require unplugging the refrigerator, turning off the water, and accessing the freezer. Disconnect the water line, then locate the mounting screws and remove them. Remove the old ice maker and replace it with the new one.This is a genuine OEM part manufactured by LG. It is sold individually.

Optional flexible ice tray for those that dont have an icemaker

The Refrigerator Ice Scoop is an essential accessory for maintaining the functionality of your Samsung refrigerator. Crafted as a genuine OEM part, this ice scoop ensures a perfect fit and reliable performance with your appliance. Designed for ease of use, the scoop allows you to effortlessly retrieve ice from your freezer, enhancing your daily kitchen experience. Its sturdy construction provides durability, ensuring long-lasting use without compromising on quality. The ergonomic handle offers a comfortable grip, making it simple to scoop ice without spills or mess. By choosing the Refrigerator Ice Scoop , you are investing in a component that seamlessly integrates with your Samsung refrigerator, maintaining its original performance standards. This genuine OEM part not only restores the ice dispensing functionality but also helps in keeping your kitchen organized and efficient. Easy to install, the ice scoop is a practical solution for anyone looking to replace a worn or missing part, ensuring your refrigerator continues to operate smoothly and effectively.

This ice container assembly collects and stores cubed ice produced by the freezer's ice maker, keeping ice contained and ready for dispensing or manual use. Durable molded design fits into the ice maker cavity and funnels ice into the dispenser area. What it does:

• Holds and contains ice made by the ice maker so ice stays organized and accessible
• Guides ice toward the dispenser or auger, helping ensure consistent flow
• Replaces cracked, warped, or damaged containers that cause ice jams or leaks
• Helps reduce spillage when removing or emptying the ice bucket

• Disconnect power to the refrigerator before beginning service
• Empty ice from the bucket and remove any loose ice before removal
• Handle the molded plastic carefully to avoid cracking; install until it seats securely

This refrigerator ice maker assembly automatically fills, freezes, and ejects cubes into the storage bin. Replace it to restore dependable ice production when the original unit stops making ice, won't harvest, leaks from the mold, or overfills. What it does

• Performs automatic fill, freeze, and harvest cycles to produce ice
• Controls water-fill timing for each cycle
• Stops ice production when the bin is full
• Common symptoms: no ice production, won't eject/harvest, overfilling or dripping from the ice maker, loud clicking/jammed ejector

• Ice maker assembly (1)

• Disconnect power and turn off the refrigerator's water supply before servicing
• Remove the ice bin/cover, unfasten mounting screws, and disconnect the wire harness
• Position the new assembly, align with the fill tube, reconnect the harness, and secure with screws
• Restore power and water; check for proper alignment and allow time for ice production to normalize

This ice maker assembly produces and harvests ice for compatible refrigerators, replacing a failed or damaged ice-making unit to restore normal ice production and cycling. Designed as a direct-replacement service part for units that use this OEM assembly. What it does:

• Forms, freezes, and harvests ice automatically as part of the freezer's ice-making cycle.
• Common symptoms it addresses: little or no ice production, ice maker not cycling, or ice trays not filling.
• Works with the refrigerator's water inlet and control signals to dump ice into the bin when ready.
• Replaces a defective ice-making module to stop intermittent operation or visible damage to the ice tray.

• Disconnect power and shut off the water supply before beginning replacement.
• Remove the ice bin and interior trim panels as needed to access the ice maker; keep track of mounting screws.
• Disconnect the wiring harness and water inlet tube carefully; avoid forcing connectors or pinch points.
• After installation, restore power and water, check for leaks, and run the ice-maker test/diagnostic cycle per the refrigerator's service instructions.

This ice container assembly catches and stores ice from the icemaker so you have a ready supply on hand. It replaces a cracked, missing, or damaged bin to keep ice contained and feeding properly. What it does:

• Collects and holds ice produced by the icemaker to prevent spilling inside the freezer.
• Guides ice toward the dispenser or access area for reliable dispensing/storage.
• Replaces bins that are cracked, warped, or no longer securing ice properly.
• Helps prevent ice from falling onto shelves or into other compartments.

• Disconnect power to the refrigerator before servicing to avoid injury.
• Remove any remaining ice and shelves that block access before replacing the bin.
• Slide the new bin into the tracks or mounting points until it seats securely.

This ice container catches and stores ice from the refrigerator icemaker so cubes stay contained and easy to access. Replacing a damaged bin restores tidy ice collection and prevents spills inside the freezer. What it does:

• Collects and stores ice produced by the icemaker, keeping cubes contained and accessible.
• Fits into the freezer icemaker housing to position under the dispenser or harvest area.
• Common symptoms indicating replacement: cracked or warped bin, ice spilling onto the shelf, or ice that won't stay contained.
• Durable plastic construction keeps ice sanitary and helps prevent unnecessary mess.

• Disconnect power to the refrigerator before starting to avoid injury.
• Empty the old ice and remove any retaining clips or fasteners, then slide the replacement bin into the housing until it seats.
• Do not force the bin into place; ensure the icemaker arm and related components clear the bin and that it sits level.

This replacement ice cube tray is a direct-fit plastic tray designed to hold and release ice cubes in compatible top- or bottom-freezer refrigerators. Restores convenient ice storage and simple manual ice removal. What it does:

• Holds water in separate cavities so ice cubes form evenly.
• Flexes slightly for easier ice release to reduce twisting or chipping.
• Replaces cracked, warped, or missing trays that cause leaking or uneven freezing.
• Helps prevent contamination from freezer debris when used as intended.

• Remove old tray and wipe area clean before installing the new tray.
• Fill tray with water on a level surface and place flat in the freezer to freeze.
• Handle carefully when removing ice to avoid spills; do not force with sharp tools.
• Clean tray before first use and as needed; follow refrigerator manufacturer's care guidance.